Superior Cerebellar Atrophy: An Imaging Clue to Diagnose ITPR1-Related Disorders

The inositol 1,4,5-triphosphate receptor type 1 (ITPR1) gene encodes an InsP₃-gated calcium channel that modulates intracellular Ca²⁺ release and is particularly expressed in cerebellar Purkinje cells. Pathogenic variants in the ITPR1 gene are associated with different types of autosomal dominant spinocerebellar ataxia: SCA15 (adult onset), SCA29 (early-onset), and Gillespie syndrome. Cerebellar atrophy/hypoplasia is invariably detected, but a recognizable neuroradiological pattern has not been identified yet. With the aim of describing ITPR1-related neuroimaging findings, the brain MRI of 14 patients with ITPR1 variants (11 SCA29, 1 SCA15, and 2 Gillespie) were reviewed by expert neuroradiologists. To further evaluate the role of superior vermian and hemispheric cerebellar atrophy as a clue for the diagnosis of ITPR1-related conditions, the ITPR1 gene was sequenced in 5 patients with similar MRI pattern, detecting pathogenic variants in 4 of them. Considering the whole cohort, a distinctive neuroradiological pattern consisting in superior vermian and hemispheric cerebellar atrophy was identified in 83% patients with causative ITPR1 variants, suggesting this MRI finding could represent a hallmark for ITPR1-related disorders.     

NMDA and P2X7 Receptors Require Pannexin 1 Activation to Initiate and Maintain Nociceptive Signaling in the Spinal Cord of Neuropathic Rats

Pannexin 1 (Panx1) is involved in the spinal central sensitization process in rats with neuropathic pain, but its interaction with well-known, pain-related, ligand-dependent receptors, such as NMDA receptors (NMDAR) and P2X7 purinoceptors (P2X7R), remains largely unexplored. Here, we studied whether NMDAR- and P2X7R-dependent nociceptive signaling in neuropathic rats require the activation of Panx1 channels to generate spinal central sensitization, as assessed by behavioral (mechanical hyperalgesia) and electrophysiological (C-reflex wind-up potentiation) indexes. Administration of either a selective NMDAR agonist i.t. (NMDA, 2 mM) or a P2X7R agonist (BzATP, 150 μM) significantly increased both the mechanical hyperalgesia and the C-reflex wind-up potentiation, effects that were rapidly reversed (minutes) by i.t. administration of a selective pannexin 1 antagonist (10panx peptide, 300 μM), with the scores even reaching values of rats without neuropathy. Accordingly, 300 μM 10panx completely prevented the effects of NMDA and BzATP administered 1 h later, on mechanical hyperalgesia and C-reflex wind-up potentiation. Confocal immunofluorescence imaging revealed coexpression of Panx1 with NeuN protein in intrinsic dorsal horn neurons of neuropathic rats. The results indicate that both NMDAR- and P2X7R-mediated increases in mechanical hyperalgesia and C-reflex wind-up potentiation require neuronal Panx1 channel activation to initiate and maintain nociceptive signaling in neuropathic rats.     

Nutritional Calcium Supply Dependent Calcium Balance,Bone Calcification and Calcium Isotope Ratios in Rats

Serum calcium isotopes (δ^44/42Ca) have been suggested as a non-invasive and sensitive Ca balance marker. Quantitative δ^44/42Ca changes associated with Ca flux across body compartment barriers relative to the dietary Ca and the correlation of δ^44/42Ca_Serum with bone histology are unknown. We analyzed Ca and δ^44/42Ca by mass-spectrometry in rats after two weeks of standard-Ca-diet (0.5%) and after four subsequent weeks of standard- and of low-Ca-diet (0.25%). In animals on a low-Ca-diet net Ca gain was 61 ± 3% and femur Ca content 68 ± 41% of standard-Ca-diet, bone mineralized area per section area was 68 ± 15% compared to standard-Ca-diet. δ^44/42Ca was similar in the diets, and decreased in feces and urine and increased in serum in animals on low-Ca-diet. δ^44/42Ca_Bone was higher in animals on low-Ca-diet, lower in the diaphysis than the metaphysis and epiphysis, and unaffected by gender. Independent of diet, δ^44/42Ca_Bone was similar in the femora and ribs. At the time of sacrifice, δ^44/42Ca_Serum inversely correlated with intestinal Ca uptake and histological bone mineralization markers, but not with Ca content and bone mineral density by µCT. In conclusion, δ^44/42Ca_Bone was bone site specific, but mechanical stress and gender independent. Low-Ca-diet induced marked changes in feces, serum and urine δ^44/42Ca in growing rats. δ^44/42Ca_Serum inversely correlated with markers of bone mineralization.     

