Changes in blood lipids and fibrinogen with a note on safety in a long term study on the effects of n−3 fatty acids in subjects receiving fish oil supplements and followed for seven years

The present study was designed to assess the effectiveness of the n−3 fatty acids in modifying serum total, low density lipoprotein and high density lipoprotein (HDL) cholesterol, as well as serum triglycerides, over a seven-year period. Changes in plasma fibrinogen were recorded and long term safety assessed. A total of 365 subjects with ischemic heart disease (IHD), hyperlipidemia or a strong family history of IHD had their diet supplemented with MaxEPA (Seven Seas Ltd., Hull, England) fish oil containing 18–19% eicosapentaenoic acid. Venous blood samples were taken at regular intervals for lipid and fibrinogen assays and routine clinical chemistry and hematological profiling. Current medication was recorded and no further dietary modification was attempted. Triglyceride and fibrinogen were significantly reduced, whereas a significant reduction in total cholesterol occurred only in the subjects with a pre-oil level>6.5 mmol/L. HDL cholesterol significantly increased over the study period. Clinical chemistry and hematological profiles were not adversely affected, and platelet count did not change significantly. The type of lipid changes observed were those usually considered antiatherogenic. Reducing fibrinogen may result in beneficial changes in the pathological processes leading to thrombotic occlusion. The consumption of MaxEPA by our patients over a seven-year period did not indicate any adverse effects.     

Polyurethane‐infiltrated carbon foams: A coupling of thermal and mechanical properties

The thermal and mechanical properties of polyurethane‐infiltrated carbon foam of various densities were investigated. By combining the high thermal conductivity of the carbon foam with the mechanical toughness of the pure polyurethane, a mechanically tough composite (relative to the unfilled foam) that could be used at higher temperatures than the polyurethane's degradation was formed. Both the tensile strength and the modulus increased by an order of magnitude for the composites compared to unfilled foam, while the compressive and shear strengths and moduli of the composites approached values exhibited by pure polyurethane. At both 300 and 400°C, the rectangular blocks of pure polyurethane lost their mechanical integrity due to decomposition in air. Thermogravimetric analysis confirms substantial initial weight loss above 290°C. Filled carbon foam blocks, however, maintain their mechanical integrity at both 300 and 400°C indefinitely, although the bulk of the rectangular block mass is polyurethane. Three different carbon foam densities are examined. As expected, the higher density foams show greater heat transfer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2348–2355, 2003     

The Yeast ATF1 Acetyltransferase Efficiently Acetylates Insect Pheromone Alcohols: Implications for the Biological Production of Moth Pheromones

Many moth pheromones are composed of mixtures of acetates of long‐chain (≥10 carbon) fatty alcohols. Moth pheromone precursors such as fatty acids and fatty alcohols can be produced in yeast by the heterologous expression of genes involved in insect pheromone production. Acetyltransferases that subsequently catalyze the formation of acetates by transfer of the acetate unit from acetyl‐CoA to a fatty alcohol have been postulated in pheromone biosynthesis. However, so far no fatty alcohol acetyltransferases responsible for the production of straight chain alkyl acetate pheromone components in insects have been identified. In search for a non‐insect acetyltransferase alternative, we expressed a plant‐derived diacylglycerol acetyltransferase (EaDAcT) (EC 2.3.1.20) cloned from the seed of the burning bush (Euonymus alatus) in a yeast system. EaDAcT transformed various fatty alcohol insect pheromone precursors into acetates but we also found high background acetylation activities. Only one enzyme in yeast was shown to be responsible for the majority of that background activity, the acetyltransferase ATF1 (EC 2.3.1.84). We further investigated the usefulness of ATF1 for the conversion of moth pheromone alcohols into acetates in comparison with EaDAcT. Overexpression of ATF1 revealed that it was capable of acetylating these fatty alcohols with chain lengths from 10 to 18 carbons with up to 27‐ and 10‐fold higher in vivo and in vitro efficiency, respectively, compared to EaDAcT. The ATF1 enzyme thus has the potential to serve as the missing enzyme in the reconstruction of the biosynthetic pathway of insect acetate pheromones from precursor fatty acids in yeast.     

