Synthesis of Pd-Sn nanoparticles by ultrasonic irradiation and their electrocatalytic activity for oxygen reduction

Nanoparticles of Pd-Sn were prepared under various conditions by applying ultrasonic irradiation, and their electrocatalytic activity for oxygen reduction was evaluated in 0.5 M KOH. The average size of Pd-Sn nanoparticles thus prepared was about 3-5 nm. The Pd in Pd-Sn nanoparticles was found to be mostly in the metallic state. The electrocatalytic activity of the Pd-Sn nanoparticles for the oxygen reduction reaction (ORR) is greater than Pt or Pd nanoparticles in alkaline media. The molar ratio of Pd to Sn metal ions in the synthesizing solution, their initial concentrations, the concentration of ethanol, which increases primary hydrogen radicals during sonolysis, and the concentration of citric acid were found to affect the size distribution of the Pd-Sn nanoparticles, and therefore, those factors controlled the electrocatalytic activity for ORR. Particularly, the concentration of citric acid was found to be important for controlling the surface property on Pd-Sn particles to adjust the electrocatalytic activity for ORR.     

Tachykinins and tachykinin receptors in bone

Adrenomedullin (AM) was originally characterized in extracts of an adrenal medullary tumor. Since this original finding the peptide and its mRNA have also been found in the adrenal cortex, specifically, in the cells of the aldosterone-secreting zona glomerulosa. It is clear that the synthesis of AM is actively regulated in both cortex and medulla. Much research effort has been focused on identifying a role for AM in the adrenal gland. To date, no consistent effect on medullary catecholamine biosynthesis has been demonstrated. In the cortex the actions of AM are controversial and appear to depend on both the tissue preparation used and on the specific receptor population expressed in the individual gland. The results of further studies on the long-term actions of AM on adrenal growth and differentiation are awaited with interest.     

Development of service-oriented products based on the inverse manufacturing concept

To achieve sustainability, resource consumption and waste generation must be drastically decreased. For societal acceptance, preservation of both quality of life and corporate profits are essential. One promising approach is to shift the source of value from the amount of product sold to the quality of services the product provides. This paper describes the need for redesigning recycling systems from a manufacturing perspective and then discusses the possibility of this "servicification" of products, describing our experience with prototype development. We discuss development of product prototypes and their business, using consumer facsimile machines as an example of "service-oriented products". Traditional thought presumes that only products comprising new materials and components are valuable. Consideration of a service-oriented product can serve as a stimulus to revise this mode of thought and to control delivery and quality of disposed products. This paper also provides a life cycle simulation of the developed service-oriented business. Simulation results indicate that service-oriented business can potentially reduce environmental impact while extending business opportunities from the viewpoint of whole product life cycles.     

All-optical wavelength conversion in a GaInAsP/InP optical gate loaded with a Bragg reflector

All-optical wavelength conversion employing a GaInAsP/InP nonlinear distributed-feedback waveguide switch is investigated. The device has the advantages of simple structure, compactness, polarity-noninverted operation, and feasibility of integration with other photonic devices such as semiconductor optical amplifier and modulators. We show that the device exhibits constant conversion efficiency around -9.2 dB in a signal-wavelength range of 1530-1560 nm. Furthermore, this device can potentially be made polarization independent.     

Three-Dimensional Numerical Simulation of Helically Propagating Combustion Waves

In the present paper, by using a mathematical model for self-propagating high-temperature synthesis, we reveal the three-dimensional structure of so-called spin combustion wave on the inside of cylindrical sample. It is shown that an isothermal surface of regular spin combustion wave has some wings of which number is the same as that of reaction spots on the cylindrical surface and that the isothermal surface with helical wings rotates down with time. Because of this propagating pattern, in this paper, we adopt the more suitable term helical wave. We also obtain the following existence conditions of a helical wave: If physical parameters are set so that a pulsating wave exists stably for the one-dimensional problem, then a helical wave takes the place of a pulsating wave when the radius of cylindrical sample becomes large.     

