Analysis of essential amino acid residues for catalytic activity of glutaminase from Micrococcus luteus K-3

Structural-based mutational analysis of salt-tolerant glutaminase from Micrococcus luteus K-3 (Micrococcus glutaminase) revealed that three amino acid residues, S64, K67, and E160, were essential to a catalytic reaction. The result suggested that Micrococcus glutaminase had a possible catalytic mechanism similar to class A beta-lactamase rather than glutaminase-asparaginase from Pseudomonas 7A.     

Structural and morphological changes of monolayers of a block copolymer with dendron and perfluoroalkyl side chains by mixing a perfluorooctadecanoic acid

Hybrid Langmuir and Langmuir-Blodgett monolayers of a perfluorooctadecanoic acid mixed with a rigid block copolymer, poly(3,5-bis(3,5-bis(benzyloxy)benzyloxy)benzyl methacrylate-randommethacrylic acid)-block-poly(2-perfluorooctylethyl acrylate), which is composed of benzyloxy dendron side chains and perfluorinated side chains, were prepared and characterized by surface pressure-surface area isotherms, atomic force microscopic images and neutron and X-ray reflectometries. The two-dimensionally phase-separated structures of monolayer films and their morphologies with plateau and terrace were confirmed. The monolayers were separated into a dendron layer, a perfluorinated layer, and a carboxyl layer. The layer formation is originated not only in the intermolecular interaction between a perfluorooctadecanoic acid and a block copolymer but also in the geometry of the molecules. Especially, the amphiphilicity of perfluorinated surfactant plays a role to the ordered array of the block copolymers.     

Quantum dot as a drug tracer in vivo

Quantum dots (QDs) have been applied to a wide range of biological studies by taking advantage of their fluorescence properties. There is almost no method to trace small molecules including medicine. Here, we used QDs for fluorescent tracers for medicine and analyzed their kinetics and dynamics. We conjugated QDs with captopril, anti-hypertensive medicine, by an exchange reaction while retaining the medicinal properties. We investigated the medicinal effect of QD-conjugated captopril (QD-cap) in vitro and in vivo. We also evaluated the concentration and the distribution of the QD-cap in the blood and the organs with their fluorescence. We demonstrate that the QD-cap inhibits the activity of ACE in vitro. The QD-cap reduced the blood pressure of hypertensive model rats. The concentration of the QD-cap in the blood was measured by using the standard curve of the fluorescence intensity. The blood concentration of the QD-cap decrease exponentially and QD-cap has approximately the same half-life as that of captopril. In addition, the fluorescence of the QDs revealed that QD-cap accumulates in the liver, lungs, and spleen. We succeeded in analyzing the dynamics and kinetics of small molecules using fluorescence of QDs     

Use of electrolyzed water ice for preserving freshness of pacific saury (Cololabis saira)

The effects of electrolyzed water ice (EW-ice), compared with traditional tap water ice (TW-ice), on the microbiological, chemical, and sensory quality of Pacific saury (Cololabis saira) stored for a period of up to 30 days at 4 degrees C were evaluated. EW-ice with active chlorine at a concentration of 34 mg/kg was prepared from weak acidic electrolyzed water, whose pH, oxidation-reduction potential, and chlorine content were 5, 866 mV, and 47 mg/liter, respectively. Microbiological analysis showed that EW-ice, compared with TW-ice, markedly inhibited the growth of both aerobic and psychrotrophic bacteria in saury flesh during refrigerated storage, primarily because of the action of active chlorine. Chemical analysis revealed that EW-ice retarded the formation of volatile basic nitrogen and thiobarbituric acid-reactive substances and reduced the accumulation of alkaline compounds in the fish flesh in comparison with TW-ice. Sensory analysis confirmed that the freshness of saury was better preserved in EW-ice than in TW-ice and showed that the saury stored in EW-ice had a shelf life that was about 4 to 5 days longer than the fish stored in TW-ice.     

