Experimental Study of Capture Effect for Medium Access Control with ALOHA

In this paper, we investigate the capture effect through experiments conducted with Iris nodes equipped with AT86RF230 radio transceivers. It is shown that the first arriving packet in a collision can capture the radio channel for equal power transmissions and may be decoded depending on the amount of overlap. A new 3‐packet‐capture scenario is introduced and implemented. To be able to understand the impact of capture on the throughput performance of wireless sensor networks, we present an analysis of the capture coefficient using our practical results. For real‐world implementations, the throughput of pure ALOHA considering a finite number of users is presented in analytical form. The capture coefficient is then applied to pure ALOHA as a case study. Using analytical and practical implementations of the capture effect on ALOHA, a very good match in channel throughput performance enhancement is demonstrated over the non‐capture effect case. TinyOS‐2.x is used to program the nodes and to observe data exchange on a computer through a base station.     

The diversity of potential cheese ripening characteristics of lactic acid starter bacteria: 1. Resistance to cell lysis and levels and cellular distribution of proteinase activities

By reference to subcellular fraction markers, the resistance to lysis of 23 strains of Lactococcus lactis subsp. cremoris, 30 strains of L. lactis subsp. lactis and five strains of Streptococcus thermophilus and the levels and distribution of proteinase activity in the strains were determined. Strains of L. lactis subsp. cremoris were readily lysed by transfer to hypotonic buffer after treatment with lysozyme alone, whilst strains of L. lactis subsp. lactis and S. thermophilus could be efficiently lysed in this way only after treatment with a combination of lysozyme and mutanolysin. With a few notable exceptions, those strains which gave the fastest rates of acid production also generally presented higher levels of cell surface proteinase, as determined by activity on fluorescein isothiocyanate-labelled β-casein. The highest levels of cell surface proteinase detected were found for strains of L. lactis subsp. cremoris. However, the levels of total proteinase activity in the lactococcal strains did not correlate with the rate of acid production in milk, some slow acid-producers yielding similar or greater total proteinase levels than fast acid-producers. Homology to DNA probes for the lactococcal cell surface proteinase gene and to the conserved region encoding the serine proteinase active site was shown by the fast acid-producing lactococcal strains, but not by most of the slow acid-producing lactococcal strains or by the strains of S. thermophilus. A significant proportion of the total proteinase activity was recovered in the subcellular fractions in which high levels of cytoplasmic marker enzyme activity were found. The total proteinase levels detected in strains ofL. lactis subsp. lactis showed a greater range of variation than in the strains of L. lactis subsp. cremoris. High levels of total proteinase activity were found in the slow acid-producers despite the strains having been grown in the presence of yeast extract. For many of the strains, the levels of proteinase released from the cell surface during cell wall degradation with lytic enzyme treatment were higher than those found using whole cells, suggesting that a significant amount of proteolytic activity was either inaccessible to substrate or present in an inactive form.     

Thermal stabilities of nanoporous metallic electrodes at elevated temperatures

Currently Pt-based metals are the best catalytic electrodes for fuel cells at operating temperatures below 500 °C. Pure platinum electrodes suffer degradation of microstructure over time at elevated temperatures due to Ostwald ripening. In this paper, better thermal stability of Pt–Ni nanoporous thin films relative to pure Pt is reported. Based on ab initio calculations, it was found that both the surface energy of a Pt_0.7Ni_0.3 cluster and the energy change of the Pt–Ni alloy cluster upon ripening on yttria stabilized zirconia (YSZ) solid electrolyte were lower than pure Pt. This suggested a better thermal stability of Pt_0.7Ni_0.3 than Pt. In addition, annealing impacts on microstructures and properties of nanoporous Pt and Pt–Ni alloy thin films were examined experimentally. SEM images show dramatic porosity reduction for pure Pt after annealing at temperatures of 400–600 °C but insignificant microstructure change for Pt–Ni nanoporous thin films. As a result, in solid oxide fuel cells using nanoporous Pt–Ni cathodic catalysts instead of pure Pt, better stability, lower electrode impedances, and higher power densities were achieved at elevated operating temperatures (350–500 °C).     

The value of monophasic capacitance of few-electron systems

Due to the discreteness of electronic charges in a nanoscale system, capacitance is defined in terms of the total interaction energy of N-electrons confined in a dielectric sphere. Specifically, the distribution of N-electrons is obtained from minimization of the total Coulomb and polarization interaction energy and the formation energy, the work done on the system. Our discrete charge dielectric (DCD) model gives rise to an electrostatic capacitance agreeing with the N=1 and ∞ cases. For nanometer-size devices, the Schrödinger equation should be used; however, for size greater than 10 nm, the Poisson equation accounts for spatial symmetry properties resulting from the discrete nature of interacting electrons. Without metallic components, the equal potential landscape does not coincide with our spherical boundary except for the N=1 case. There is a special configuration associated with each N. Hence, the capacitance defined is monophasic, representing a single electrostatic phase. The most important application of this work may lie in optoelectronics and biological systems.     

Networking lessons in delivering ‘Software as a Service’—part I

This is a two‐part paper. In part I, we describe the origins of Software as a Service (SaaS) and its value proposition to Corporate IT, Service Providers, Independent Software Vendors, and End Users. In part II, we examine the networking lessons learned in researching, building, and running a SaaS service. Copyright © 2002 John Wiley & Sons, Ltd.     

Nanofabrication of gallium nitride photonic crystal light-emitting diodes

We describe a comparison of nanofabrication technologies for the fabrication of 2D photonic crystal structures on GaN/InGaN blue LEDs. Such devices exhibit enhanced brightness and the possibility of controlling the angular emission profile of emitted light. This paper describes three nano lithography techniques for patterning photonic crystal structures on the emitting faces of LEDs: direct-write electron beam lithography, hard stamp nanoimprint lithography and soft-stamp nanoimprint lithography with disposable embossing masters. In each case we describe variations on the technique as well as its advantages and disadvantages. Complete process details have been given for all three techniques. In addition, we show how high performance GaN dry etch techniques, coupled with optical process monitoring can transfer resist patterns into underlying GaN material with high fidelity.     

Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

The European project trust—reconfigurable terminals and supporting networks

To date, research into reconfigurable mobile communications has predominantly focussed on the software radio concept, and specifically on the hardware technologies required to move physical layer processing into a programmable environment [1, 2, 3]. Although an interesting and necessary challenge, this only represents a fraction of the overall support and technology required to realise the potential of the concept. Other necessary developments include network/terminal cooperation for seamless inter-standard handoff, QoS management for software download and reconfiguration, a secure software download mechanism, terminal software and mobile radio network architecture supporting terminal reconfiguration, management for software downloads, configuration management, capability negotiation, radio resource management and spectrum allocation policies etc… This paper describes results from the EuropeanIst Trust (Transparently Reconfigurable UbiquitouS Terminal) [4] project concerning user and operator requirements, the proposed overall system environment, security issues, concerted radio resource management, and expected time frame for the development of reconfigurable terminals.     

Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

FPGA架构的功耗——低功耗FPGA设计的现在和将来

减少FPGA的功耗可带来许多好处,如提高可靠性、降低冷却成本、简化电源和供电方式、延长便携系统的电池寿命等.无损于性能的低功耗设计既需要有高功率效率的FPGA架构,也需要有能驾驭架构组件的良好设计规范.