Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Balance-dendrogram. A new routine of CoDaPack

A statistical analysis of compositional data based on the Aitchison geometry of the simplex requires an appropriate basis for representing the data. A simple and intuitive way of building such a basis employs a sequential binary partition of the compositional vector. The partition, together with some statistical summaries of the coordinates, or balances, can be represented in a dendrogram-type graph. In this paper we introduce an implementation of this methodology inside CoDaPack, which is freeware. An example with real data illustrates the use of the Balance-Dendrogram routine.     

An executable subset of VDM-SL in an SA/RT framework

In this article we present the executable specification language IPTES Meta-IV based on the formal specification language VDM-SL. The language has been fitted to work in an SA/RT framework and the article presents how it supports the specification of the data transformation part of SA/RT. Furthermore we present some of the advanced constructs of the language seen as an executable specification language in its own right. Finally we present how an IPTES Meta-IV interpreter is used in combination with a high-level timed Petri net executor to execute SA/RT models.     

Familial ring (19) chromosome mosaicism: case report and review

Ring (19) chromosomal mosaicism has been identified in a 14-month-old girl referred for cytogenetic evaluation due to microcephaly and developmental delay with autistic-like mannerisms. An analysis of her peripheral blood lymphocytes showed a 46,XX,r(19) cell line in 119/121 of cells examined. Of the two remaining cells, one had a normal female chromosome complement and the other showed loss of one of the chromosome 19 homologs. Further analysis by fluorescence in situ hybridization using an all human telomere probe showed the presence of a single hybridization signal on the r(19) chromosome. Subsequent cytogenetic characterization of cells derived from the patient's phenotypically normal mother also demonstrated the presence of a ring 19 chromosome in 4/100 cells. The remaining cells had a normal female chromosome complement. These findings represent the first reported case of familial ring 19 mosaicism. The cytogenetic and clinical findings in these two individuals are discussed in relation to six previously reported cases of de novo ring chromosome 19 mosaicism.     

An expert PID controller uses refined ziegler and nichols rules and fuzzy logic ideas

This article proposes a scheme for the on-line adjustment of three mode controller settings based on experimental measurements of closed-loop performance. It uses a recently developed heuristic tuning procedure to identify estimated process parameters. This method may give rise to conflicting estimates. Fuzzy Set theory is applied to manage the situation in terms of a fuzzy conjunction to combine the various estimates. PID control was chosen because of its wide use in the industrial environment due to driving simplicity and robustness. The article shows design, development, and computer simulation aspects.     

Coating of carbon-fiber surface by silicon carbide via sol-gel mixtures of tetraethyl orthosilicate and phenolic resin

The preparation of a SiC coating on a carbon fiber surface using a sol-gel mixture of tetraethyl orthosilicat (TEOS) and phenolic resin was studied. FTIR and SEM investigations indicated that the SiC coating can be formed by carbothermal reduction of the sol-gel mixture at 1420°C for 15–20 min in an argon atmosphere. TGA of the coated fiber was also performed, showing that the SiC coating improves the thermooxidative stability of the carbon fiber. With the thickness of the obtained coating of 0.47 μm using a C/Si ratio of 4, this treatment does not affect the carbon fiber strength.