Micronization and polymorphic conversion of tolbutamide and barbital by rapid expansion of supercritical solutions

Rapid expansion of supercritical solutions (RESS) was applied to tolbutamide and barbital. The solubility in supercritical CO₂ was determined to estimate the extraction efficiency roughly by a simple method and accurately by a direct spectrophotometric technique. The latter revealed that the solubility of tolbutamide was a function of applied pressure and temperature and was proportional to the pressure. No significant difference in solubility between polymorphic Forms I and II of tolbutamide was detected. Tolbutamide and barbital particles produced by the RESS were characterized by size distribution measurement, polymorph identification and morphological evaluation. Significant size reduction to micron or sub-micron level with narrow size distribution was achieved, while conventional mechanical grinding had only slight effect. The particle size was greatly affected by both extraction and expansion conditions. The lower the extraction temperature was, the smaller was the mean particle size. Higher extraction pressure resulted in smaller mean particle size when compared at the same extraction temperature. The mean particle size was reduced by lowering the spray nozzle temperature, by lowering the expansion chamber temperature, by increasing the CO₂ amount per spray, and by increasing the exhaust gas flow rate. The RESS processing realized the polymorphic conversion as well. As for tolbutamide, three polymorphs (Forms I, II, and IV) out of four could be produced by changing the extraction conditions, and in the case of barbital, one polymorph (Form II) out of three was produced consistently.     

Spectral restoration and energy resolution improvement of electron energy-loss spectra by Pixon reconstruction: II. Application to practical ELNES analysis of low SNR

We applied Pixon deconvolution as introduced in Part I to several practical, examples of low signal-to-noise ratio (SNR), electron energy-loss spectra with a goal toward restoring their fine spectral features and/or improving the energy resolution. We demonstrate that by directly fitting the two-dimensional spectral data recorded on the CCD; the method enables us to reveal fine spectral structures. Consequently, Pixon reconstruction extends the ability to probe electronic states in very spatially localized areas, a capability currently unique to our method.     

Cross-section analysis of electric devices by scanning capacitance microscope

Carrier influence of semiconductor devices is important as it affects the function of the device. In this experiment, the carrier density distribution in the cross-section of semiconductor device was analyzed by SCM: Scanning Capacitance Microscope which is one of the measuring mode of SPM: Scanning Probe Microscope.This paper describe measurement result of change in carrier density by the gate voltage at p channel area of CMOS device and its efficiency to investigating dopant profile on 16MDRAM cross-section.     

Titanium Sheet Fabricated from Powder for Industrial Applications

In collaboration with Ametek and Commonwealth Scientific and Industrial Research Organization (CSIRO), Oak Ridge National Laboratory has evaluated three different methods for converting titanium hydride?Cdehydride (HDH) powder into a thin-gauge titanium sheet from a roll-compacted preform. Methodologies include sintering, followed by cold rolling and annealing; direct hot rolling of the roll-compacted sheet; and hot rolling of multiple layers of roll-compacted sheet that are encapsulated in a steel can. Fabrication of fully consolidated sheet has been demonstrated using all three methods, and each processing route has the ability to produce a sheet that meets ASTM B265 specifications. However, not every method currently provides a sheet that can be highly formed without tearing. The degree of sintering between powder particles, postprocessing density, and the particle-to-particle boundary layer where compositional variations may exist have a significant effect on the ability to form the sheet into useful components. Uniaxial tensile test results, compositional analysis, bend testing, and biaxial testing of the titanium sheet produced from hydride?Cdehydride powder will be discussed. Multiple methods of fabrication and the resulting properties can then be assessed to determine the most effective and economical means of making components for industrial applications.     

Mechanical Behavior of Shape Memory Alloys Under Complex Loading Conditions of Stress, Strain, and Temperature

The transformation behavior of shape memory alloys is simulated for complex loadings of stress, strain, and temperature. Calculations are made by using the ??Accommodation Model?? which is a constitutive model for shape memory alloys considering the accommodation behavior of the transformation strain. Calculated results are given for the superelastic behavior, the shape memory effect, the transformation behavior under temperature change with stress or strain holding, the structural behavior of a shape memory wire with a bias spring, etc. The effect of the plastic strain on the transformation strain is also investigated.     

Pricing electricity from residential photovoltaic systems: A comparison of feed-in tariffs,net metering,and net purchase and sale

Three mechanisms are commonly employed to enable households to sell electricity from grid-connected residential solar photovoltaic (PV) systems to utilities or grid companies: feed-in tariffs (FIT), net metering, and net purchase and sale. This study aims to compare these mechanisms with respect to social welfare and to retail electricity rates that include the cost to electric utilities of purchasing residential PV-generated electricity. The study presents a simple microeconomic model that shows, first, that the mechanism that produces the most social welfare is different depending on the amount of reduction in electricity consumption achievable under net metering or net purchase and sale (which are shown to be essentially similar). If the reduction is relatively small, FIT is likely to produce more social welfare than net metering/net purchase and sale; if the reduction is large, the opposite is the case. Second, the model shows that the mechanism that yields the lowest electricity rate is not definite, and differs depending on the homogeneity of households: when households are more homogeneous, the electricity rate under net metering/net purchase and sale is more likely to be higher than that under FIT.