Stenotrophomonas,Mycobacterium, and Streptomyces in home dust and air: associations with moldiness and other home/family characteristics

Respiratory illnesses have been linked to children's exposures to water‐damaged homes. Therefore, understanding the microbiome in water‐damaged homes is critical to preventing these illnesses. Few studies have quantified bacterial contamination, especially specific species, in water‐damaged homes. We collected air and dust samples in twenty‐one low‐mold homes and twenty‐one high‐mold homes. The concentrations of three bacteria/genera, Stenotrophomonas maltophilia, Streptomyces sp., and Mycobacterium sp., were measured in air and dust samples using quantitative PCR (QPCR). The concentrations of the bacteria measured in the air samples were not associated with any specific home characteristic based on multiple regression models. However, higher concentrations of S. maltophilia in the dust samples were associated with water damage, that is, with higher floor surface moisture and higher concentrations of moisture‐related mold species. The concentrations of Streptomyces and Mycobacterium sp. had similar patterns and may be partially determined by human and animal occupants and outdoor sources of these bacteria.     

Microchip sonic spray ionization

The first microchip version of sonic spray ionization (SSI) as an atmospheric pressure ionization source for mass spectrometry (MS) is presented. The microchip used for SSI has recently been developed in our laboratory, and it has been used before as an atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) source. Now the ionization is achieved simply by applying high (sonic) speed nebulizer gas, without heat, corona discharge, or high voltage. The microchip SSI was applied to the analysis of tetra-N-butylammonium, verapamil, testosterone, angiotensin I, and ibuprofen. The limits of detection were in the range of 15 nM to 4 microM. The technique was found to be highly dependent on the position of the chip toward the mass spectrometer inlet, and on the gas and the sample solution flow rates. The microchip SSI provided dynamic linearity following a pattern similar to that used with electrospray, good quantitative repeatability (RSD=16%), and long-term signal stability.     

Scientists as Midwives to Cluster Emergence: An Institutional Work Framework

The question of how embedded actors can create institutions that support cluster emergence remains unsolved in the cluster and national innovation systems literature. The present paper extends the recent literature on institutional entrepreneurship and institutional work to solve this paradox of embedded agency in the context of science-based clusters. Building on a longitudinal single case study of a functional foods cluster in Finland, we present an institutional work framework for cluster formation. We argue that, in addition to ideational, material and bridging work, authentic leadership work is critical for cluster emergence. The results of the study highlight the opportunities that scientists have to act as midwives to cluster formation, but they also show that well-functioning clusters need a broader support base.     

Quantitative biology of single neurons

The building blocks of complex biological systems are single cells. Fundamental insights gained from single-cell analysis promise to provide the framework for understanding normal biological systems development as well as the limits on systems/cellular ability to respond to disease. The interplay of cells to create functional systems is not well understood. Until recently, the study of single cells has concentrated primarily on morphological and physiological characterization. With the application of new highly sensitive molecular and genomic technologies, the quantitative biochemistry of single cells is now accessible.     

Elucidation of carotenoid patterns in citrus products by means of comprehensive normal-phase x reversed-phase liquid chromatography

A novel approach for carotenoid analysis has been developed. Orange essential oil and juice carotenoids were separated by means of comprehensive dual-gradient elution HPLC, using normal phase with a microbore silica column in the first dimension (first D), reversed phase with a monolithic C18 column in the second dimension (second D), and a 10-port switching valve as an interface. An on-line photodiode array detector was used in order to obtain absorption spectra. Peak identification was obtained by combining retention data with the UV-visible spectra.     

Desorption and ionization mechanisms in desorption atmospheric pressure photoionization

The factors influencing desorption and ionization in newly developed desorption atmospheric pressure photoionization-mass spectrometry (DAPPI-MS) were studied. Redirecting the DAPPI spray was observed to further improve the versatility of the technique: for dilute samples, parallel spray with increased analyte signal was found to be the best suited, while for more concentrated samples, the orthogonal spray with less risk for contamination is recommended. The suitability of various spray solvents and sampling surface materials was tested for a variety of analytes with different polarities and molecular weights. As in atmospheric pressure photoionization, the analytes formed [M + H](+), [M - H](-), M(+*), M(-*), [M - H + O](-), or [M - 2H + 2O](-) ions depending on the analyte, spray solvent, and ionization mode. In positive ion mode, anisole and toluene as spray solvents promoted the formation of M(+*) ions and were therefore best suited for the analysis of nonpolar compounds (anthracene, benzo[a]pyrene, and tetracyclone). Acetone and hexane were optimal spray solvents for polar compounds (MDMA, testosterone, and verapamil) since they produced intensive [M + H](+) ion peaks of the analytes. In negative ion mode, the type of spray solvent affected the signal intensity, but not the ion composition. M(-*) ions were formed from 1,4-dinitrobenzene, and [M - H + O](-) and [M - 2H + 2O](-) ions from 1,4-naphthoquinone, whereas acidic compounds (naphthoic acid and paracetamol) formed [M - H](-) ions. The tested sampling surfaces included various materials with different thermal conductivities. The materials with low thermal conductivity, i.e., polymers like poly(methyl methacrylate) and poly(tetrafluoroethylene) (Teflon) were found to be the best, since they enable localized heating of the sampling surface, which was found to be essential for efficient analyte desorption. Nevertheless, the sampling surface material did not affect the ionization mechanisms.     

