聚丙烯结构壁管专用料的开发

阐述了塑料结构壁管的基本情况和国内外现状．重点就扬子石油化工股份有限公司研究院研制的聚丙烯结构壁管专用料的情况进行了介绍。     

Study on early warning index of spatial deformation for high concrete dam

Owing to the deficiency in early warning for high concrete dam,a formula was established to characterize the deformation behavior of high concrete dam as a whole.The early warning index of spatial deformation was calculated by low probability principle on the basis of the deformation entropy formula proposed.The steps were as follows.Firstly,the probability method was utilized to define the degree of order and degree of chaos for each survey point.Secondly,the weight distribution among the survey points was...     

仿瓷胶粘剂的研究

本文介绍一种仿瓷环氧胶粘剂,该胶耐酸耐碱,可室温固化,在室温下粘接不锈钢试样,其剪切强度可达30.7MPa;而在130℃时其剪切强度为1.7MPa。可用于修复搪瓷,粘接金属和陶瓷等。     

Temperature Dependence of the Magnetocrystalline Anisotropy in Nd_2Co_(14)B Compound

Easy and hard magnetization curves of Nd_2Co_(14)B compound have been measured withextracting-sample-magnetometer(μ_0H_(max)=6T)at 10～300 K.Magnetic anisotropy constants K_1 and K_2have been determined by fitting the hard magnetization curves,in which only K_1 ,K_2 and misalignment anglehave been taken as fitting parameters.The values of K_1 and K_2 at 4.2 K were derived by extrapolation.Anisotropy coefficients,x_2~° and x_4~°were derived from the anisotropy constants.The anisotropy constant K_2increases rapidly with increasing temperature when TT_(sr).The temperature depen-dence of the magnetic anisotropy coefficient x_2~° was fitted with the formula.The anisotropy coefficients x_2~°can be well described by the tenth-power law from 4.2 K to T_(sr)and by the sixth-power law from T_(sr_ to 300 K.     

AGING BEHAVIOUR OF PARTICULATE REINFORCED ALUMINUM ALLOY MATRIX COMPOSITES

The process of aging precipitation in SiC_p/6061 and Al_2O_3/6061 composites were investigated. Hardness testing, differential scanning calorimetry(DSC) and transmission electron microscopy were employed. Results showed that the precipitation phase form directly along dislocation lines in the composites because the particles produce high densities of dislocations which makes vacancy densities in the composites decrease, and the main precipitation phase at peak hardness was β′ phase.     

Effect of Elastic Energy due to Atomic Size Factor on Ordering and Decomposition Behaviour of Binary Solid Solutions

A theory recently developed by the present authors is applied to the study of the effect of elastic energy due to atomic size factor on the transformation behaviour of binary solid solutions. lt is found that elastic interaction energy (EIE), which is a part of the total elastic energy plays a key role in both ordering elastic interaction ordering (EIO) and spinodal decomposition. The present study gives a reasonable explanation to the historical dilemmas, "elastic energy paradox" and "atomic size factor paradox . By solving these confusing problems, the coexistence of ordering (EIO) and decomposition, which has been regarded as impossible by conventional theories. can be well understood. The mechanism is as follows: lowering of elastic energy demands EIO, and such an ordering provides a driving force for spinodal decomposition. Therefore, in alloys with large atomic size factor, spinodal decomposition is preceded and induced by ordering. Ordering and spinodal decomposition are thus closely related processes to each other     

Polycrystalline diamond MESFETs by Au-mask technology for RF applications

Metal-semiconductor field effect transistors (MESFETs) were fabricated on H-terminated polycrystalline diamond.The DC characteristics of the p-channel MESFET showed a maximum drain current density of 204 mA/mm at a gate-source voltage of 6 V,and a maximum transconductance of 20 mS/mm at a gate-source voltage of 1.5 V.The small signal S-parameters of MESFET with 2 100 m gate width and 2 m gate length were measured.An extrinsic cut-off frequency (fT) of 1.7 GHz and the maximum oscillation frequency (fmax) of 2.5 GHz were obtained,which was the first report on diamond MESFETs with RF characteristics in China.     

复合材料蜂窝夹层结构计算的一般方法和进展

本文对目前蜂窝夹层结构有限元分析的方法进行旭纳；对每一种计算模型中所包含的假设作一讨论；指出其适用范围，供设计和强度计算时参考。     

4Cr5MoSiV1热作模具钢锻造加热工艺的改进

攀长钢生产的4Cr5MoSiV1热作模具钢锻材存在超声波探伤合格率较低的问题。分析认为主要原因是沿用较低的锻前加热温度，钢锭加热程度不足造成锻造时大锻材中心没有充分锻透。笔者对4Cr5MoSiV1钢锻造加热工艺进行了递进式改进，逐步调整钢锭加热制度从1180℃最终提高到1270℃．1290℃，同时相应调整退火工艺制度，基本解决了上述问题，探伤废品大幅降低，锻造火次也明显减少，并避免高温加热引起的粗晶降低钢材使用性能，取得了显著的工艺改进效果。另外，采用高温加热也使钢中的显微偏析明显减轻，获得了部分的均匀化扩散退火的效果：一次碳化物减少，尺寸变小，没有尖锐的棱角，冲击韧性比工艺改进前有明显提高。     

基于边际贡献的销售绩效考核设想

怎样对产品种类繁多、产品盈利能力差别很大的企业销售人员进行绩效考核，正确评价这些销售人员的业绩，是生产产品种类繁多、产品盈利能力差别很大的企业人力资源管理面临的一个重要课题。本文试图通过建立基于边际贡献的销售绩效考核体系这一方法，给相关类似企业提供一点思路。