Mass-Balance Model of Pulmonary Oxygen Transport

A dynamic lumped-parameter model for pulmonary gas transport has been developed to characterize the lung and predict the effect of various parameter changes. The gas side of the lung is modeled as a series and parallel arrangement of five perfectly mixed, variable-volume compartments that correspond roughly to airway and alveolar regions. The blood side of the lung is modeled as a series of perfectly mixed, constant-volume compartments that represent the pulmonary capillary bed. From nonsteady mass balances, equations are derived which yield the time course of concentration for each compartment. Model simulations indicate that the oxygen-hemoglobin reaction does not reach equilibrium in the pulmonary capillaries, an assumption commonly made in analyses of pulmonary oxygen transport. Simulations also show the extent to which breathing amplitude and rate can affect the oxygen level in the blood leaving the lung. A comparison of simulations for a normal state and chronic obstructive lung disease (COLD) with identical input conditions demonstrates that the oxygen level in the blood leaving the lung is much lower in COLD. Also, the simulations are compared with experimental findings.     

Compound types and properties of Utah and Athabasca tar sand bitumens

Properties and compound types were examined in detail for tar-sand bitumens representative of four major deposits in Utah and Alberta. Methods for bitumen extraction, separation, and compound type (functional group) analysis are presented. Results of the analyses are compared with each other and with results in the literature for tar-sand bitumens and petroleum. Comparison of the results of Utah bitumens with the Athabasca bitumen provides a basis for evaluation of the Utah bitumens because considerable information about the processing characteristics of the Athabasca bitumen has been reported. Simulated distillation and Chromatographic separation data indicate that, in general, the tarsand bitumens most closely resemble Wilmington petroleum with respect to hydrocarbon/non-hydrocarbon distribution, especially in the non-distilling portion (the distillable portions, mainly hydrocarbons, are similar for all samples). Tar-sand bitumens were also shown to differ significantly from one another, principally in the amounts and kinds of heteroatomic compound types present. This information is important because of the effects that composition has on recovery and refining processes. Analyses of the chemical functionalities also provide a basis for developing correlations between bitumen composition and the recovery and processing characteristics of the bitumen.     

Mechanical properties of certain oriented crystalline polymers

The yield stress is a simple function of the deformation ratio in the direction of testing for specimens oriented by uniaxial or biaxial stretching or rolling. Unless the yield stress increases more rapidly than in proportion to the deformation ratio, there will be instability during tensile creep under high loads. The relative merit of various polymers differs for creep and stress relaxation. Fatigue and bend recovery are also related to the molecular structure.     

Incorporation of surface-modified UHMWPE powders and fibers in tough polyurethane composites

Ultrahigh molecular weight polyethylene (UHMWPE) powder (60 micron diameter) and chopped fiber (6.5 mm length) were surface treated with a blend of reactive gases (fluorine and oxygen.) These powders and fibers were then compounded into a thermoset polyurethane matrix. Surface-treated and control reinforcements are compared at a 10 vol.% loading level. Tensile testing indicates improved stress transfer with surface treatment. Stress transfer is also improved with fibers versus powders. Fracture toughness is characterized by measuring the essential work of fracture, w_e. Surface-treated fiber composites exhibit work of fracture values almost three times the unfilled polyurethane values. Abrasion resistance was also measured. Surface treatment was found to significantly lower wear rates of powder composites. Fiber composites had lower wear rates than powder composites, although surface treatment had little effect. An approximate inverse relationship was found between wear rate and essential work of fracture.     

Evaluation of chromic oxide,glycerol triether,and β-sitosterol as fecal flow markers in two species of nonhuman primates