"I'm OK but You're Not" and Other Peer-Relational Schemas: Explaining Individual Differences in Children's Social Goals.

This study examined the links among 5th and 6th graders' (279 girls and 310 boys) self- and peer perceptions, social goals, and social behavior. Social goals mediated the effects of self- and peer perceptions on 3 types of behavior: proactive aggression, prosocial behavior, and withdrawal. In addition to their main effects (self-perception predicting variance in agentic goals, peer perception being related to communal goals), self- and peer perception interacted in influencing social goals; for instance, the effects of a positive view of oneself were different in the contexts of a positive versus a negative perception of peers. It is suggested that in order to predict children's social behavior more accurately, researchers should investigate children's dual perceptions of themselves and of their peers--that is, their peer-relational schemas--instead of assessing self-perception and peer perception in isolation from each other. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Chondrocytes from Osteoarthritis Patients Adopt Distinct Phenotypes in Response to Central TH1/TH2/TH17 Cytokines

Chronic low-grade inflammation plays a central role in the pathogenesis of osteoarthritis (OA), and several pro- and anti-inflammatory cytokines have been implicated to mediate and regulate this process. Out of these cytokines, particularly IFNγ, IL-1β, IL-4 and IL-17 are associated with different phenotypes of T helper (T_H) cells and macrophages, both examples of cells known for great phenotypic and functional heterogeneity. Chondrocytes also display various phenotypic changes during the course of arthritis. We set out to study the hypothesis of whether chondrocytes might adopt polarized phenotypes analogous to T_H cells and macrophages. We studied the effects of IFNγ, IL-1β, IL-4 and IL-17 on gene expression in OA chondrocytes with RNA-Seq. Chondrocytes were harvested from the cartilage of OA patients undergoing knee replacement surgery and then cultured with or without the cytokines for 24 h. Total RNA was isolated and sequenced, and GO (Gene Ontology) functional analysis was performed. We also separately investigated genes linked to OA in recent genome wide expression analysis (GWEA) studies. The expression of more than 2800 genes was significantly altered in chondrocytes treated with IL-1β [in the C(IL-1β) phenotype] with a fold change (FC) > 2.5 in either direction. These included a large number of genes associated with inflammation, cartilage degradation and attenuation of metabolic signaling. The profile of genes differentially affected by IFNγ (the C(IFNγ) phenotype) was relatively distinct from that of the C(IL-1β) phenotype and included several genes associated with antigen processing and presentation. The IL-17-induced C(IL-17) phenotype was characterized by the induction of a more limited set of proinflammatory factors compared to C(IL-1β) cells. The C(IL-4) phenotype induced by IL-4 displayed a differential expression of a rather small set of genes compared with control, primarily those associated with TGFβ signaling and the regulation of inflammation. In conclusion, our results show that OA chondrocytes can adopt diverse phenotypes partly analogously to T_H cells and macrophages. This phenotypic plasticity may play a role in the pathogenesis of arthritis and open new therapeutic avenues for the development of disease-modifying treatments for (osteo)arthritis.     

Films of Graphene Nanomaterials Formed by Ultrasonic Spraying of Their Stable Suspensions

Graphene, a two-dimensional carbon allotrope, exhibits excellent optoelectronic properties. The assembly of graphene into films provides a platform to deepen the study of its interaction with varying surfaces, to engineer devices, and to develop functional materials. A general approach to produce graphene films consists of preparing a dispersion and laying it on a substrate of choice, followed by solvent evaporation. Here, we report the preparation of stable suspensions of new types of graphene nanomaterials namely, graphene nanoflowers (GNFs) and multi-layer graphene (MLG) flakes, in ethanol, N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Sprayable suspensions of both GNFs and MLG were prepared in DMF/ethanol, which showed high stability, without addition of any surfactant. The stable suspensions were used to deposit micrometer-thick MLG/GNF films on glass substrates. Calculations of initial droplet size and of timescale of droplet evaporation are performed and possible thermophoretic effects on droplet deposition discussed as well. Coating glass substrates with a methacrylic acid–methyl methacrylate (MA) copolymer prior to the deposition significantly improved the adhesion of the nanomaterials to the substrate. With the MA coating, a substrate coverage of nearly 100% was achieved at 14-min spraying time for 0.05 wt% GNF and 0.1 wt% MLG suspensions. Raman spectra of the GNF and MLG films reveal that the films were made of MLG in which the individual graphene layers rotated from each other as in turbostratic graphene. This work provides a general approach to prepare graphene nanomaterial suspensions and to create films for a variety of applications. The spraying process applied in the current work is highly scalable and allows control of film characteristics through process parameters.

Copyright 2015 American Association for Aerosol Research