Effect of overhead ground wires on reduction of failure rates of surge arresters on power distribution lines

Surge arresters are sometimes damaged by lightning strokes with high energy, in spite of installation of conventional protection methods. In order to reduce the number of failures of surge arresters, we should consider another protection method, such as an increase in the withstand capability of surge arresters and installation of additional overhead ground wires. However, quantitative comparison of these methods for preventing damage to surge arresters against lightning strokes with high energy has never been performed. This paper describes the effects of additional overhead ground wires for preventing damage to surge arresters. The main results are: (1) The failure rate of surge arresters on a distribution line with two overhead ground wires is about one third of that with an overhead ground wire. (2) Installation of a second overhead ground wire six to eight spans from the end of a line reduces the failure rate of a surge arrester at the end as effectively as increasing the withstand capability by a factor of two. © 1998 Scripta Technica. Electr Eng Jpn, 122(2): 12–20, 1998     

Homolog of a-factor receptor gene in Saccharomyces exiguus

Homologs of Saccharomyces cerevisiae STE3, a -factor receptor gene were detected from S. exiguus NFRI 3539 by low stringency Southern hybridization. This strain might have at least two types of homolog. One of these homologs, designated as e-STE3 was cloned. Its nucleotide sequence revealed 60% identity to STE3. The putative protein coding region consisted of 453 amino acid residues. The amino acid sequence identity between STE3 and e-STE3 was 62%, and that of the N-terminal 303 amino acid residues considered to be the pheromone binding domain was 79%. The e-STE3 sequence submitted to the DDBJ/EMBL/GenBank data libraries is available under Accession Number AB003086. © 1998 John Wiley & Sons, Ltd.     

Estimation of beta-ray skin dose from exposure to fission fallout from the Hiroshima atomic bomb

Beta-ray skin dose due to the fission fallout from the Hiroshima atomic bomb is potentially related to the epilation in the black rain area. The absorbed dose to the skin from beta-rays emitted by fission fallout has been estimated for an initial 13?Cs deposition of 1 kBq m?2 on the ground at 0.5 h after the explosion. The estimated skin dose takes into account both external exposure from fission fallout radionuclides uniformly distributed in 1 mm of soil on the surface of the ground and from a 26 μm thickness of contaminated soil on the skin, using the Monte Carlo radiation transport code MCNP-4C. The cumulative skin dose for 1 month after the explosion is taken as the representative value. The estimated skin dose for an initial 13?Cs deposition of 1 kBq m?2 was determined to be about 500 mSv.     

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

High-cycle fatigue features of over 10⁸ cycles, particularly the initiation and propagation of edge delamination considering the effects of transverse cracks, were investigated using quasi-isotropic carbon-fiber-reinforced plastic (CFRP) laminates with a stacking sequence of [45/0/−45/90]_s in this study. In the relationship between a transverse crack density and initiation and growth of edge delamination, it was found that fatigue damage growth behavior varied depending on applied stress. It was observed that edge delamination initiated and grew at parts where transverse cracks were dense at ordinary applied stress, whereas it was observed that edge delamination grew before or simultaneously with transverse crack propagation at a low applied stress and high-cycle loading. In addition, the critical transverse crack density where delamination begins growing was calculated to evaluate the interaction between transverse crack and edge delamination growth.     

Evaluation of corrosion behaviors for reactor pressure vessels/primary containment vessels in Fukushima Daiichi units 1–3 nuclear power plant

Fukushima Daiichi nuclear power plants (1F) were damaged by unprecedented severe accident in the Great East Japan Earthquake on 11 March 2011, and seawater has been injected as an emergency countermeasure for the core cooling. Although, the RPV and PCV were not supposed to be exposed to diluted seawater, they have been exposed to diluted seawater environment or high-moisture environment. Therefore, seawater corrosion has become an important issue. Immersion corrosion tests were performed for low-alloy steel of RPV material and carbon steel of PCV material in 1F cooling-water-simulated environment. As a result, the mass loss by corrosion was reduced with the decreasing temperature and chloride ion concentration. Moreover, the effects of nitrogen deaeration and Na₂WO₄ addition on corrosion protection were remarkable among the selected corrosion countermeasures. In addition, the integrity assessments of RPV and PCV were performed considering the reduction of plate thickness based on corrosion test data and the load condition based on earthquake response analysis results. It had been confirmed that primary stresses for RPV and PCV equipment satisfied with the allowable values until at least 15 years after the accident.     

