Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB2

Compacts of TiB₂ with densities approaching 100% are difficult to obtain using pressureless sintering. The addition of SiC was very effective in improving the sinterability of TiB₂. The oxygen content of the raw TiB₂ powder used in this research was 1.5 wt%. X-ray photoelectron spectroscopy showed that the powder surface consisted mainly of TiO₂ and B₂O₃. Using vacuum sintering at 1700°C under 13–0.013 Pa, TiB₂ samples containing 2.5 wt% SiC achieved 96% of their theoretical density, and a density of 99% was achieved by HIPing. TEM observations revealed that SiC reacts to form an amorphous phase. TEM-EELS analysis indicated that the amorphous phase includes Si, O, and Ti, and X-ray diffraction showed the reaction to be TiO₂+ SiC → SiO₂+ TiC. Therefore, the improved sinterability of TiB₂ resulted from the SiO₂ liquid phase that was formed during sintering when the raw TiB₂ powder had 1.5 wt% oxygen.     

Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide

Silk sericin was impregnated into polyester fabric using supercritical carbon dioxide (SCCO₂) to overcome polyester hydrophobicity. The effects of sericin molecular weight, pH of sericin, solution and cosolvent types on sericin impregnation were investigated. Enzyme‐hydrolyzed, acid‐, based‐hydrolyzed sericin in SCCO₂, and a 30 kDa sericin in SCCO₂ modified with cosolvents such as water, methanol, 1‐propanol, and acetone; and a modifier: sodium hydroxide solution were used in this work. Impregnation of sericin in polyester was indicated by Fourier transform infrared spectrophotometry (FTIR) and dyeing with acid dye. Degradation of polyester fibers during SCCO₂ process was indicated by scanning electron microscopy (SEM). Methylene blue dyeing was used to realize carboxyl group in polyester. The results showed no impregnation of sericin into polyester by using SCCO₂ modified with cosolvents. However, sericin was impregnated into modified surface polyester since hydrophilic groups such as carboxyl and hydroxyl groups were regenerated by alkaline hydrolysis. Samples impregnated with hydrolyzed sericin showed high color strength of Supranolechtbordeaux B acid dye. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

The measurement of hydrogen activities in molten copper using an oxide protonic conductor

We have developed a hydrogen sensor for in situ measurements of hydrogen activities in molten copper. The sensor consists of a concentration cell utilizing a proton conductor, CaZr_0.9In_0.1O_3-δ, as the solid electrolyte. The electromotive force (emf) of the cell was generated by both hydrogen and oxygen activity gradients across the cell in a high-temperature region simulating the fire refining processes of copper. However, accurate hydrogen activity in molten copper could be evaluated from the emf if oxygen activity in molten copper was determined simultaneously by another concentration cell and if the hydrogen and the oxygen activities at the reference electrode were known. The performance of the sensor was studied under various conditions. The observed good response and reliability of the sensor show that it should be a powerful tool for improvement of the fire refining process of the molten copper. Theoretical treatment of the calculation of the emf of the concentration cells using a mixed ionic conductor, i.e., protonic and oxide ionic conductor, as solid electrolytes is also discussed briefly.     

Quantifying relationship between relative position error of localization algorithms and object identification

Positioning of things, devices and people is the fundamental technology in ubiquitous computing. However, few literature has discussed the impact of positioning errors due to localization algorithm properties such as ranging noise and deployment of anchors on people’s identification of objects. Since several factors such as relative distance, relative angles and grouping of objects are intricately related with each other in such identification, it is not an easy task to investigate its characteristics. In this paper, we propose criteria to assess the “accuracy” of the estimated positions in identifying the objects. The criteria are helpful to design, develop and evaluate localization algorithms that are used to tell people the location of objects. Augmented reality is a typical example that needs such localization algorithms. To model the criteria without ambiguity, we prove that the Delaunay triangulation well-captures natural human behavior of finding similarity between estimated and true positions. We have examined different localization algorithms to observe how the proposed model quantifies the properties of those algorithms. Subjective testing has also been conducted using questionnaires to justify our quantification sufficiently renders human intuition.     