Recovery of β-sitosterol, glycerol triether (1-hexadecyl-2,3,-didodecyl glycerol triether), and chromic oxide was studied in African green monkeys and stumptail macaques consuming diets containing 0.75 mg/Cal cholesterol and 38% of calories as safflower oil or butter. Following oral administration of these compounds, feces were collected daily for 9 days. For all animals, excretion of β-sitosterol and glycerol triether paralleled one another almost exactly. Except for two animlas, this was also true for chromic acid. Essentially 100% of the administered β-sitosterol and 90–95% of the glycerol triether were recovered; excretion of these markers virtually was complete by day 3. Ninety-two percent of the β-sitosterol was isolated in the nonsaponifiable lipid extract of the feces with less than 6% in the remaining aqueous phase. A maximum of 3.1% of the β-sitosterol and 1.8% of the glycerol triether were found in the blood. For stumptail macaques, the major excretory form of β-sitosterol was the 5β-derivative. African green monkeys were more variable; one animal excreted the bulk of the β-sitosterol unchanged while others excreted greater than 80% as the ring-saturated 5β-derivative. Animals consuming the safflower oil containing diet consistently excreted a greater percentage of the β-sitosterol unchanged, compared with those animals eating the butter containing diet. There was no evidence for steroid ring degradation in any of the animals used in this study.     

Super-resolution: a comprehensive survey

Super-resolution, the process of obtaining one or more high-resolution images from one or more low-resolution observations, has been a very attractive research topic over the last two decades. It has found practical applications in many real-world problems in different fields, from satellite and aerial imaging to medical image processing, to facial image analysis, text image analysis, sign and number plates reading, and biometrics recognition, to name a few. This has resulted in many research papers, each developing a new super-resolution algorithm for a specific purpose. The current comprehensive survey provides an overview of most of these published works by grouping them in a broad taxonomy. For each of the groups in the taxonomy, the basic concepts of the algorithms are first explained and then the paths through which each of these groups have evolved are given in detail, by mentioning the contributions of different authors to the basic concepts of each group. Furthermore, common issues in super-resolution algorithms, such as imaging models and registration algorithms, optimization of the cost functions employed, dealing with color information, improvement factors, assessment of super-resolution algorithms, and the most commonly employed databases are discussed.     

Structure formation during spinning of poly(p-phenylenebenzobisthiazole) fiber

The structure formed in the coagulation stage of the spinning process of poly(p-phenylene benzobisthiazole) fiber is studied by electron microscopy. An oriented network of microfibrils with typical fibril diameters of about 80-100Å is observed. We suggest that these microfibrils are the fundamental structural elements of the fiber. Thus, knowledge of the mechanism by which this initial structure is formed may allow for better control of final fiber properties. The relation of structure formation during coagulation to the phase diagram of a rigid polymer solution and to the kinetic mechanism of the phase transition is discussed.     

Online scheduling and placement of hardware tasks with multiple variants on dynamically reconfigurable field-programmable gate arrays

Hardware task scheduling and placement at runtime plays a crucial role in achieving better system performance by exploring dynamically reconfigurable Field-Programmable Gate Arrays (FPGAs). Although a number of online algorithms have been proposed in the literature, no strategy has been engaged in efficient usage of reconfigurable resources by orchestrating multiple hardware versions of tasks. By exploring this flexibility, on one hand, the algorithms can be potentially stronger in performance; however, on the other hand, they can suffer much more runtime overhead in selecting dynamically the best suitable variant on-the-fly based on its runtime conditions imposed by its runtime constraints. In this work, we propose a fast efficient online task scheduling and placement algorithm by incorporating multiple selectable hardware implementations for each hardware request; the selections reflect trade-offs between the required reconfigurable resources and the task runtime performance. Experimental studies conclusively reveal the superiority of the proposed algorithm in terms of not only scheduling and placement quality but also faster runtime decisions over rigid approaches.     

Synthesis of transparent fluorocarbon elastomers: Effect of crosslinker type and electron beam irradiation level on physical and mechanical behavior

Saturated fluorocarbon elastomers are very resistant to chemical reactions, including those of a crosslinking nature. In order to study proper methods of preparing these materials, Viton GLT was mixed with various levels of trimethylol propane trimethacrylate, TMPTM, and triallyl isocyanurate, Diak #7. After molding, the materials were subjected to electron beam irradiation. The glass transition, rubbery modulus, viscoelastic behavior, and equilibrium swelling were used to characterize the materials as a function of crosslinker and irradiation level. In general, the modulus and gel fraction increased with both crosslinker content and irradiation level. Mixtures of both crosslinking monomers produced an unexpected synergism, yielding higher tensile strength, and earlier onset of gelation.