Combined spectroscopic/computational studies on Fe- and Mn-dependent superoxide dismutases: insights into second-sphere tuning of active site properties

Superoxide dismutases (SODs) are metalloenzymes that protect aerobic organisms from oxidative damage mediated by the superoxide radical. While the Fe- and Mn-dependent SODs from E. coli possess virtually identical protein folds and active-site geometries, they are strictly metal specific. To explore the origin of this extraordinary metal-ion specificity and to elucidate the mechanisms by which these enzymes tune the geometric and electronic properties, and thus the reactivity, of their active-site metal ions, we utilized a combination of spectroscopic and computational methods to study the native enzymes, their metal-substituted derivatives, and several mutant proteins. Results from our research described in this Account reveal that second-sphere residues are critically involved in controlling both thermodynamic and kinetic properties of the Fe- and MnSOD active sites.     

Enhanced gas migration through permeable bubble networks within consolidated soft sediments

Many consolidated sediments experience in situ gas generation from methanogenesis, corrosion, or radiolysis reactions and can retain bubbles for long periods. Particular interest is motivated by the retention and acute release of flammable hydrogen from nuclear legacy waste sludge. X‐ray computed tomography was employed to observe 0.07–10 mm bubble populations within 30–1112 Pa yield strength Mg(OH)₂ sediments. High rates of partial coalescence were observed among sub‐millimeter microvoids, forming extensive bubble networks which spanned the 32 mm field of view. Lattice Boltzmann and Monte Carlo modeling demonstrated these networks to be highly pervious to gas, with effective diffusivities for hydrogen of 3.7–12.5 × 10^?5 m² s^?1. Continuous vessel‐spanning bubble networks, dynamic connectivity between ganglia of coalesced bubbles, Haines jumps, and composite diffusion through the gas and aqueous phase can account for enhanced gas migration over length‐scales of several meters, thus enabling chronic gas release from low‐intermediate strength sediments ( kPa) too strong for buoyant bubble ebullition and too weak for vertical channel formation. © 2018 The Authors. AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers. AIChE J, 64: 4131–4147, 2018     

Laboratory measurements of light scattering properties of kaolinite dust at 532 nm

Light scattering by kaolinite dust samples at 532 nm is studied using a newly developed laboratory apparatus. During the experiments, dust samples are suspended in water, aerosolized by a nebulizer, and then injected into the scattering zone, with or without going through a diffusion drier, to generate either dried dust particles or water droplets with dust inclusions. The light source is a dual wavelength (532 and 1064 nm) diode-pumped solid state laser. Light scattered by an ensemble of particles is collected by a charge-coupled device (CCD) camera, which is mounted on the rotating arm of a stepper motor. The stepper motor rotates the CCD to cover the scattering angle range from 3° to 177°. Polarized scattering light is measured for the horizontally and vertically polarized incident light. The apparatus is calibrated, using pure water droplets as the scattering media. The response function with respect to the scattering angle is obtained by comparing the measurements with Lorenz–Mie calculations and then used in the later data analysis. Measurements show that the backward scattering features of the water droplets are smoothened due to their dust inclusions. Numerical simulations and measurements are extensively compared and discussed. It is found that the Lorenz–Mie theory is inadequate to reproduce the scattering phase functions of either dust particles or water droplets with dust inclusions. A nonspherical aggregate model is applied to simulate the scattering phase functions. The simulation is able to reproduce the overall scattering features; however, substantial discrepancies still exist due to uncertainties in particle shape and refractive index.

Copyright © 2018 American Association for Aerosol Research     

High-Fat Diet Alters Serum Fatty Acid Profiles in Obesity Prone Rats: Implications for In Vitro Studies

