Polyampholyte acrylic latexes for tablet coating applications

Polyampholyte latexes can exist within a certain pH range as low‐viscosity aqueous dispersions, while upon a pH shift to the vicinity of the isoelectric point they undergo ionic coacervation. Three classes of coacervation latexes were synthesized and evaluated for their suitability for use in tablet coating applications. Pharmaceutical tablet coatings are commonly based on hydroxypropyl methyl cellulose, poly(vinyl alcohol), and acrylic polymers. Because of the high viscosity of their aqueous solutions, and to the consequent required low concentrations of the tablet coating polymers in the coating solutions to enable sufficiently low viscosity for effective spray application, the current commercial pharmaceutical tablet coating technology requires the removal of large amounts of water during the manufacturing process. In this work, films prepared from high‐solids, low‐viscosity coacervated acrylic latexes showed good hardness, very low tackiness, an excellent combination of optical properties, and very low water vapor permeability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40049.     

Efficient Engineering and Production Concepts for Products in Regulated Environments – Dream or Nightmare?

Manufacturing of chemical‐pharmaceutical products is moving increasingly fast on a global scale. Therefore, developing and starting up production facilities fast, with high quality, and at reasonable costs has become extremely challenging. Engineering concepts like modularization, standardization and simultaneous/parallel engineering are discussed as methods for speeding up process design and filing for regulatory approval. Transfer from batch to continuous operation mode of production is pointed out as the key‐issue in such strategies.     

Effects of mesoporous silica particles on the emulsion polymerization of methyl methacrylate

Rod‐like and spherical mesoporous SBA‐15 silica particles were synthesized as pure silicas and surface modified by organosilane coupling agents firstly, and then the effects of these mesoporous materials on the critical micelle concentration (CMC) of sodium dodecylsulfate (SDS), the stabilities of batch and semi‐continuous MMA emulsion polymerizations, and the molecular weights and molecular weight distributions of the polymer products were studied. The incorporation of both unmodified and silane‐modified forms of the mesoporous silica particles in the polymerization reaction increased the CMC of SDS. The presence of the unmodified mesoporous silica in the polymerization process led to instability in the batch emulsion polymerization process, as indicated by the formation of increased amounts of coagulum, and a decrease in the molecular weight of the polymer product. However, in comparison to the polymer formed in the absence of particle additives the molecular weight of the PMMA polymer increased with the amount of emulsifier and the addition of silane‐modified SBA‐15 particles, suggesting the growth of the polymer chains is facilitated at least in part by reaction in the pores of the particles. The improvement in molecular weight indicates that semi‐continuous MMA emulsion polymerization is best suited for the preparation of PMMA–mesoporous silica composites. POLYM. ENG. SCI., 54:2746–2752, 2014. © 2013 Society of Plastics Engineers     

Fabrication and characterization of poly(methyl methacrylate)/CaCu3Ti4O12 composites

Composites comprising Poly(Methyl Methacrylate) (PMMA) and CaCu₃Ti₄O₁₂ (CCTO) via melt mixing followed by hot pressing were fabricated. These were characterized using X‐ray diffraction, thermo gravimetric, scanning electron microscopy, and Impedance analyzer for their structural, morphology, and dielectric properties. Composites were found to have better thermal stability than that of pure PMMA. The composite, with 38 Vol % of CCTO (in PMMA), exhibited remarkably low dielectric loss at high frequencies and the low frequency relaxation is attributed to the space charge polarization/MWS effect. Theoretical models were employed to rationalize the dielectric behavior of these composites. At higher temperatures, the relaxation peak shifts to higher frequencies, due to the merging of both β and α relaxations into a single dielectric dispersion peak. The AC conductivity in the high frequency region was attributed to the electronic polarization. POLYM. ENG. SCI., 54:551–558, 2014. © 2013 Society of Plastics Engineers     

Powder coating of veneered particle board surfaces by hot pressing

The powder coating of veneered particle boards by the sequence electrostatic powder application – powder curing via hot pressing is studied in order to create high gloss surfaces. To obtain an appealing aspect, veneer sheets were glued by heat and pressure on top of particle boards and the resulting surfaces were used as carrier substrates for powder coat finishing. Prior to the powder coating, the veneered particle board surfaces were pre-treated by sanding to obtain good uniformity and the boards were stored in a climate chamber at controlled temperature and humidity conditions to adjust an appropriate electrical surface resistance. Characterization of surface texture was done by 3D microscopy. The surface electrical resistance was measured for the six veneers before and after their application on the particle board surface. A transparent powder top-coat was applied electrostatically onto the veneered particle board surface. Curing of the powder was done using a heated press at 130 °C for 8 min and a smooth, glossy coating was obtained on the veneered surfaces. By applying different amounts of powder the coating thickness could be varied and the optimum amount of powder was determined for each veneer type.     

From Isonitriles to Unsaturated NHC Complexes of Gold,Palladium and Platinum

In a modular template synthesis, unsaturated NHC complexes of gold, palladium and platinum were synthesized from simple metal salts, isonitriles and amines with acetal or ketal groups. Upon the addition of amines with tethered acetal or ketal moieties to the metal‐activated isonitrile, first nitrogen acyclic carbene (NAC) complexes are formed. These undergo ring closure and elimination to the unsaturated NHC complexes upon addition of acid. This simple strategy opens an attractive and fast approach to NHC complexes of gold, palladium and platinum. The modular approach allows a fast modification and is well‐suited for the synthesis of unsymetrically and symmetrically substituted unsaturated NHC complexes.

     

Unraveling the Dynamic Nanoscale Reducibility (Ce4+ → Ce3+) of CeOx–Ru in Hydrogen Activation

The interaction of molecular hydrogen with ceria is of important relevance for heterogeneous catalysis related to green chemistry and renewable energy. Here, the complex structural transformations of a well‐defined cerium oxide model catalyst are followed in situ and in real time when exposed to a reactive H₂ environment. By using electron spectromicroscopy and diffraction with chemical and structural sensitivities, it is demonstrated that the transition from CeO₂ to crystalline Ce₂O₃ occurs through a mixture of transient, coexisting phases on the nanoscale. The findings establish a clear relationship between structure and functionality for hydrogen dissociation over ceria(111), bearing profound implications on the nature of the reduction (Ce⁴⁺ → Ce³⁺) and mechanism for H₂ scission.     

Modeling photon transport in fluorescent solar concentrators

Fluorescent solar concentrators (FSC) can concentrate light onto solar cells by trapping fluorescence through total internal reflection. In an ideal FSC, the major obstacle to efficient photon transport is the re‐absorption of the fluorescence emitted. In order to decompose the contribution of different photon flux streams within a FSC, the angular dependent re‐absorption probability is introduced and modeled in this paper. This is used to analyze the performance of different FSC configurations and is also compared with experimental results. To illustrate the application of the modeling, the collection efficiency of ideal devices has also been calculated from the re‐absorption probability and is shown to be useful for estimating non‐ideal losses such as those due to scattering or reflection from mirrors. The results also indicate that among the FSCs studied, the performance of those surrounded by four edge solar cells is close to ideal. The rapid optimization of FSCs has also been presented as another practical application of the models presented in this paper. © 2014 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons, Ltd.