Evaluation and Characterization of Post-Stroke Lung Damage in a Murine Model of Cerebral Ischemia

After stroke and other brain injuries, there is a high incidence of respiratory complications such as pneumonia or acute lung injury. The molecular mechanisms that drive the brain-lung interaction post-stroke have not yet been elucidated. We performed transient middle cerebral artery occlusion (MCAO) and sham surgery on C57BL/6J mice and collected bronchoalveolar lavage fluid (BALF), serum, brain, and lung homogenate samples 24 h after surgery. A 92 proteins-panel developed by Olink Proteomics^® was used to analyze the content in BALF and lung homogenates. MCAO animals had higher protein concentration levels in BALF than sham-controls, but these levels did not correlate with the infarct volume. No alteration in alveolar-capillary barrier permeability was observed. A total of 12 and 14 proteins were differentially expressed between the groups (FDR < 0.1) in BALF and lung tissue homogenates, respectively. Of those, HGF, TGF-α, and CCL2 were identified as the most relevant to this study. Their protein expression patterns were verified by ELISA. This study confirmed that post-stroke lung damage was not associated with increased lung permeability or cerebral ischemia severity. Furthermore, the dysregulation of HGF, TGF-α, and CCL2 in BALF and lung tissue after ischemia could play an important role in the molecular mechanisms underlying stroke-induced lung damage.     

Microstructure and mechanical properties of ternary mortars with brick powder,glass powder,slag, fly ash,and limestone

The objective of this research is to study the effects produced by ternary binders which combine the addition of waste brick powder with fly ash, limestone, ground granulated blast furnace slag or waste glass powder in the microstructure and mechanical properties of mortars. In these ternary binders, the ordinary Portland cement was partially replaced by 10% of waste brick powder and 10% of another of the abovementioned additions. Mortars prepared with ordinary Portland cement without additions were also prepared. The microstructure was characterized with mercury intrusion porosimetry, electrical resistivity, and thermogravimetric analyses. Ultrasonic pulse velocity, compressive and flexural strengths were also determined. Mortars made using ternary binders with two active additions showed higher pore refinement and higher electrical resistivity at 250 days. Furthermore, their compressive strength and ultrasonic pulse velocity were relatively similar or even higher than that noted for reference specimens.     

Microparticles based on hydrophobically modified chitosan as drug carriers

In this work, a hydrophobically modified (HM) chitosan derivative was prepared by covalent linkage of C₁₂ groups to the chitosan backbone. HM‐chitosan microparticles were prepared according to an emulsification‐solvent evaporation method and naltrexone (NTX) was used as a model drug. For comparison, unmodified chitosan and poly lactic‐co‐glycolic acid (PLGA) microparticles were also tested as carriers for NTX. HM‐chitosan formed viscous semi‐dilute solutions, suggesting a high level of chain entanglements and hydrophobic associations. HM‐chitosan microparticles generally showed higher production yield and encapsulation efficiency, as compared with chitosan and PLGA. The burst release shown by chitosan microparticles was significantly reduced when using the HM‐chitosan derivative. An enhanced control of drug release was observed over at least 50 days. PLGA particles demonstrated inferior controlled release properties as compared to HM‐chitosan subsequent to the initial release stage. These results revealed the potential of hydrophobic modification of chitosan as a means to improve the stability and sustained delivery properties of the polymer. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40055.     

Influence of the processing parameters and composition on the thermal stability of PLA/nanoclay bio‐nanocomposites

Poly(lactic acid) (PLA) is one the most promising bio‐based and biodegradable polymer. However, its low thermal stability limits the range of applications and complicates its transformation via the most industrial common processes. The novelty of this work is studying the thermal stability of PLA and PLA/clay nanocomposites during use, as a function of the composition and using a wide range of extrusion and injection moulding processing parameters. To improve the thermal stability of the PLA, laminar silicates containing different organomodifications have been added (Cloisite 20A and Cloisite 30B). The results show that the processing conditions and composition define the morphology of the bio‐nanocomposites, which plays key role in defining final thermal properties of the material. In general, clays improve the thermal stability of the processed material, increasing the degradation temperature and decreasing the degradation rate under a wide range of processing conditions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40747.     

