N-Heterocyclization in Gliotoxin Biosynthesis is Catalyzed by a Distinct Cytochrome P450 Monooxygenase

Gliotoxin and related epidithiodiketopiperazines (ETP) from diverse fungi feature highly functionalized hydroindole scaffolds with an array of medicinally and ecologically relevant activities. Mutation analysis, heterologous reconstitution, and biotransformation experiments revealed that a cytochrome P450 monooxygenase (GliF) from the human-pathogenic fungus Aspergillus fumigatus plays a key role in the formation of the complex heterocycle. In vitro assays using a biosynthetic precursor from a blocked mutant showed that GliF is specific to ETPs and catalyzes an unprecedented heterocyclization reaction that cannot be emulated with current synthetic methods. In silico analyses indicate that this rare biotransformation takes place in related ETP biosynthetic pathways.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

Long term stability of electrocaloric response in barium zirconate titanate

The stability of the electrocaloric effect under electric field cycling is an important consideration in the development of solid-state cooling devices. Here we report measurements carried out on Ba(Zr_0.2Ti_0.8)O₃ ceramics which reveal that the adiabatic temperature change, polarization-electric field hysteresis loops and dielectric permittivity/loss show stable behavior up to 10⁵ cycles. We further demonstrate that the loss in electrocaloric response observed after 10⁵ cycles is associated with the migration of oxygen vacancies. As a result, the electrical properties of the material are changed leading to an increase in leakage current and Joule heating. Reversing the polarity of the electric field after every 10⁵ cycles changes the migration direction of oxygen vacancies, thereby preventing charge accumulation at grain boundaries and electrodes. By doing so, the electrocaloric stability is improved and the adiabatic temperature remains constant even after 10⁶ cycles, much higher than achieved in commercially available barium titanate ceramics.     

Stray current-induced corrosion in cathodic protection installations of steel-reinforced concrete structures: FEM study of the critical parameters

A wide range of parameters was investigated by numerical calculations concerning their impact on DC stray current corrosion of reinforced concrete (RC) structures. A simplified model geometry was used to extract the relevant parameters and their interaction in terms of stray current-affected structures. This study mainly focuses on RC structures that are fitted with cathodic protection installations. The findings reveal a complex interaction between the investigated parameters. The possible relevance of further parameters, which is not the subject of this study, was emphasised.     

Effect of pre-treatment and hydraulic retention time on biohydrogen production from organic wastes

This study investigated the effect of pre-treatment and hydraulic retention time (HRT) on biohydrogen production from organic wastes. Various pre-treatments including thermal, base, acid, ultrasonication, and hydrogen peroxide were applied alone or in combination to enhance biohydrogen production from potato and bean wastewater in batch tests. All the pre-treated samples showed higher hydrogen production than the control tests. Hydrogen peroxide pre-treatment achieved the best results of 939.7 and 470 mL for potato and bean wastewater, respectively. Continuous biohydrogen production from sucrose, potato and bean wastewater was significantly influenced by reducing the HRT as 24, 18 and 12 h. Sucrose and potato showed similar behavior, where the hydrogen production rate (HPR) increased with decreasing the HRT. Optimum hydrogen yield results of 320 mL-H₂/g-VS (sucrose) and 150 mL-H₂/g-VS (potato) were achieved at HRT of 18 h. Bean wastewater showed optimum HPR of 0.65 L/L.d with hydrogen yield of 80 mL-H₂/g-VS at 24 h HRT.     

Gas Responsive Nanoswitch: Copper Oxide Composite for Highly Selective H2S Detection

A nanocomposite material based on copper(II) oxide (CuO) and its utilization as a highly selective and stable gas‐responsive electrical switch for hydrogen sulphide (H₂S) detection is presented. The material can be applied as a sensitive layer for H₂S monitoring, e.g., in biogas gas plants. CuO nanoparticles are embedded in a rigid, nanoporous silica (SiO₂) matrix to form an electrical percolating network of low conducting CuO and, upon exposure to H₂S, highly conducting copper(II) sulphide (CuS) particles. By steric hindrance due to the silica pore walls, the structure of the network is maintained even though the reversible reaction of CuO to CuS is accompanied by significant volume expansion. The conducting state of the percolating network can be controlled by a variety of parameters, such as temperature, electrode layout, and network topology of the porous silica matrix. The latter means that this new type of sensing material has a structure‐encoded detection limit for H₂S, which offers new application opportunities. The fabrication process of the mesoporous CuO@SiO₂ composite as well as the sensor design and characteristics are described in detail. In addition, theoretical modeling of the percolation effect by Monte‐Carlo simulations yields deeper insight into the underlying percolation mechanism and the observed response characteristics.     

Dynamic supply chain design: a Delphi study of drivers and barriers

Supply chain management has both in academia and practice proven its important role to sustain and further develop companies’ competitive advantages. This is with initiatives that focus on cost-efficiencies and turnover improvement. During the last two decades, companies have faced complexity in their supply chains currently with increased global operations. The dynamic business environment forces companies to secure a competitive (re-) design of their supply chains. This paper seeks to advance the understanding on the drivers and barriers for such designs. In total, 39 experts (30 from industrial enterprises, 4 senior supply chain consultants and 5 supply chain management professors) have participated in a four-step Delphi study and have identified main drivers for dynamic supply chain design as being cost reduction, delivery reliability and change in demand for agility. The main barriers are identified as forecasting being too weak, supply chain complexity and product portfolio complexity. In addition, an explorative factor analysis has been carried out to identify how drivers and barriers can be grouped together. Finally, the paper compares the drivers and barriers underlining different competitive strategies.     

Anatomy of Skyrmionic Textures in Magnetic Multilayers

Room temperature magnetic skyrmions in magnetic multilayers are considered as information carriers for future spintronic applications. Currently, a detailed understanding of the skyrmion stabilization mechanisms is still lacking in these systems. To gain more insight, it is first and foremost essential to determine the full real‐space spin configuration. Here, two advanced X‐ray techniques are applied, based on magnetic circular dichroism, to investigate the spin textures of skyrmions in [Ta/CoFeB/MgO]_n multilayers. First, by using ptychography, a high‐resolution diffraction imaging technique, the 2D out‐of‐plane spin profile of skyrmions with a spatial resolution of 10 nm is determined. Second, by performing circular dichroism in resonant elastic X‐ray scattering, it is demonstrated that the chirality of the magnetic structure undergoes a depth‐dependent evolution. This suggests that the skyrmion structure is a complex 3D structure rather than an identical planar texture throughout the layer stack. The analyses of the spin textures confirm the theoretical predictions that the dipole–dipole interactions together with the external magnetic field play an important role in stabilizing sub‐100 nm diameter skyrmions and the hybrid structure of the skyrmion domain wall. This combined X‐ray‐based approach opens the door for in‐depth studies of magnetic skyrmion systems, which allows for precise engineering of optimized skyrmion heterostructures.     

Designing business model development tools for sustainability—a design science study

Electronic Markets - The development of business models that boost fundamental changes in behavior to act more economically, ecologically, and socially is a challenging task because the...