改进催化裂解装置再生立管气固输送状态

荆门分公司催化裂解装置由于使用高堆密度催化剂，再生立管出现了气固输送故障，对反应温度和产品收率影响较大。采取改进措施后取得了显著效果，液化气收率可提高约4个百分点，丙烯收率可提高1－3个百分点。     

Fuel management of the HTR-10 including the equilibrium state and the running-in phase

The mode of fuel management of the HTR-10 was studied, including the simulation of the fuel shuffling process and the measurement of the burnup of a fuel element. The prior consideration was the design of the equilibrium state. Based on this the fuel loading of the initial core and the fuel shuffling mode from the initial core through the running-in phase into the equilibrium state were studied. The code system VSOP was used for the physical layout of the HTR-10 at the equilibrium state and in the running-in phase. For the equilibrium state, in order to lessen the difference between the peak and the average burnup, 5-fuel-passage-through-the-core was chosen for the fuel management. The average burnup of the spent fuel for the equilibrium core is 80 000 MWd t⁻¹, and the peak value of it is less than 100 000 MWd t⁻¹ when the burnup of the recycled fuel element is under 72 000 MWd t⁻¹. The mixture of fuel element and graphite element was used for the initial core loading, the volume fractions of the fuel and the graphite elements were 0.57 and 0.43, respectively. During the running-in phase, the volume fraction of graphite will decrease with the fresh fuel elements being loaded from the top of the core and the graphite elements discharged from the bottom of the core. The fuel shuffling mode is similar to that of the equilibrium state. The burnup limit of recycled fuel element is also 72 000 MWd t⁻¹ and the peak burnup is less than 100 000 MWd t⁻¹. Finally the core will be full of fuel elements with a certain profile of burnup and reaches the equilibrium state. According to the characteristics of the pebble-bed high temperature gas-cooled reactor, a calibrating method of concentration of ¹³⁷Cs was proposed for the measurement of fuel burnup.     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

硅酸铋晶体的蚀像形貌

本文研究了提拉法生长的硅酸铋晶体(BSO)的蚀像形貌,比较了{100},{110},{211},{111}面族的腐蚀像特征和腐蚀速度,并用周期性键链(PBC)的形貌理论分析了腐蚀形貌。通过蚀像形貌特征便可方便地进行晶体定向,准确地确定各族晶面之间的相对位置和极轴的方向等。     

��ɫ������������ѡ�꾮Һ����ģʽ

本文应用灰色关联分析方法,对70种不同类型和组成的钻井液,进行了两参数流变模式优选及评价。与现行方法比较的结果表明此方法与现行结果的吻合度高,并有新颖、数据要求量少、结论易于比较等优点。     

基于目录服务的跨平台账户管理

讨论了多重帐户问题在计算机网络管理中诸多弊端。提出以目录服务（Novell NDS）为基础，实现跨平台（NetWare、WindowsNT和Solaris）的帐刻统一管理的方案及详细实施实例。     

低功率激光对细胞质膜通透性及细胞功能的影响

目的:探索低功率激光对细胞质膜通透性及细胞功能的影响。方法:以波长为632.8nm,功率密度为5.4mW/cm~2的氦氖激光照射人外周血淋巴细胞15、30、60分钟,并采用钙荧光指示剂Fura—2/Am定量测试法检测淋巴细胞内游离钙浓度和质膜Ca~(2+)—Mg~(2+)—ATP酶活性变化。结果:照射后淋巴细胞内游离钙浓度明显低于正常(P<0.05);同时细胞膜Ca~(2+)—Mg~(2+)—ATP酶活性增加(P<0.05);而且照射后细胞内游离钙浓度降低与质膜上Ca~(2+)—Mg~(2+)—ATP酶的激活呈负相关。结论:低功率激光照射激活细胞膜Ca~(2+)—Mg~(2+)—ATP酶活性,使细胞膜对钙通透性发生变化,且影响到细胞内Ca~(2+)贮存,造成细胞膜通透性和细胞功能的改变。     

关于蒸汽疏水器规格尺寸选择的探讨

本文依据疏水器作用原理和实践经验对影响选择疏水器规格尺寸的主要因素进行了分析。提出:选择疏水器应排凝水量大,选择倍率适当,符合产品样本的最大、最小工作压力,准确确定其前后压力。     

新高度 新挑战 再铸新辉煌——合肥水泥研究设计院近年来快速成长纪实

悠久的历史奠定跨越的坚实基础1978年,这里还是一片阡陌纵横的薄田荒岗,在一台台机械的轰鸣声中,合肥水泥研究设计院(以下简称“合肥院”)开始组建。来自四川、辽宁、唐山等地的水泥科技力量集中到了这里,     

大透距电磁波CT法在电站坝基勘查中的应用

跨孔电磁波CT法在勘查岩溶方面大有可为。在西南某电站坝基勘查中,成功地应用了跨孔电磁波CT法,分别在左坝肩和右坝肩中所探查的二对孔间,圈出了岩溶的发育范围。所提交的资料已得到钻探、平硐勘探资料、声波和数字摄像的据互相印证。为进一步施工提供了较好的指导作用。本次勘查使用的是最新型的JW—5Q型大功率仪器和新版的处理软件,并成功地使用高频穿透98m地层,是一次很成功的应用。