Cache-aided full-duplex: delivery time analysis and optimization

Edge caching has received much attention as a promising technique to overcome the stringent latency and data-hungry challenges in the future generation wireless networks. Meanwhile, full-duplex (FD) transmission can potentially double the spectral efficiency by allowing a node to receive and transmit at the same frequency band simultaneously. In this paper, we investigate the delivery time performance of a cache-aided FD system, in which an edge node, operates in FD mode, serves users via wireless channels and is equipped with a cache memory. Firstly, we derive a closed-form expression for the average delivery time by taking into account the uncertainties of both backhaul and access wireless channels. The derived analysis allows the examination of the impact of key parameters, e.g., cache size and transmit power. Secondly, a power optimization problem is formulated to minimize the average delivery time. To deal with the non-convexity of the formulated problem, we propose an iterative optimization algorithm based on the bisection method. Finally, numerical results are presented to demonstrate the effectiveness of the proposed algorithm. A significant delivery time reduction is achieved by the proposed optimization compared to the FD reference and half-duplex counterpart.

     

Quantification of Tafel coefficients according to passive/active state of steel carbonation‐induced corrosion in concrete

Statistical quantification of Tafel coefficients is investigated in this study for isolated steel rebar embedded in concrete. The survey is supported by a wide experimental campaign carried out earlier to characterize the passive and active states of carbonation‐induced corrosion of steel. Electrochemical measurements (polarization resistance, corrosion potential, Tafel coefficients) and gravimetric estimations of iron loss were regularly conducted over 417 days on 108 concrete specimens. The statistical analysis reveals that the mean value of Tafel coefficients, both cathodic and anodic, is higher under active corrosion, which seems to contradict the general tendency found for chloride‐induced corrosion, while their coefficient of variation is smaller. The statistical inference was based on the first step of distributions fitting the experimental data and then on the second step of goodness‐of‐fit tests. The most suitable of the distributions proposed were the Burr, Rayleigh, and Gamma distributions. A similar analysis was made for the corrosion potential and polarization resistance. The findings of the study will be valuable for probabilistic approaches to corrosion where probabilistic distributions are required.     

Evaluating the Performance of Cooperative NOMA with Energy Harvesting Under Physical Layer Security

Wireless Personal Communications - In this paper, we consider a non-orthogonal multiple access system with imperfect successive interference cancellation and physical layer security where the...     

Differential Game for Distributed Power Control in Device-to-Device Communications Underlaying Cellular Networks

Wireless Personal Communications - In the formulating of power control for wireless networks, the radio channel is commonly formulated using static models of optimization or game theory. In these...     

Investigation of technological approaches for reduction of methanol formation in plum wines

Methanol is natural ingredient of alcoholic beverages and soft drinks; however, the products of its metabolic transformations (formaldehyde and formic acid) are toxic to humans. The aim of this research was to assess the application of different physico‐chemical treatments of pomace in order to find the most efficient method for reducing the methanol during fermentation with the least effect on the sensory properties of the wine. The following procedures were studied: addition of tannins in pomace, addition of phenolic acids, addition of d ‐galacturonic and pectic acid, use of bentonite and zeolite, heat treatment of pomace, thermosonication and treatment of pomace with microwaves. Fruit wine used in this study was produced from plums (Prunus domestica L.). Applied treatments showed variable efficiency in reduction of methanol formation in plum wine. It may be noted that the procedures that involved some form of thermal treatment were characterized by a significant decrease in the production of methanol (up to 60–70%) but mostly tended to have a negative impact on the sensory properties of the produced wines. However, exposure of pomace to microwaves for a short time, owing to the contribution of mechanisms of non‐thermal nature (kinetic and chemical), allowed for a significant reduction in methanol formation with a negligible impact on the sensory properties. The decrease in methanol formation during fermentation using tannins, pectic acid, bentonite and zeolite was poor, with only a reduction of up to 15%. Obtained results are significant to the fruit wine and spirit industry, considering the common problem related to an increased content of methanol in these beverages. Copyright © 2016 The Institute of Brewing & Distilling     

Carob Kibble: A Bioactive‐Rich Food Ingredient

Carob (Ceratonia siliqua L.) is well known for its valuable locust bean gum obtained from the carob seeds. Separation of seeds from the pod leaves behind the carob kibble which is a good source of dietary fiber, sugars, and a range of bioactive compounds such as polyphenols and pinitol. Bioactive compounds present in carob kibble have been found to be beneficial in the control of many health problems such as diabetes, heart diseases, and colon cancer due to their antidiabetic, antioxidant, and anti‐inflammatory activities. Carob kibble has substantial potential to be used as a food ingredient. This article focuses on the composition, health benefits, and food applications of carob kibble.     

Transfer of noncorresponding spatial associations to the auditory Simon task.

Four experiments examined transfer of noncorresponding spatial stimulus-response associations to an auditory Simon task for which stimulus location was irrelevant. Experiment 1 established that, for a horizontal auditory Simon task, transfer of spatial associations occurs after 300 trials of practice with an incompatible mapping of auditory stimuli to keypress responses. Experiments 2-4 examined transfer effects within the auditory modality when the stimuli and responses were varied along vertical and horizontal dimensions. Transfer occurred when the stimuli and responses were arrayed along the same dimension in practice and transfer but not when they were arrayed along orthogonal dimensions. These findings indicate that prior task-defined associations have less influence on the auditory Simon effect than on the visual Simon effect, possibly because of the stronger tendency for an auditory stimulus to activate its corresponding response. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Improved frequency/voltage converters for fast quartz crystal microbalance applications

The monitoring of frequency changes in fast quartz crystal microbalance (QCM) applications is a real challenge in today's instrumentation. In these applications, such as ac electrogravimetry, small frequency shifts, in the order of tens of hertz, around the resonance of the sensor can occur up to a frequency modulation of 1 kHz. These frequency changes have to be monitored very accurately both in magnitude and phase. Phase-locked loop techniques can be used for obtaining a high performance frequency/voltage converter which can provide reliable measurements. Sensitivity higher than 10 mVHz, for a frequency shift resolution of 0.1 Hz, with very low distortion in tracking both the magnitude and phase of the frequency variations around the resonance frequency of the sensor are required specifications. Moreover, the resonance frequency can vary in a broad frequency range from 5 to 10 MHz in typical QCM sensors, which introduces an additional difficulty. A new frequency-voltage conversion system based on a double tuning analog-digital phase-locked loop is proposed. The reported electronic characterization and experimental results obtained with conducting polymers prove its reliability for ac-electrogravimetry measurements and, in general, for fast QCM applications.