High‐fat diets (HFD) are commonly used in rodents to induce obesity, increase serum fatty acids and induce lipotoxicity in various organs. Invitro studies commonly utilize individual free fatty acids (FFA) to study lipid exposure in an effort to model what is occurring in vivo; however, these approaches are not physiological as tissues are exposed to multiple fatty acids in vivo. Here we characterize circulating lipids in obesity‐prone rats fed an HFD in both fasted and fed states with the goal of developing physiologically relevant fatty acid mixtures for subsequent in vitro studies. Rats were fed an HFD (60 % kcal fat) or a control diet (10 % kcal fat) for 3 weeks; liver tissue and both portal and systemic blood were collected. Fatty acid profiles and absolute concentrations of triglycerides (TAG) and FFA in the serum and TAG, diacylglycerol (DAG) and phospholipids in the liver were measured. Surprisingly, both systemic and portal serum TAG were ~40 % lower in HFD‐fed compared to controls. Overall, compared to the control diet, HFD feeding consistently induced an increase in the proportion of circulating polyunsaturated fatty acids (PUFA) with a concomitant decline in monounsaturated fatty acids (MUFA) and saturated fatty acids (SFA) in both serum TAG and FFA. The elevations of PUFA were mostly attributed to increases in n‐6 PUFA, linoleic acid and arachidonic acid. In conclusion, fatty acid mixtures enriched with linoleic and arachidonic acid in addition to SFA and MUFA should be utilized for in vitro studies attempting to model lipid exposures that occur during in vivo HFD conditions.     

A compact photomicroreactor design for kinetic studies of gas‐liquid photocatalytic transformations

A compact photomicroreactor assembly consisting of a capillary microreactor and small‐scale light emitting diodes was developed for the study of reaction kinetics in the gas‐liquid photocatalytic oxidation of thiophenol to phenyl disulfide within Taylor flow. The importance of photons was convincingly shown by a suction phenomenon due to the fast consumption of oxygen. Mass transfer limitations were evaluated and an operational zone without mass transfer effects was chosen to study reaction kinetics. Effects of photocatalyst loading and light sources on the reaction performance were investigated. Reaction kinetic analysis was performed to obtain reaction orders with respect to both thiophenol and oxygen based on heterogeneous and homogeneous experimental results, respectively. The Hatta number further indicated elimination of mass transfer limitations. Reaction rate constants at different photocatalyst loadings and different photon flux were calculated. Furthermore, the advantages of this photomicroreactor assembly for studying gas‐liquid photocatalytic reaction kinetics were demonstrated as compared with batch reactors. © 2015 American Institute of Chemical Engineers AIChE J, 61: 2215–2227, 2015     

Compressive Creep Performance of SrFeO3

Compressive creep performance of strontium-deficient and strontium-excess SrFeO_3-δ materials has been investigated in the temperature range 800°–1000°C and in the stress range 2.5–25 MPa. The absolute densities of the strontium-deficient and strontium-excess materials are 4.99 and 5.25 g/cm³, respectively, which corresponds to porosities of ∼2% and 5%, respectively. Both materials contain secondary phases because of the cation nonstoichiometry. The creep rate is faster for the strontium-deficient material than the strontium-excess material. The stress exponent is approximately unity, and the activation energy is 260± 30 kJ/mol for both materials. The results can be explained by a cation diffusion mechanism. The present findings are discussed in relation to previous sintering data and the possible application of these materials as oxygen-permeable membranes.     

Morphologically dependent alternating‐current and direct‐current breakdown strength in silica–polypropylene nanocomposites

In this article, we report the synthesis of a new bimodal surface ligand morphology on silica nanoparticles. Combining grafting‐to and grafting‐from approaches, in this study, we demonstrated the efficacy of anthracene surface modification for improving the dielectric breakdown strength (DBS) under alternating‐current and direct‐current conditions and that of a matrix‐compatible polymer brush for controlling the nanofiller (NF) dispersion. Ligand‐modified spherical colloidal SiO₂ nanoparticles (～14 nm in diameter) were mixed into polypropylene, and the resulting dispersion was improved over the unmodified particles, as shown with transmission electron microscopy. The results suggest that the electronic structure of the anthracene‐modified particle surface was critical to the improvement in DBS. In addition, the DBS of the composite was shown to depend on the dispersion state of the filler and the mode of stress; this indicated that the individually dispersed nanoparticles were not necessarily the optimal morphology for all stress conditions. Additionally, the precise nature of the matrix‐compatible brush was less important than the NF dispersion it produced. The bimodal grafted architectural design has provided a promising solution for the control of the dispersion and surface properties, especially for high‐molecular‐weight polymer matrices. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44347.