Balancing User Priorities for Sustainability versus Security

In these times of global change, many facility emphases are competing for limited resources. Competing factors include, but are not limited to, sustainable design or green buildings; security, hardening or force protection; accessibility; historic preservation; aesthetics; and functionality. Yet, unlimited resources are seldom, if ever, available to fulfill all of these competing requirements in private or public construction. The Georgia Institute of Technology designed a decision matrix to allow owners and planners to balance these competing requirements on a project-by-project basis and to document the rationale.     

Extension of a combined analytical/numerical initial value problem solver for turbulent mixing with combustion

Here, we describe the development of a reacting flow multi-species/combustion methodology, implemented as an extension to the differential reduced ejector analysis (DREA) computer program [Mathematical and computer modeling, vol. 31, 2000, p. 21; Appl. Math. Model. 25 (2001) 427; Comput. Math. Appl. 43(10–11); NASA Contractor Report, 1998]. Use of the single fluid IVP solver framework that was developed for the original DREA model has been directly coupled into the combustion formulation. With these modifications, the analysis has an elementary single step reaction Fuel+Oxidizer→Product combustion capability. Though approximate in nature, the simplicity and efficiency of the DREA formulation make it suitable for its original niche, namely design and preliminary design environments where more complex and expensive models may be inappropriate.     

Photovoltaic characterization of amorphous hydrogenated and chlorinated silicon films

Hydrogenated and chlorinated silicon films were used to deposit Schottky barrier solar cells. Photovoltaic characterization, together with the results of electronic transport measurements, led to the conclusion that the presence of chlorine is detrimental to the properties of this kind of device.     

Microwave-Assisted Reaction Sintering of Bismuth Titanate-Based Ceramics

Bismuth titanate-based ceramics, pure and doped with 5 mol% WO₃, were prepared by reaction-sintering using a microwave oven. High densities, ≥96% of theoretical density were achieved with very short thermal treatments, with soaking time ranging from 5 to 15 min. Relatively small platelet-like grains were formed, and microstructure seemed not to be strongly affected by doping nor soaking time. Electrical measurements were performed and, as expected, a decrease of electrical conductivity was observed in WO₃-doped materials. The results of reaction-sintered samples, both conventional as well as microwave sintered, are compared with those of samples prepared with previously calcined powders and sintered using microwaves as well as a conventional electric furnace.     

Activity of two lignin biosynthesis enzymes during development of a maize internode

To ascertain the temporal relationships of phcnylpropanoid and lignin pathway enzymes, phenylalanine ammonia-lyase (PAL) and cinnamyl alcohol- NADPH dehydrogenase(CAD), with lignin concentration, PAL and CAD activities and lignin concentrations were assessed during progressive development of the 10th internode in maize (Zea mays L). Enzyme activities were quantified and lignin concentrations were determined by the detergent system of fiber fractiona- tion from lower, middle, and upper sections of the elongating internode harvested 3, 5, 7, 9, 11, 13, and 15 days after the internode had reached 10 mm in length. Over 15 days, a coordinated, sequential, and basipetal pattern of enzyme activities and lignin accumulation evolved through the internode, spanning the stages of rapid elongation, cellular differentiation, and secondary cell wall formation. PAL activity was initiated first, rising to peak activity in elongating tissue, and falling basipetally in tissues as they matured. CAD activity rose in fully elongated, maturing internode tissue where PAL activity was waning following its peak activity. Lignin accumulated in tissues with high CAD activity. CAD activity and lignin deposition patterns were similar: simultaneously increasing in activity and deposition over time while activity and deposition also shifting basipetally through the internode, keeping pace with secondary cell wall formation. Lignin concentration correlated significantly with CAD, but not with PAL.     

Thermal shock acoustic emission and microstructure of refractories I. High Alumina refractories (60–90% Al2O3)

Acoustic emission generated on thermal shocks makes it possible to investigate the processes of cracking that take place in high alumina refractories separately at heating and cooling stages, as well as on successive thermal shocks. It is dependent on the raw material type, technological process and the microstructure of products (i.e. number, size and shape of pores and cracks). The damage present after 20 thermal shocks in the material tested was illustrated by the microstructure examinations.     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008