Monitoring the Ratio of Two Normal Variables Using EWMA Type Control Charts

In many fields, there is the need to monitor quality characteristics defined as the ratio of two random variables. The design and implementation of control charts directly monitoring the ratio stability is required for the continuous surveillance of these quality characteristics. In this paper, we propose two one‐sided exponentially weighted moving average (EWMA) charts with subgroups having sample size n > 1 to monitor the ratio of two normal random variables. The optimal EWMA smoothing constants, control limits, and ARLs have been computed for different values of the in‐control ratio and correlation between the variables and are shown in several figures and tables to discuss the statistical performance of the proposed one‐sided EWMA charts. Both deterministic and random shift sizes have been considered to test the two one‐sided EWMA charts' sensitivity. The obtained results show that the proposed one‐sided EWMA control charts are more sensitive to process shifts than other charts already proposed in the literature. The practical application of the proposed control schemes is discussed with an illustrative example. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanical property enhancement of aligned multi-walled carbon nanotube sheets and composites through press-drawing process

A solid-state drawing and winding process was done to create thin aligned carbon nanotube (CNT) sheets from CNT arrays. However, waviness and poor packing of CNTs in the sheets are two main weaknesses restricting their reinforcing efficiency in composites. This report proposes a simple press-drawing technique to reduce wavy CNTs and to enhance dense packing of CNTs in the sheets. Non-pressed and pressed CNT/epoxy composites were developed using prepreg processing with a vacuum-assisted system. Effects of pressing on the mechanical properties of the aligned CNT sheets and CNT/epoxy composites were examined. Pressing with distributed loads of 147, 221, and 294 N/m showed a substantial increase in the tensile strength and the elastic modulus of the aligned CNT sheets and their composites. The CNT sheets under a press load of 221 N/m exhibited the best mechanical properties found in this study. With a press load of 221 N/m, the pressed CNT sheet and its composite, respectively, enhanced the tensile strength by 139.1 and 141.9%, and the elastic modulus by 489 and 77.6% when compared with non-pressed ones. The pressed CNT/epoxy composites achieved high tensile strength (526.2 MPa) and elastic modulus (100.2 GPa). Results show that press-drawing is an important step to produce superior CNT sheets for development of high-performance CNT composites.     

Reproducible Enhancement of Fluorescence by Bimetal Mediated Surface Plasmon Coupled Emission for Highly Sensitive Quantitative Diagnosis of Double‐Stranded DNA

Plasmonic enhancement of fluorescence from SYBR Green I conjugated with a double‐stranded DNA (dsDNA) amplicon is demonstrated on polymerase chain reaction (PCR) products. Theoretical computation leads to use of the bimetallic (Au 2 nm–Ag 50 nm) surface plasmons due to larger local fields (higher quality factors) than monometallic (Ag or Au) ones at both dye excitation and emission wavelengths simultaneously, optimizing fluorescence enhancement with surface plasmon coupled emission (SPCE). Two kinds of reverse Kretschmann configurations are used, which favor, in signal‐to‐noise ratio, a fluorescence assay that uses optically dense buffer such as blood plasma. The fluorescence enhancement (12.9 fold at maximum) with remarkably high reproducibility (coefficient of variation (CV) < 1%) is experimentally demonstrated. This facilitates credible quantitation of enhanced fluorescence, however unlikely to obtain by localized surface plasmons. The plasmon‐induced optical gain of 46 dB due to SPCE‐active dye molecules is also estimated. The fluorescence enhancement technologies with PCR enables LOD of the dsDNA template concentration of ≈400 fg µL^?1 (CV < 1%), the lowest ever reported in DNA fluorescence assay to date. SPCE also reduces photobleaching significantly. These technologies can be extended for a highly reproducible and sufficiently sensitive fluorescence assay with small volumes of analytes in multiplexed diagnostics.     

Integratable non-clogging microconcentrator based on counter-flow principle for continuous enrichment of CaSki cells sample

This study addresses the need to reduce the risk of clogging when preparing samples for cell concentration, i.e., the CaSki Cell-lines (epidermoid cervical carcinoma cells). Aiming to develop a non-clogging microconcentrator, we proposed a new counter-flow concentration unit characterized by the directions of penetrating flows being at an obtuse angle to the main flow, due to employment of streamlined turbine blade-like micropillars. Based on the optimization results of the counter-flow unit profile, a fractal arrangement for the counter-flow concentration unit was developed. A counter-flow microconcentrator chip was then designed and fabricated, with both the processing layer and collecting layer arranged in terms of the honeycomb structure. Visualized experiments using CaSki cell samples on the microconcentrator chip demonstrated that no cell-clogging phenomena occurred during the test and that no cells were found in the final filtrate. The test results show an excellent concentration performance for the microconcentrator chip, while a concentrating ratio of >4 with the flow rate being below 1.0 ml/min. As only geometrical structure is employed in the passive device, the counter-flow microconcentrator can be easily integrated into advanced microfluidic systems. Owing to the merit of non-clogging and continuous processing ability, the counter-flow microconcentrator is not only suitable for the sample preparation within biomedical field, but also applicable in water-particle separation.     