Short-Term Immune Responses of Gilthead Seabream (Sparus aurata) Juveniles against Photobacterium damselae subsp. piscicida

Photobacteriosis is a septicaemic bacterial disease affecting several marine species around the globe, resulting in significant economic losses. Although many studies have been performed related to the pathogen virulence and resistance factors, information regarding the host defence mechanisms activated once an infection takes place is still scarce. The present study was designed to understand innate immune responses of farmed juvenile gilthead seabream (Sparus aurata) after Photobacterium damselae subsp. piscicida (Phdp) infection. Therefore, two groups of seabream juveniles were intraperitoneally injected with 100 µL of PBS (placebo) or 100 µL of exponentially growing Phdp (1 × 10⁶ CFU/mL; infected). The blood, plasma, liver, and head kidney of six fish from each treatment were sampled immediately before infection and 3, 6, 9, 24 and 48 h after infection for the broad screening of fish immune and oxidative stress responses. Infected animals presented marked anaemia, neutrophilia and monocytosis, conditions that are correlated with an increased expression of genes related to inflammation and phagocytic activity. Similar studies with different fish species and bacteria can be useful for the definition of health biomarkers that might help fish farmers to prevent the occurrence of such diseases.     

Comparative performance of carbon nanotube and nanoclay on thermal properties and flammability behavior of amorphous polyamide/SEBS blend

Multiwall carbon nanotubes (CNT) or montmorillonite clay (MMT-30B) were added to a poly(hexamethylene isophthalamide-co-terephthalamine) (an amorphous polyamide - aPA) and styrene-ethylene/butylene-styrene graphitized with maleic anhydride (SEBS) blend, in different concentrations, in order to investigate the morphology, thermal properties and flammability behavior. Different nanoparticle localizations in the phase blend were observed through transmission electronic microscopy. CNT nanoparticles are localized in SEBS phase, and MMT-30B nanoparticles in aPA phase. No significant changes were observed on transition temperatures and thermal stability with both nanoparticle additions. However, a slight increase on storage modulus for clay nanocomposites and a slight reduction for carbon nanotube nanocomposites were observed, due to their different phase localizations. Regarding flammability, CNT nanocomposites showed better performance as a flame retardant when compared to samples with MMT-30B. Although the MMT-30B nanocomposites could not be classified according to the UL-94 criteria, no dripped flaming particles were observed, due to the a char barrier formation on the polymer surface. The CNT nanocomposites were classified according to the UL-94 criteria as V-2. The CNT's selective localization on the SEBS phase decreases its heat-release rate, but no interconnected network structure was formed in the matrix to suppress the dripping flaming particles.     

The effect of environmental conditions on nutritional quality of cherry tomato fruits: evaluation of two experimental Mediterranean greenhouses

BACKGROUND: The aim of this study was to examine how different environmental factors (temperature, solar radiation, and vapour‐pressure deficit [VPD]) influenced nutritional quality and flavour of cherry tomato fruits (Solanum lycopersicum L. cv. Naomi) grown in two types of experimental Mediterranean greenhouses: parral (low technology) and multispan (high technology). RESULTS: Fruits were sampled three times during 3 years (2004, 2005 and 2006): at the beginning, middle and end of the fruit production period. Values for temperature, solar radiation, and VPD peaked in the third sampling in both greenhouses; values were higher in the parral‐type greenhouse, triggering abiotic stress. This stress reduced the accumulation of lycopene and essential elements, augmenting the phytonutrient content and the antioxidant capacity of tomatoes. During the third sampling, sugars were increased while organic acid content diminished, producing tomatoes with a sweeter‐milder flavour. The parral greenhouse produced tomatoes with higher phenolic compounds and ascorbic acid contents, together with a greater antioxidant capacity, without showing differences in flavour parameters. CONCLUSION: The higher phytonutrients content and antioxidant activity during the environmental stress, more pronounced in parral than multispan greenhouse, together with the sweeter‐milder flavour, conferred a notable nutritional benefit, which considerably improved the nutritional and organoleptic quality of these tomatoes. Copyright © 2010 Society of Chemical Industry