Analysis of biphasic lubrication of articular cartilage loaded by cylindrical indenter

Combination of theoretical biphasic analyses and corresponding experimental measurements for articular cartilage has successfully revealed the fundamental material properties and time-depending mechanical behaviors of articular cartilage containing plenty of water. The insight of load partitioning between solid and fluid phases advanced the prediction of the frictional behavior of articular cartilage. One of the recent concerns about biphasic finite element (FE) analysis seems to be a dynamic and physiological condition in terms of mechanical functionality as a load-bearing for articular joint system beyond material testing, which has mainly focused on time-dependent reaction force and deformation in relatively small and low speed compression. Recently, the biphasic FE model for reciprocating sliding motion was applied to confirm the frictional effect on the migrating contact area. The results indicated that the model of a cylindrical indenter sliding over the cartilage surface remarkably sustained the higher proportion of fluid load support than a condition without migrating contact area, but the effectiveness of constitutive material properties has not been sufficiently evaluated for sliding motion. In our present study, at the first stage, the compressive response of the articular cartilage was examined by high precision testing machine. Material properties for the biphasic FE model, which included inhomogeneous apparent Young's modulus of solid phase along depth, strain-dependent permeability and collagen reinforcement in tensile strain, were estimated in cylindrical indentation tests by the curve fitting between the experimental time-dependent behavior and FE model simulation. Then, the biphasic lubrication mechanism of the articular cartilage including migrating contact area was simulated to elucidate functionality as a load-bearing material. The results showed that the compaction effect on permeability of solid phase was functional particularly in the condition without the migrating contact area, whereas in sliding condition the compaction effect did not clearly show its role in terms of the proportion of fluid load support. The reinforcement of solid phase, which represented the collagen network in the tissue, improved the proportion of fluid load support especially in the sliding condition. Thus, a functional integration of constitutive mechanical properties as a load-bearing was evaluated by FE model simulation in this study.     

Residual oil cracking combined with hydrogen production by steam-iron reaction

A new residual oil upgrading process has been developed. Residual oils were cracked over an iron oxide catalyst with simultaneous generation of hydrogen. The newly-developed iron oxide catalyst containing CaO and Cr₂O₃ was found to be a good catalyst for this process because it exhibited stable activity in the steam-iron reaction in the laboratory experiment and also in a large scale pilot plant. Effects of these foreign oxides on redox cycles were investigated. The catalyst was designed so as to maintain the stoichiometric balance between the reduction of magnetite and the oxidation of wustite by adding CaO and Cr₂O₃.     

Effect of conformational changes and differences of proteins on frictional properties of poly(vinyl alcohol) hydrogel

In this study, albumin or γ-globulin, both of which are included in natural synovial fluid, was used as an additive into lubricants to investigate the ability to reduce the friction for poly(vinyl alcohol) hydrogel in mixed lubrication. It was found from a measurement in circular dichroism that albumin contains a large amount of α-helix structure and γ-globulin contains a large amount of β-sheet structure. The lubricant containing only albumin showed low friction compared to the lubricant containing only γ-globulin. The effect of protein boundary film was clarified by changing lubricant. Albumin kept the friction low after changing from γ-globulin used at initial rubbing, but γ-globulin increased the friction after changing from albumin at initial rubbing. From a sliding distance of 600 m, albumin showed lower friction but γ-globulin showed higher friction. Therefore, in the case of friction decreasing, γ-globulin forms a tight adsorbed layer and subsequently albumin forms a layer with low shearing strength. Hence, it is important to apply the adsorption layer of γ-globulin at the bottom and make a layered structure composed of albumin and γ-globulin to reduce both friction and wear.     

Steady-State Characteristics of a Current-Source Inverter/Double-Wound Synchronous Machine System for AC Power Supply

A detailed steady-state analysis of a novel dc-to-ac conversion system used as an ac power source in dc electric railway coaches is presented. This system consists of a current-source inverter, a double-wound synchronous machine, a position sensor, and a control circuit. An equivalent circuit convenient for predicting the steady-state behavior of the system is first derived. Based on this equivalent circuit, the output voltage waveforms are then examined. It is shown that the voltage waveforms are nearly sinusoidal except that narrow spikes are superposed on them during commutation of the thyristors. As to armature reaction in the double-wound synchronous machine, it is shown that a remarkable direct reaction appears which affects the voltage regulation of the system. Finally, a method for keeping the output voltage and frequency constant is discussed.     

A dispatching method for automated guided vehicles by using a bidding concept

A dispatching method is suggested for automated guided vehicles by using an auction algorithm. The dispatching method in this study is different from traditional dispatching rules in that it looks into the future for an efficient assignment of delivery tasks to vehicles and also in that multiple tasks are matched with multiple vehicles. The dispatching method in this study is distributed in the sense that the dispatching decisions are made through communication among related vehicles and machines. The theoretical rationale behind the distributed dispatching method is also discussed. Through a simulation study, the performance of the method is compared with that of a popular dispatching rule. RID="*" ID="*" The research was financially supported by the Sasakawa Scientific Research Grant from The Japan Science Society. The original version of the simulation program is provided by Professor Jae Yeon Kim at Dong Yang University, Korea. Correspondence to: J. K. Lim