A reversible data hiding scheme using complementary embedding strategy

Obtaining good visual quality and high hiding capacity with reversible data hiding systems is a technically challenging problem. In this paper, we propose a simple reversible data hiding scheme that uses a complementary hiding strategy. The proposed method embeds one secret bit horizontally and vertically into one cover pixel of a grayscale cover image by decreasing odd-valued pixels and increasing even-valued pixels by one. Experimental results show that the hiding capacity measured by bit per pixel (bpp) of the proposed scheme is at least 1.21 bpp with a PSNR (peak signal-to-noise ratio) value greater than 52 dB for all standard test images. Especially in the case of four-layer embedding, the PSNR value of the proposed method is still greater than 51 dB at a hiding capacity of about 5 bpp for all standard test images. In addition, the proposed method is quite simple because it primarily uses additions and subtractions. These results indicate that the proposed scheme is superior to many existing reversible data hiding schemes introduced in the literature.     

Dissipative particle dynamics simulations for fibre suspensions in newtonian and viscoelastic fluids

A versatile model of fibre suspensions in Newtonian and viscoelastic fluids has been developed using dissipative particle dynamics method. The viscoelastic fluid is modelled by linear chains with linear connector spring force (the Oldroyd-B model), which is known to be a reasonable model for the so-called Boger fluid (a dilute suspension of polymer in a highly viscous solvent). The numerical results are in excellent agreement with the analytical results of the Oldroyd-B model in simple shear flow. An effective meso-scale model of fibre in DPD is proposed and then incorporated with simple Newtonian fluid and our Boger fluid to enable entirely study rheological properties of fibre suspensions in both Newtonian and viscoelastic solvents. The numerical results are well compared with available experimental data and other numerical models.     

Combination of convex theories: Modularity,deduction completeness,and explanation

Decision procedures are key components of theorem provers and constraint satisfaction systems. Their modular combination is of prime interest for building efficient systems, but their effective use is often limited by poor interface capabilities, when such procedures only provide a simple “sat/unsat” answer. In this paper, we develop a framework to design cooperation schemas between such procedures while maintaining modularity of their interfaces. First, we use the framework to specify and prove the correctness of classic combination schemas by Nelson–Oppen and Shostak. Second, we introduce the concept of deduction complete satisfiability procedures, we show how to build them for large classes of theories, then we provide a schema to modularly combine them. Third, we consider the problem of modularly constructing explanations for combinations by re-using available proof-producing procedures for the component theories.     

Spin-valve planar Hall sensor for single bead detection

The planar Hall effect (PHE) sensor with a junction size of 3 μm × 3 μm for a single micro-bead detection has been fabricated successfully using a typical spin-valve thin film Ta(5)/NiFe(16)/Cu(1.2)/NiFe(2)/IrMn(15)/Ta(5) nm. The PHE sensor exhibits a sensitivity of about 7.2 μV Oe^?1 in the magnetic field range of ±7 Oe approximately. We have performed an experiment to illustrated the possibility of single micro-bead detection by using a PHE sensor. A single micro-bead of 2.8 μm diameter size is secluded from 0.1% dilute solution of the Dynabeads^® M-280 dropped on the sensor surface and is located on the sensor junction by using a micro magnetic needle. The comparison of the PHE voltage profiles in the field range from 0 to 20 Oe in the absence and presence of a single micro-bead identifies a single Dynabeads^® M-280, the maximal signal change as large as ΔV ～ 1.1 μV can be obtained at the field ～6.6 Oe. The results are well described in terms of the reversal of a basic single domain structure.     

TRUST BY ASSOCIATION: A META‐REPUTATION SYSTEM FOR PEER‐TO‐PEER NETWORKS

Trust mechanisms are used in peer‐to‐peer (P2P) networks to help well‐behaving peers find other well‐behaving peers with which to trade. Unfortunately, these trust mechanisms often do little to keep badly behaving peers from entering and taking advantage of the network, which makes the resulting network difficult or impossible to use for legitimate purposes such as e‐commerce. We propose trust by association, a way of tying peers together in invitation‐only P2P networks in such a way as to encourage the removal of badly behaving peers. We use invitations to create a structure within the otherwise ad hoc P2P network. Using this structure, we create a meta‐reputation system where we measure a peer’s trustworthiness not only by its own behavior, but also by the behavior of the peers it has invited to join. The connection created between the peers takes advantage of the external social relationship that must exist before a peer can be invited into the network. The result is a P2P network where, rather than just trying to marginalize badly behaving peers, there is incentive to kick them out of the network. We present results from a simple simulation showing that our approach works well in general when combined with and compared to an existing trust mechanism.