Simultaneous Culturing of Cell Monolayers and Spheroids on a Single Microfluidic Device for Bridging the Gap between 2D and 3D Cell Assays in Drug Research

Two‐dimensional (2D) cell cultures have been the primary screening tools to predict drug impacts in vitro for decades. However, owing to the lack of tissue‐specific architecture of 2D cultures, secondary screening using three‐dimensional (3D) cell culture models is often necessary. A microfluidic approach that facilitates side‐by‐side 2D and 3D cell culturing in a single microchannel and thus combines the benefits of both set‐ups in drug screening; that is, the uniform spatiotemporal distributions of oxygen, nutrients, and metabolic wastes in 2D, and the tissue‐like architecture, cell–cell, and cell–extracellular matrix interactions only achieved in 3D. The microfluidic platform is made from an organically modified ceramic material, which is inherently biocompatible and supports cell adhesion (2D culture) and metal adhesion (for integration of impedance electrodes to monitor cell proliferation). To induce 3D spheroid formation on another area, a single‐step lithography process is used to fabricate concave microwells, which are made cell‐repellant by nanofunctionalization (i.e., plasma porosification and hydrophobic coating). Thanks to the concave shape of the microwells, the spheroids produced on‐chip can also be released, with the help of microfluidic flow, for further off‐chip characterization after culturing. In this study, the methodology is evaluated for drug cytotoxicity assessment on human hepatocytes.     

Assessment of the aerosolization potential for fungal spores in moldy homes

The airborne fungal concentration measured with air samplers during specific time intervals may not adequately represent the indoor air quality because of the sporadic nature of spore release from sources. The conventional source evaluation (e.g. swab and tape sampling) characterizes the mold source but does not relate to the fraction of spores that can be aerosolized from a contaminated material. As an alternative to these methods, we have recently developed and laboratory-tested a novel Fungal Spore Source Strength Tester (FSSST). It allows assessing the potential of aerosolization of fungal spores from contaminated surfaces under the most favorable release conditions. In this study, the FSSST was used to characterize the release of spores from four building materials in mold-problem homes. The spores of different species were efficiently aerosolized by the FSSST, exhibiting a total spore release rate ranging approximately from 10(2) to 10(3) cm2/min. For all tested materials, <2% of the spores on the contaminated surface were released during the tests. The airborne spore concentration estimated from the release rate data was found in most cases to be significantly greater than the concentration actually measured in these environments with simultaneous air sampling. The results suggest that the FSSST can be used for the assessment of maximum potential exposure to airborne spores released from identified sources in homes. PRACTICAL IMPLICATIONS: A recently developed FSSST was found to be suitable to measure the aerosolization potential of indoor fungal sources at the most favorable release conditions. The FSSST generates the data that allows assessing the strength of mold sources in homes with respect to their maximum ability to contaminate indoor air with fungi. The novel approach bridges two conventional methods, the air sampling and the direct source evaluation (e.g. swab sampling), thus providing a better representation of the airborne fungal exposure than these methods individually. The device prototype can be used for evaluating the effectiveness of environmental interventions by taking samples before and after the intervention. As a broader application, the FSSST can be utilized for assessing the release of various hazardous biological and non-biological particles from contaminated surfaces.     

Technostress and social networking services: Explaining users' concentration,sleep, identity,and social relation problems

It is common for users of social networking sites and services (SNS) to suffer from technostress and the various associated strains that hinder their well‐being. Despite prior SNS stress studies having provided valuable knowledge regarding SNS stressors and their use consequences, they have not examined the various strains related to well‐being that those stressors can create nor the underlying SNS characteristics. To address this gap in the research, we used a qualitative approach involving narrative interviews. As a contribution, our findings reveal four types of strains related to well‐being (concentration problems, sleep problems, identity problems, and social relation problems) as well as two different patterns with distinct sets of SNS stressors and SNS characteristics that generate those strains. As practical implications, the findings of this study can help technostressed users to identify their strains, understand their underlying SNS characteristics and SNS stressors, and increase the possibility that they will be able to avoid the strains in the future.     

Bioactivity of Greek honey extracts on breast cancer (MCF-7), prostate cancer (PC-3) and endometrial cancer (Ishikawa) cells: Profile analysis of extracts

Historically, honey has been important in Greek culture. The chemical composition and the potential of Greek honey extracts (thyme, pine and fir honey) to influence the oestrogenic activity and the cell viability of breast (MCF-7), endometrial (Ishikawa) and prostate (PC-3) cancer cells were investigated. All honeys contained total phenolics, phenolic acids and hydroxymethylfurfural, the levels being highest in thyme honey. Sugars and volatile compounds, but not fatty acids, were detected in all honey extracts. Thyme, pine and fir honey showed both antioestrogenic and a weak oestrogenic effect at low and high concentration, respectively, in MCF-7 cells. Thyme honey reduced the viability of Ishikawa and PC-3 cells, whereas fir honey stimulated the viability of MCF-7 cells. In conclusion, Greek honeys are rich in phenolic compounds, they modulate oestrogenic activity whereas a thyme honey-enriched diet may prevent cancer-related processes in breast, prostate and endometrial cancer cells.     