Development of HVAC system simulation tool for life cycle energy management Part 1: Concept of life cycle energy management and outline of the developed simulation tool

The importance of LCEM (life cycle energy management) has been recognized from the view of life cycle energy savings for sustainable buildings. The purposes of this research are the proposal of an LCEM framework and development of prototype HVAC system simulation tools for LCEM. In this paper, the necessity of energy simulation tools for LCEM is discussed, and the outline and solution method of the simulation tool are shown.     

Quantitative bioimaging analysis of gonads in olvas-GFP/ST-II YI Medaka (transgenic Oryzias latipes) exposed to ethinylestradiol

This study investigates the adverse and persistent effects of ethinylestradiol (EE2) on mature gonads of transgenic olvas-GFPIST II-YI medaka (Oryzias latipes). The measurement of gonadal size calculating the GFP-fluorescent area was used as a technique that enabled monitoring gonads in living specimens by GFP fluorescence. First, mature medaka were exposed to EE2 (47.8-522 ng/L) for 4 weeks. The gonads showed a significant reduction of the GFP-fluorescent area and Gonadosomatic Index in males exposed to EE2 at >216 ng/L and females exposed at 522 ng/L. Histologically, males at all treatments exhibited testis-ova and additionally, high connective tissue prevalence at > or =216 ng/L. Next, mature male medaka were exposed to EE2 (43.7-473 ng/L) for 3 weeks and allowed to depurate for 6 weeks, to investigate persistent effects of EE2. Continuous gonad observation showed that GFP began to decline 3 weeks after initial exposure to > or =215 ng/L. After depuration, the gonad's fluorescent areas gradually recovered, with no statistical difference at the end of the depuration period; normal spermatogenesis was present in these individuals. Alterations in GFP fluorescence clearly indicate the condition of the gonad in transgenic medaka and this strain showed a facilitated screening fish model to detect the adverse effects on the gonad by estrogenic chemicals.     

Inactivation of Surface-Borne Microorganisms and Increased Germination of Seed Specimen by Cold Atmospheric Plasma

Sustaining the quality of seeds is a major task in attempting to supply nutrition to the growing world population. In this study, the seeds of Cicer arietinum were exposed to cold atmospheric plasma (CAP). A significant reduction of the natural microbiota attached to the seed surface was observed for increasing CAP treatment times—2 and 5 min were sufficient to achieve a 1 and 2 log reductions, respectively. Furthermore a 1 min CAP treatment showed a strongly improved seed germination (89.2 %), speed of germination (7.1?±?0.1 seeds/day), and increased seed vigor, beside a decrease in the mean germination time (2.7 days) compared with controls. The roughness profile of the seed cotyledon was altered significantly, only in case of longer treatment times from 5 min. These results suggest that CAP technology has the potentiality to reduce health risks associated with contaminated seeds, while improving food quality.     

Abrasive wear resistance of spheroidal vanadium carbide cast irons

The effect of the chemical composition and heat treatment on the microstructure and abrasive wear resistance of V-Mn, V-Ni-Cr, and V-Mo spheroidal vanadium carbide cast irons (18–23 vol %) has been studied. The wear resistance has been determined under conditions of wear by abrasives with various hardnesses, i.e., corundum and quartz and compared to that of high-chromium cast iron with 13% Cr. It has been found that the advisability of using high-vanadium cast irons is governed by the hardness of the abrasive. When a hard abrasive, i.e., corundum was used, V-Mo cast iron with the maximum concentration of spheroidal VC carbides, which were uniformly distributed in the martensitic matrix, had the highest wear resistance. When a soft abrasive, i.e., quartz, was applied, high-chromium cast iron with a hardness of 68 HRC, which contained the largest amount of M₇C₃ carbides, was more wear-resistant. In the course of isothermal exposure at 300–1000°C, V-Ni-Cr and V-Mo cast irons with an austenitic structure had high resistance to phase and structural transformations. However, the properties and microstructure of V-Mo cast irons with a martensitic matrix depended strongly on the temperature of exposure during heat treatment.