Assessment of empirical algorithms for bathymetry extraction using Sentinel-2 data

Bathymetry estimated from optical satellite imagery has been increasingly implemented as an alternative to traditional bathymetric survey techniques. The availability of new sensors such as Sentinel-2 with improved spatial and temporal resolution, in comparison with previous optical sensors, offers innovative capabilities for bathymetry derivation. This study presents an assessment of the fit between satellite data and the underlying models in the most widely used empirical algorithms: the linear band model and the log-transformed band ratio model using Sentinel-2A data. Both models were tested in two study areas of the Irish coast with different morphological and environmental conditions. Results showed that the linear band model fitted better than the log-transformed band ratio model providing coefficient of determination values, R², between 0.83 and 0.88 (0 m–10 m) for the five images considered in the study. The closest fit was found in the depth range 2 m–6 m. Atmospheric correction, bottom type influence, and water column conditions proved to be key factors in the bathymetric derivation using these satellite datasets.     

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Herein we report on the synthesis of a metastable (Cr,Y)₂AlC MAX phase solid solution by co-sputtering from a composite Cr–Al–C and elemental Y target, at room temperature, followed by annealing. However, direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room-temperature depositions, followed by annealing to 760°C led to the formation of phase pure (Cr,Y)₂AlC by diffusion. Higher annealing temperatures caused a decomposition of the metastable phase into Cr₂AlC, Y₅Al₃, and Cr-carbides. In contrast to pure Cr₂AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ∼200°C for 5 at.% Y compared to Cr₂AlC. Calculations predicting the metastable phase formation of (Cr,Y)₂AlC and its decomposition are in excellent agreement with the experimental findings.     

Synthesis and Evaluation of Water‐Soluble Prodrugs of Ursodeoxycholic Acid (UDCA), an Anti‐apoptotic Bile Acid

Ursodeoxycholic acid (UDCA) is a bile acid with demonstrated anti‐apoptotic activity in both in vitro and in vivo models. However, its utility is hampered by limited aqueous solubility. As such, water‐soluble prodrugs of UDCA could have an advantage over the parent bile acid in indications where intravenous administration might be preferable, such as decreasing damage from stroke or acute kidney injury. Five phosphate prodrugs were synthesized, including one incorporating a novel phosphoryloxymethyl carboxylate (POMC) moiety. These prodrugs were highly water‐soluble, but showed significant differences in chemical stability, with oxymethylphosphate prodrugs being the most unstable. In a series of NMR experiments, the POMC prodrug was bioactivated to UDCA by alkaline phosphatase (AP) faster than a prodrug containing a phosphate directly attached to the alcohol at the 3‐position of UDCA. Both of these prodrugs showed significant anti‐apoptotic activity in a series of in vitro assays, although the POMC prodrug required the addition of AP for activity, while the other compound was active without exogenous AP.     

Process analysis and optimisation of hybrid processes for the dehydration of ethanol

Promising hybrid processes for ethanol dewatering consist of different combinations of distillation with adsorption and/or vapour permeation. This paper presents an analysis and optimisation of these hybrid processes using non-equilibrium models and an evolutionary algorithm. Four different membrane assisted configurations are compared with a benchmark process consisting of distillation and pressure swing adsorption. In total 12 cases were investigated while assuming different feed and product compositions at different production capacities: three ethanol mass fractions in feed 45, 80, 92 wt.%, two product purities 99.6, 99.95 wt.% and two production capacities 25,000, 250,000 m³/year. The influence of decisive operating and structural variables on important target variables such as total membrane area is demonstrated. Finally, the processes are evaluated regarding operating costs and energy consumption depending on product purity and production capacity. The operating costs of the membrane assisted configurations differ only in a small range of −3% to 6% from those of the benchmark. The energy consumption of the membrane assisted configurations without distillation is up to 30% lower compared to the benchmark. Especially the combination of vapour permeation and adsorption is a promising alternative allowing for producing ethanol with high purities at lower operating pressures compared to the vapour permeation as stand alone process.     

Oxygen Vacancy Relaxation and Domain Wall Hysteresis Motion in Cobalt-Doped Barium Titanate Ceramics

Mechanical and dielectric loss measurements were carried out in the BaTiO₃ ceramics doped with Co at frequencies between 0.01 Hz and 1 MHz as a function of temperature from −150° to 150°C. The relaxation peak observed in the ferroelectric phase with an activation energy of 0.27 eV is assumed to be related to the motion of oxygen vacancies. This peak could be because of the reorientation of an electrical dipole made of oxygen vacancies and Co³⁺ ions in the lattice. Furthermore, another loss peak located just below the Curie temperature T _c could be interpreted as hysteretic motion of the domain walls in a regime where the domain wall density is changing.     

Drag reduction by DNA-grafting for single microspheres in a dilute λ-DNA solution

The fluid resistance of single micrometre-sized blank and DNA-grafted polystyrene microspheres under shear flow is compared in purified water and dilute λ-DNA solutions by means of optical tweezers experiments with a high spatial (±4 nm) and temporal (±0.2 ms) resolution. The measurement results show that the drag experienced by a colloid in a dilute λ-DNA solution (molecular weight of 48,502 bp per molecule, radius of gyration of 0.5 μm) is significantly decreased if the microsphere bears a grafted DNA brush. This newly discovered drag reduction effect is studied for different parameters, comprising the molecular weight of the grafted DNA molecules (250 bp, 1000 bp and 4000 bp), the concentration of the λ-DNA solution (11, 17 and 23 μg ml^?1, all being significantly smaller than the critical entanglement concentration c¹), the microsphere core diameter (2 μm, 3 μm and 6 μm) as well as the flow speed of the medium (10–50 μm s^?1). The maximum extent of the drag reduction is found to amount to (60 ± 20)% compared to the λ-DNA-induced contribution on the drag acting on blank colloids. We propose a theoretical explanation of this effect based on the combination of the dynamic density functional theory of Rauscher and co-workers [Rauscher M. J. Phys.: Condens. Matter 2010;22:364109] and the stagnation length theory of polymer brushes, as it was established by Kim, Lobaskin et al. [Kim et al. Macromolecules 2008;42(10):3650–3655]. In particular, the solution of the Stokes equation (i.e., the Navier–Stokes equation for creeping flow) for the studied system yields a numerical prediction that is found to be in full accord with our experimental results within measurement uncertainty.     

The effective hydrodynamic radius of single DNA-grafted colloids as measured by fast Brownian motion analysis

Optical tweezers accomplished with fast position detection enable one to carry out Brownian motion analysis of single DNA-grafted (grafting density: ∼1000 molecules per particle, molecular weight: 4000 bp) colloids in media of varying NaCl concentration. By that the effective hydrodynamic radius of the colloid under study is determined and found to be strongly dependent on the conformation of the grafted DNA chains. Our results compare well both with recent measurements of the pair interaction potential between DNA-grafted colloids (Kegler et al. Phys Rev Lett 2008; 100:118302) and with microfluidic studies (Gutsche et al. Microfluid Nanofluid 2006; 2:381-386). The observed scaling of the brush height with the ion concentration is in full accord with the theoretical predictions by Pincus, Zhulina, Birshtein and Borisov.