Influence of conventional and organic agricultural practices on the phenolic content in eggplant pulp: Plant-to-plant variation

Consumer awareness, pesticide and fertiliser contaminations, and environmental concerns have resulted in significant demand for organically grown farm products. The present study evaluates the influence that organic and conventional farming practices exert on the total phenolic content in eggplant samples from two cultivars, Blackbell (American eggplant) and Millionaire (Japanese eggplant), grown by conventional and organic farming practices with similar climatic conditions. In addition, plant-to-plant variation in phenolic content was determined from eight eggplant samples collected from different plants grown at various field positions. Samples were separately assayed for phenolic content by the two independent procedures, HPLC/LC–MS and Folin–Ciocalteu assay. The results of the HPLC analysis showed significant plant-to-plant variation (% RSD ranged from 22% to 48%) in 5-caffeoylqunic acid content (the most abundant phenolic acid) in eight eggplant samples collected from eight different plants belonging to the same cultivar and grown under similar conditions. The cv. Millionaire showed a higher total phenolic content compared to the Blackbell cultivar. We did not observe significant consistent trend in the phenolic content of eggplant samples grown with organic and conventional farming practices with both eggplant cultivars. We, however, observed a strong correlation (R² = 0.87) between total phenolic content as assayed by Folin–Ciocalteu assay and 5-caffeoylqunic acid, a major phenolic acid in eggplant extract. This study concludes that multiple repetitive analyses of plant products collected from different plants grown over various time periods (seasons) at different locations should always be carried to unambiguously prove the impact of growing conditions on phenolic content or antioxidant activity.     

Fungal Infection Reduces Herbivore-Induced Plant Volatiles of Maize but does not Affect Naïve Parasitoids

Plants attacked by insects release volatile compounds that attract the herbivores' natural enemies. This so-called indirect defense is plastic and may be affected by an array of biotic and abiotic factors. We investigated the effect of fungal infection as a biotic stress agent on the emission of herbivore-induced volatiles and the possible consequences for the attraction of two parasitoid species. Maize seedlings that were simultaneously attacked by the fungus Setosphaeria turcica and larvae of Spodoptera littoralis emitted a blend of volatiles that was qualitatively similar to the blend emitted by maize that was damaged by only the herbivore, but there was a clear quantitative difference. When simultaneously challenged by fungus and herbivore, the maize plants emitted in total 47% less of the volatiles. Emissions of green leaf volatiles were unaffected. In a six-arm olfactometer, the parasitoids Cotesia marginiventris and Microplitis rufiventris responded equally well to odors of herbivore-damaged and fungus- and herbivore-damaged maize plants. Healthy and fungus-infected plants were not attractive. An additional experiment showed that the performance of S. littoralis caterpillars was not affected by the presence of the pathogen, nor was there an effect on larvae of M. rufiventris developing inside the caterpillars. Our results confirm previous indications that naïve wasps may respond primarily to the green leaf volatiles.     

Effect of composition and promoters in Au/TS-1 catalysts for direct propylene epoxidation using H2 and O2

A series of Au/titanium silicalite-1 (TS-1) catalysts with different Si/Ti ratios and promoted with alkali and alkaline earth cations were prepared by deposition–precipitation (DP) and tested for direct propylene epoxidation. It was found that the gold loading and catalytic activity was highly dependent on the pH of the DP synthesis solution and the final composition of the catalyst. Addition of Group 1 metals such as K or Cs had little effect on the gold content, but increased activity, while Group 2 metals such as Mg, Ca, Sr, and Ba increased both the gold content and the catalytic activity. The highest improvement was provided by a Mg promoted catalyst, which at 443 K and 0.1 MPa with a H₂/O₂/C₃H₆/Ar = 1/1/1/7 feed mixture gave a propylene oxide (PO) formation rate of 88 gPO h⁻¹ kg_cat⁻¹, compared to 57 gPO h⁻¹ kg_cat⁻¹ for an unpromoted catalyst, corresponding to a 50% enhancement of activity. Ammonia temperature-programmed desorption (NH₃-TPD) measurements indicated little change in adsorption amount with promotion indicating that the yield increase was not due to the elimination of acidic sites on the catalyst. Instead, the improved catalytic performance was ascribed to increased Au capture efficiency and dispersion by the catalyst. The effect of Si/Ti ratio, pH of synthesis, and the promoter ions on the gold content could be understood from their effect on the surface charge of the support.     

Wind-induced dust generation and transport mechanics on a bare agricultural field

Strong atmospheric winds may cause wind erosion and dust emissions on bare, dry, erodible fields. Since these dust emissions may exceed particulate matter limits established by the United States Environmental Protection Agency, information on dust generation and transport mechanics is needed to determine the particulate hazard of dust sources. Measurements of climatic variables and airborne sediment mass and concentration were made during three strong wind events on a bare, fine sandy loam field in west Texas. This study clearly shows that dust flux estimates were very sensitive to dust concentration measurement height. PM10 flux values estimated between heights of 2 and 5m were 2-5 times those estimated between heights of 5 and 10 m. Tower placement in relation to the upwind unerodible boundary produced significant differences in dust flux that varied with storm intensity. During the most intense storm event, the PM10 flux between heights of 2 and 5m measured at the tower 200 m from the unerodible boundary was almost 2.5 times as that measured at the tower 100 m from the unerodible boundary. Vertical PM10 dust flux was closely related with horizontal sediment flux only when the winds came from the same direction during the entire duration of horizontal sediment flux measurements.     

