Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Rapid consolidation of powdered materials by induction hot pressing

A rapid hot press system in which the heat is supplied by RF induction to rapidly consolidate thermoelectric materials is described. Use of RF induction heating enables rapid heating and consolidation of powdered materials over a wide temperature range. Such rapid consolidation in nanomaterials is typically performed by spark plasma sintering (SPS) which can be much more expensive. Details of the system design, instrumentation, and performance using a thermoelectric material as an example are reported. The Seebeck coefficient, electrical resistivity, and thermal diffusivity of thermoelectric PbTe material pressed at an optimized temperature and time in this system are shown to agree with material consolidated under typical consolidation parameters.     

Scattering mechanism and reduction of insertion losses in a laminated polarization splitter

We experimentally found the unexpected phenomena of scattering in laminated polarization splitters (LPS's) composed of a-Si:H-SiO(2) multilayer and studied its mechanism. The scattering phenomena strongly depend on the incident angle and polarization of the incident light. To reduce the scattering loss in LPS's, a multilayer with flat layer boundaries is fabricated with rf bias sputtering. As a result, the insertion loss of the LPS is reduced to ~ 1 × 10(-3) dB/ μm, which is acceptable for practical uses.     

Theoretical analysis of the spatial phase-matching loci for second-harmonic generation and multiwave-mixing interactions

We report a theoretical analysis on spatial noncolinear phase matching of multiwave mixing and its application to a second-harmonic-generation (SHG) experiment. From the numeric calculations, the noncolinear phase-matching properties in general situations were determined. The theory gives the applicability for all noncolinear phase matching. Fine coincidences between theoretical calculations and observed spatial loci on noncollinear phase-matching SHG were confirmed. Relations that allow the calculation of the noncollinear phase-matching angle for any case of SHG are established. As an example, the noncolinear phase-matched SHG pattern on a screen is calculated numerically in the case of SHG of 1064 nm from a Nd:YAG laser under the phase-matched condition for two organic nonlinear crystals: 1-(2-thienyl)-3-(4-methyphenyl) propene-1 (TC-28), which is biaxial, and (2-furyl) methacrylic anhydride (FMA), which is uniaxial. Experimental results compared quite favorably with the theoretical analysis. Noncolinear phase matching may be of great practical interest in optical multiwave-mixing processes, such as optical parametric oscillation and optical parametric amplification. This technique also can be used for the measurement of crystal optical constants.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents

Recently, the development of efficient and environmentally benign solvents has received great attention to replace current harsh organic solvents. In this context, low-transition-temperature mixtures (LTTMs) have emerged as favorable green solvents for biomass delignification. Palm oil biomass, empty fruit bunch (EFB) was pretreated with commercial l-malic acid and microwave hydrothermally extracted cactus malic acid-derived LTTMs at 60, 80, and 100 °C. The LTTMs applied in this study were derived from malic acid–choline chloride–water and malic acid–monosodium glutamate–water with a molar ratio of 2:4:2 and 3:1:5, respectively. Three first-order reactions were used to express the delignification kinetic model of EFB. The first term was based on the initial stage and assigned as infinite due to the fast rate of delignification which could not be detected. The second and third terms were proportional to bulk and residual delignification stages. A good agreement was obtained between the kinetic model and the experimental data obtained in this study with R²?≥?0.91. The activation energies for the delignification reactions using l-malic acid and cactus malic acid-based LTTMs in the bulk and residual stages were approximated as 36–56 and 19–26 kJ/mol and 34–90 and 47–87 kJ/mol, respectively.     

Apolipoprotein A-I mutations and low high density lipoproteinemia

Urinary catecholamines (CAs) and their metabolites are usually measured during the process of diagnosing pheochromocytoma (pheo), but a 24-hour urine collection is not convenient for outpatients. Since 1987 we have utilized "spot" urine metanephrine (MN) and normetanephrine (NMN) assays for management of patients with pheo or adrenal incidentaloma. MN and NMN were measured by radioimmunoassay in 82 patients with surgically proved pheo and 15 patients with incidentaloma. In 10 patients with pheo, MN and NMN were measured with fractional every-3-hour urine samples, which were accumulated and then measured as a 24-hour urinary specimen. Fractions of 3-hour MN and NMN excretion were constant (MN 98.5 +/- 9.6%, NMN 97.6 +/- 10.8%; 24-hour MN and NMN 100%). The average levels of MN and NMN in patients with pheo were 6801 ng/mg creatinine (Cr) (range 93-88,248, median 1426) and 5627 ng/mg Cr (range 219-31,528, mean 3190), whereas the MN and NMN levels in patients with incidentaloma were 123 ng/mg Cr (range 36-246, mean 133) and 251 ng/mg Cr (range 84-472, mean 220), respectively. When we selected a cutoff value for MN + NMN of 1000 ng/mg Cr, the sensitivity was 97.6% and the specificity 100% for diagnosing pheo. When the standard was set as > 500 ng/mg Cr for either MN or NMN, both the sensitivity and specificity were 100%. The assay for MN and NMN is simple and effective, not only for screening but for diagnosing pheo and managing incidentaloma.     

Single-mode optical waveguides fabricated from fluorinated polyimides

Buried channel optical waveguides were fabricated from fluorinated polyimides. They operated in single mode and showed an optical loss of less than 0.3 and 0.7 dB/cm for TE and TM polarizations, respectively, at a wavelength of 1.3 mum. Moreover, these waveguides had high heat and moisture resistance; the optical loss did not significantly change after heating at 380 degrees C for 1 h or after exposure to 85% relative humidity at 85 degrees C for over 200 h.     

Automated 360° profilometry of a three-dimensional diffuse object and its reconstruction by use of the shading model

The 360° profilometry of a three-dimensional (3-D) diffuse object by use of the light intersection and its image reconstruction by surface shading are presented. The lack of data in one direction, which was due to occlusion, was compensated by the projection of two lines of light from different directions. Some experiments to profile objects and their reconstruction by computer are shown. The entire surface model was constructed, and a real shading image was obtained by means of computer graphics.