HEPA filtration improves asthma control in children exposed to traffic-related airborne particles

Traffic-related airborne particles are associated with asthma morbidity. The aim of this study was to assess the impact of a high-efficiency particulate air (HEPA) filtration on the concentrations of traffic particles and the resultant effect on children with asthma. Forty-three children with asthma were enrolled in this double-blind, placebo-controlled crossover design. A HEPA air cleaner or a placebo “dummy” was placed in participants’ homes for four weeks, interrupted by a one-month washout period, before crossing over to the other treatment arm for four weeks. Air sampling and health outcomes, including asthma control (ACQ) and quality of life (AQLQ) measures, were completed prior to and at the end of each treatment arm. Indoor concentrations of traffic particles were significantly reduced with the HEPA treatment but not with the “dummy” treatment. In participants with poorly controlled asthma and lower quality of life at baseline, ACQ and AQLQ scores were significantly improved (1.3 to 0.9, P = .003 and 4.9 to 5.5, P = .02, respectively) following the HEPA treatment. In this study, HEPA filtration is associated with improved clinical outcomes and quality of life measures in children with uncontrolled asthma.     

Utilization of Pisat temperature-dependency in modelling adsorption on zeolites

In this study, the feasibility of utilizing pure component saturated vapour pressure P_i^sat in representing the temperature-dependency of physisorption of vapours on zeolites is examined. Adsorption data of water, alcohols and aromatic compounds both on hydrophilic on and hydrophobic zeolites has been collected from the literature and represented as a function of P/P_i^sat. It is found that the temperature-dependency of adsorption of a component can be described by the saturated vapour pressure, especially for water adsorption on zeolites. For systems where chemisorption also plays an important role, such as aromatics adsorption on zeolites, P_i^sat alone is not capable of predicting the temperature-dependency accurately enough. It is also observed that contrary to common practice, the maximum adsorption loading q_i^sat on zeolite should be considered independent of temperature. The proposed approach can be used in the modelling and design of industrial processes exploiting adsorption, such as in zeolite membrane systems, where separation is based on both adsorption and diffusion phenomena.     

Analysis of short-term influences of ambient aeroallergens on pediatric asthma hospital visits

The objective of our study was to investigate the association between daily pediatric asthma hospital visits and daily concentrations of aeroallergens and their specific species. Records of daily asthma visits in Cincinnati area were retrieved from Cincinnati Children's Hospital Medical Center and aeroallergen sampling was performed by the Button Inhalable Sampler. The Poisson generalized linear model was carried out in which the log of the number of asthma hospital visits was related to aeroallergen level, treated as a continuous variable with adjustment for seasonal time trend, day of the week, ozone and PM(2.5) concentrations, temperature and humidity. The aeroallergens having a significant impact on asthma hospital visits were ragweed, oak/maple and Pinaceae pollen. Their relative risks on asthma hospital visits with respect to a 100 counts/m(3) increase in concentration were in the range of 1.23 to 1.54. The effects in causing the asthma exacerbation were delayed by 3 or 5 days.     

Collection of Airborne Microorganisms into Liquid by Bubbling through Porous Medium

A new method for the removal of airborne particles by air bubbling through fibrous filters immersed into a liquid has recently been developed (Agranovski et al. 1999) and shown to be very efficient for cleaning air environments with ultra-fine aerosol particles. The principal objective of the present study was to evaluate the new bubbling technique for the collection of airborne bacteria into a liquid for subsequent physical and microbiological analysis. It was found that the technique is capable of achieving a physical collection efficiency of 98.5% or higher for particles larger than 0.3 w m in aerodynamic diameter. The physical collection efficiency of the prototype bubbler remained at that high level for 8 h of continuous operation with negligible variation of the pressure drop across the device. Evaporation of the collection fluid did not exceed 20% during 8 h, and the reaerosolization effect on the physical collection efficiency of the bubbler prototype was <8%. The recovery rate of gram-negative Pseudomonas fluorescens bacteria collected for 20 min was shown to be as high as 74% - 10%. Its decrease with time was not statistically significant: the recovery rate reached 63% - 15% and 58% - 16% after 4 and 8 h of continuous operation, respectively. Thus the bubbling technique was demonstrated to be suitable for collecting viable airborne bacteria even if they are sensitive to the stress.     

The mycobiomes and bacteriomes of sputum,saliva, and home dust

Respiratory microbiome is an understudied area of research compared to other microbiomes of the human body. The respiratory tract is exposed to an array of environmental pollutants, including microbes. Yet, we know very little about the relationship between environmental and respiratory microbiome. The primary aim of our study was to compare the mycobiomes and bacteriomes between three sample types from the same participants, including home dust, saliva, and sputum. Samples were collected from 40 adolescents in a longitudinal cohort. We analyzed the samples using 16s bacterial rDNA and ITS fungal rDNA gene sequencing, as well as quantitative PCR with universal fungal and bacterial primers. Results showed that home dust had the greatest alpha diversity between the three sample types for both bacteria and fungi. Dust had the highest total fungal load and the lowest total bacterial load. Sputum had greater bacterial diversity than saliva, but saliva had greater fungal diversity than sputum. The distribution of major bacterial phyla differed between all sample types. However, the distribution of major fungal classes differed only between sputum and saliva. Future research should examine the biological significance of the taxa found in each sample type based on microbial ecology and associations with health effects.