单片IC实现IrDA和RS-232通信

概述 为提高数据的传输速率、方便用户操作,现代电子设备常常采用新型接口电路实现数据通信,IrDA利用无线方式进行数据通信,操作简单,是目前接口设计的优选方案之一.实际应用中,有些设备并不支持新型接口电路,需要设计方案向下兼容、支持传统的RS-232接口,这时仅采用一种接口方案无法满足系统要求,正是考虑到这一需求,现代产品往往同时支持IrDA和RS-232两种接口标准.     

Rehydration of active dried yeast: impact on strength and stiffness of yeast cells measured using microelectromechanical systems

This study investigated the rehydration of active dried yeast and the impact of temperature and wort density on the strength and stiffness of individual cells using a microelectromechanical system. Dried yeast was rehydrated using a variety of methods, including direct pitching into wort (13.6°P) at 12, 22 and 30°C, as well as propagation using YEPD media (4.2°P). Cell viability was found to broadly correlate with measurement of cell strength and stiffness. Both wort density and temperature affected viability and physical characteristics of the cells after 1 h of rehydration. Yeast cells rehydrated at low temperature and high wort density burst at a lower force (0.26 ± 0.02 μN) than cells rehydrated using high temperature and low density media (0.50 ± 0.10 μN). Cells rehydrated at higher temperatures or using low density media showed no significant difference in strength and stiffness when compared with high viability, actively fermenting yeast. Changes in yeast physiology, owing to stress responses, may contribute to the observed differences in mechanical properties. These findings have application in brewery design, as pumping, centrifugation, storage and associated shear impart mechanical stress upon yeast cells. © 2018 The Institute of Brewing & Distilling     

LC-MS–MS characterisation of curry leaf flavonols and antioxidant activity

Curry leaf (Murraya koenegii) is a common flavouring agent in Indian foods. This study characterised the flavonol profile of curry leaf extracted with different solvents and the relative antioxidant capacity of these extracts by quantifying phenolic constituents. Flavonols were extracted using ethanol, methanol, or acetone prior to identification and quantification using liquid chromatography coupled to atmospheric pressure chemical ionisation (APCI) mass spectrometry in tandem mode (LC-MS–MS) with negative ion detection. Major curry leaf flavonols included myricetin-3-galactoside, quercetin-O-pentohexoside, quercetin-3-diglucoside, quercetin-3-O-rutinoside, quercetin-3-glucoside, quercetin-3-acetylhexoside, quercetin-O-xylo-pentoside, kaempferol-O-glucoside, and kaempferol-aglucoside. Lag-time and TBARS tests demonstrated that curry leaf phenolics prevent cupric-ion induced oxidation of LDL. The best extraction yield was obtained with 80% ethanol. Acetone extracts provided better antioxidant activity expressed as increased lag-time formation, than did ethanol or methanol extracts. Curry leaf is a rich source of flavonols that have biological activity in vitro and further studies are warranted in regards to the potential health benefits and identification of the novel flavonols whose identities remain unknown.     

Design of a high-temperature and high-pressure liquid flow cell for x-ray absorption fine structure measurements under catalytic reaction conditions

The design and performance of a new high-pressure and high-temperature cell for measurement of x-ray absorption fine structure (XAFS) spectra of solid catalysts working in a flowing liquid are presented. The cell has flat, high-purity sintered cubic boron nitride (c-BN) windows which can tolerate high temperature (900 K) and high pressure (10 MPa). The c-BN is a new material which has the highest tensile strength, second only to diamond, and is also chemically and thermally stable. The use of the cell is demonstrated for measurements of PtPdAl(2)O(3) and Ni(2)PSiO(2) hydrodesulfurization catalysts at reaction conditions. A technique called delta chi (Deltachi), involving determining the difference between XAFS spectra of the sample at reaction conditions and the bare sample, is introduced.     

Intrusive probes in riser applications

Many of the probes used to understand hydrodynamics in circulating fluidized bed risers intrude into the environment they are measuring, although assumptions are typically asserted that the intrusive probes do not affect the data collected. This could be a poor assumption in some cases and conditions. We found that intrusive fiber‐optic probe measurements consistently mis‐predicted the solids concentration compared to the nonintrusive pressure drop measurements outside the fully developed flow region of a riser containing fluid catalytic cracking catalyst or glass bead particles. The discrepancy was sensitive to superficial gas velocity, solid circulation rate, probe position, and flow direction. Barracuda VR? computational fluid dynamics simulations confirmed this, and indicated that particle momentum was lost at the leading edge of the probe and particles were spilling over to the probe tip. Accordingly, new probe designs were proposed to mitigate the intrusiveness of a fiber‐optic probe for more accurate characterization. © 2017 American Institute of Chemical Engineers AIChE J, 63: 5361–5374, 2017