Rearrangements of sp/sp hybridized bonding with phosphorus incorporation in pulsed laser deposited semiconducting carbon films by X-ray photoelectron spectroscopic analysis

The carbon films were grown on p-type silicon substrate at room temperature by pulsed (XeCl) laser deposition technique using camphoric carbon target containing 1%, 3%, 5% and 7% of phosphorus (P) by mass. The analysis of X-ray photoelectron spectroscopy spectra of the C1s region in these films shows the presence of sp² and sp³ hybridized carbon and a sp² satellite peak due to π–π shake up. The sp² content is seen to remain almost constant with P content. The FWHM of the sp² peak increases up to 5% P but decreases for 7% P probably due to clustering of sp² chains and this clustering in the sp² phase probably decreases the band gap for the 7% P film. With P incorporation, the tetrahedral bonding configurations of the carbon network do not change appreciably, therefore, suggesting the scope of phosphorus as a potential dopant in carbon films.     

High-temperature sulfidation of Fe-Mn alloys

The complete range of binary Fe-Mn alloys were sulfidized in pure sulfur vapor (1 atm) at 700–1000°C. It was found that the corrosion kinetics could be divided into four groups, depending upon the alloy concentration. The first group, up to 11 w/o Mn, had a constant corrosion rate. The second group, up to about 63 w/o Mn, had an exponentially decreasing rate of corrosion with increasing manganese content. In the third group, about 63–80 w/o Mn alloys, the corrosion rate did not follow the parabolic law. The corrosion rates became constant above 80 w/o Mn. These corrosion kinetics were explained by considering the scale structure and alloy substrate.     

Optical properties of high-quality CuGaSe2 epitaxial layers examined by piezoelectric photoacoustic spectroscopy

The piezoelectric photoacoustic (PPA) signals for Cu-rich CuGaSe₂ (CGS) /GaAs (0 0 1) epitaxial layer (Cu/Ga=1.09–2.16) grown by molecular beam epitaxy (MBE) were successfully obtained at liquid-nitrogen temperature. The bandgap energies of CGS (A-band) decreased and GaAs was not almost changed with increasing the Cu/Ga ratios. This phenomenon was very similar to that of free exciton (FE) by photoluminescence (PL) and the lattice parameter c by X-ray diffraction (XRD) measurements.     

Heat transfer performance of cryogenic oscillating heat pipes for effective cooling of superconducting magnets

The cryogenic oscillating heat pipe (OHP) for conduction cooling of superconducting magnets was developed and the function was demonstrated successfully. OHP is a highly-efficient heat transfer device using oscillating flow of two-phase mixture. The working fluids that are employed in the present research are Nitrogen, Neon and Hydrogen, and the operating temperatures are 67–91 K, 26–34 K and 17–27 K, respectively. The estimated effective thermal conductivities from the measurement data of the OHP were higher than one of the solids such as copper at low temperature. These results revealed that the cryogenic OHP can enhance the performance of cooling system for magnets.     

Effects of storage on flow and heat transfer characteristics of ice slurry

The effect of storage on flow and heat transfer characteristics of ice slurry was investigated experimentally. After ice slurry had been stored in the storage tank, variations in ice particle size were measured using a microscope, and diameter distribution and average diameter determined. The ice packing factor, Reynolds number and storage time were varied as experimental parameters. The pressure drop and heat transfer coefficient were measured when the ice slurry flowed in the horizontal tube. For laminar flow, the ratios of pipe friction and heat transfer coefficient decreased with storage time. For more than 12 h storage time, the ice slurry could not flow in the tube. The adhesion between ice particles seemed to cause a blockage in the tube. On the other hand, for turbulent flow, the pipe friction and ice slurry heat transfer coefficients were similar to that of the ethanol solution, and the storage effect was insignificant.     

Graphene synthesis by thermal chemical vapor deposition using solid precursor

We report single layer to few layer graphene on polycrystalline nickel by chemical vapor deposition at ambient pressure using solid precursor, camphor. Investigating at a wide range of temperature, it was observed that 870 °C is better for the deposition of single layer graphene on nickel substrate. The percentage of single layer on the substrate reduced significantly with decreasing the deposition temperature. The full width half maximum of the synthesized single layer graphene was 21 cm^?1 and Raman intensity ratio of 2D to G peak was almost nine. The film was transferred to insulating substrate and measured transmittance was 85 %. Raman spectroscopy, Raman mapping, SEM and UV–visible spectrometer measurement were performed for characterization.     

一种制备优质有机光学薄膜的新方法

提出了一种用真空蒸发和真空热压相结合的技术来制备优质有机光学薄膜的方法。用它制成的有机光学薄膜中没有任何残留有机溶剂,在放置过程中也不产生晶化,因而不会对光发生散射。在光通讯器件、有机发光、有机光存储器的制作等方面有广泛的应用前景。     

Nanocellulose as a natural source for groundbreaking applications in materials science: Today’s state

Nanocelluloses are natural materials with at least one dimension in the nano-scale. They combine important cellulose properties with the features of nanomaterials and open new horizons for materials science and its applications. The field of nanocellulose materials is subdivided into three domains: biotechnologically produced bacterial nanocellulose hydrogels, mechanically delaminated cellulose nanofibers, and hydrolytically extracted cellulose nanocrystals. This review article describes today’s state regarding the production, structural details, physicochemical properties, and innovative applications of these nanocelluloses. Promising technical applications including gels/foams, thickeners/stabilizers as well as reinforcing agents have been proposed and research from last five years indicates new potential for groundbreaking innovations in the areas of cosmetic products, wound dressings, drug carriers, medical implants, tissue engineering, food and composites. The current state of worldwide commercialization and the challenge of reducing nanocellulose production costs are also discussed.     

Structural study of amorphous In2O3 film by grazing incidence X-ray scattering (GIXS) with synchrotron radiation

Grazing incidence X-ray scattering (GIXS) using synchrotron radiation is a very useful method for structural analysis of amorphous films. We investigated the structure of amorphous In₂O₃ film utilizing GIXS at BL19B2 in SPring-8. Radial distribution function (RDF) was obtained from the measurement data. Structural models were constructed by molecular dynamics (MD) and reverse Monte-Carlo (RMC) simulations, and the calculated RDFs from the simulations were compared with that observed. It was found that the average oxygen coordination number around In ions was almost 6 and the average length 2.12 Å, which was smaller by about 3% than that of 2.18 Å in crystalline In₂O₃. It was concluded that the atomic arrangement of the amorphous In₂O₃ was characterized by the increase in the number and the boarder angle of distribution of corner-sharing In-O-In bond compared with crystalline In₂O₃.