Informative patches sampling for image classification by utilizing bottom-up and top-down information

In image classification based on bag of visual words framework, image patches used for creating image representations affect the classification performance significantly. However, currently, patches are sampled mainly based on processing low-level image information or just extracted regularly or randomly. These methods are not effective, because patches extracted through these approaches are not necessarily discriminative for image categorization. In this paper, we propose to utilize both bottom-up information through processing low-level image information and top-down information through exploring statistical properties of training image grids to extract image patches. In the proposed work, an input image is divided into regular grids, each of which is evaluated based on its bottom-up information and/or top-down information. Subsequently, every grid is assigned a saliency value based on its evaluation result, so that a saliency map can be created for the image. Finally, patch sampling from the input image is performed on the basis of the obtained saliency map. Furthermore, we propose a method to fuse these two kinds of information. The proposed methods are evaluated on both object categories and scene categories. Experiment results demonstrate their effectiveness.     

Sinterability and properties of Ti(N1−x,O x ) y -(V,Ta)C-Ni sintered alloys having a golden colour

The effect of oxygen and carbide addition on the sinterability of TiN _y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni₃Ti and Ti₂O₃ phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.     

Active sites of Cu-ZSM-5 for the decomposition of acrylonitrile

The catalytic decomposition of acrylonitrile (AN) over Cu-ZSM-5 prepared with various Cu loadings was investigated. AN conversion, during which the nitrogen atoms in AN were mainly converted to N₂, increased as Cu loading increased. N₂ selectivities as high as 90–95% were attained. X-ray diffraction measurements (XRD) and temperature-programmed reduction by H₂ (H₂-TPR) showed the existence of bulk CuO in Cu-ZSM-5 with a Cu loading of 6.4 wt% and the existence of highly dispersed CuO in Cu-ZSM-5 with a Cu loading of 3.3 wt%. Electron spin resonance measurements revealed that Cu-ZSM-5 contains three forms of isolated Cu²⁺ ions (square-planar, square-pyramidal, and distorted square-pyramidal). The H₂-TPR results suggested that in Cu-ZSM-5 with a Cu loading of 2.9 wt% and below, Cu⁺ existed even after oxidizing pretreatment. The activity of AN decomposition over Cu/SiO₂ suggested that CuO could form N₂, but, independent of the CuO dispersion, nitrogen oxides (NO_x) were formed above 350 °C. Cu⁺ and the square-pyramidal and distorted square-pyramidal forms of Cu²⁺ showed low activity for AN decomposition. Temperature-programmed desorption of NH₃ suggested that N₂ formation from NH₃ proceeded on Cu²⁺, resulting in the formation of Cu⁺. The Cu⁺ ions were oxidized to Cu²⁺ at around 300 °C. Thus, high N₂ selectivity over Cu-ZSM-5 with a wide range of temperature was probably attained by the reaction over the square-planar Cu²⁺, which can be reversibly reduced and oxidized.     

Gelation of poly(vinyl alcohol) solutions at low temperatures (20 to −78°C) and properties of gels

The flow points of atactic poly(vinyl alcohol) (a-PVA) gels with H₂O/dimethyl sulfoxide (DMSO) = 90/10 (v/v) chilled at 20 to ?78°C for 24 h depended on the chilling temperature and were 0–30°C for gels with the initial polymer concentrations (C_i) of 2–5 g/dL, whereas those for H₂O/DMSO = 50/50 chilled at 0 to ?78°C were independent of the chilling temperature and were 70–75°C. Syneresis occurred after eight cycles of freezing (?24°C) and thawing (20°C) for a-PVA hydrogels at concentrations above C_i = 4 g/dL and two such cycles for syndiotacticity-rich PVA (s-PVA) hydrogels at concentrations above C_i = 1 g/dL. The extent of syneresis per one cycle for s-PVA hydrogels was higher than that for a-PVA hydrogels at the initial cycles. In the a-PVA hydrogels with an initial polymer concentration of ca. 30 g/dL, syneresis was expected not to occur even after 20 cycles. If all the free water in the gels is assumed to have transuded by syneresis after 20 cycles, the residual water is bound water and is estimated to be six water molecules per one vinyl alcohol monomer unit. © 1994 John Wiley & Sons, Inc.