Influence of post‐treatments on the properties of porous poly(vinyl alcohol) membranes

Porous poly(vinyl alcohol) (PVA) membranes were prepared by a phase‐inversion method. The influence of chemical crosslinking and heat treatments on the swelling degree, resistance to compaction, mechanical strength, and morphology of porous PVA membranes was extensively studied. The crosslinking degree and crystallinity of the membranes, calculated from IR spectra, increased with the treatment time. The porosity, calculated on the basis of swelling experiments, showed a decreasing trend for heat‐treated membranes but remained almost at a constant value for crosslinked membranes. Such a change was further proved with scanning electron microscopy pictures. The behavior was explained by the rearrangement of PVA chains during the heat‐treatment process, which led to morphological changes in the membranes. The mechanical properties of the porous membranes in dry and wet states were measured, and a great difference was observed between crosslinked and heat‐treated membranes in the dry and wet states. The crosslinked membranes showed good mechanical properties in the dry state but became fragile in the wet state. On the contrary, the heat‐treated membranes were more flexible in the wet state than in the dry state. This change was explained by the turnaround of inner stress in the systems during the swelling process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Structure and processability of iodinated poly(vinyl alcohol). IV. Drawability of the films iodinated at solution before casting

The drawability of iodinated at solution before casting (IBC) polyvinyl alcohol films prepared by casting aqueous solutions of 10 wt % PVA containing 15.2, 39.8, 83.2, 117.0, and 140.1% was examined with a tensile tester at 20–60°C. The tensile behavior of IBC films showed that the yield and breaking loads were much lower, and the breaking elongation was even higher than those of the unoriented iodinated after casting (IAC) films as well as the untreated PVA films. The maximum draw ratios of the films with the weight gain of 15.2, 39.8, 83.2, 117, and 140.1% were 4.5, 5.5, 8.5, 8.0, and 7.5, respectively, which were achieved at 20°C in all. The crystallinity of all films increased by the maximum draw, regardless of crystallinity before drawing. The crystalline structure was recovered to the original PVA crystalline lattice by deiodination. Amorphous orientation and initial moduli increased with the maximum draw ratio, while the orientation of crystals was constant. The orientation and moduli increased up to the weight gain of 83.2%, whose highest draw ratio and initial modulus were 8.5 and of 7.1 GPa, respectively, and then decreased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

The effect of ionic interaction on the miscibility and crystallization behaviors of poly(ethylene glycol)/poly(L‐lactic acid) blends

The effect of end groups (2NH₂) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(L ‐lactic acid) (PLLA) were investigated. The results of conductivity meter and dielectric analyzer (DEA) implied the existence of ions, which could be explained by the amine groups of PEG gaining the protons from the carboxylic acid groups of PLLA. The miscibility of PEG(2NH₂)/PLLA blends was the best because of the ionic interaction as compared with PEG(2OH, 1OH‐1CH₃, and 2CH₃)/PLLA blends. Since the ionic interaction formed only at the chain ends of PEG(2NH₂) and PLLA, unlike hydrogen bonds forming at various sites along the chains in the other PEG/PLLA blend systems, the folding of PLLA blended with PEG(2NH₂) was affected in a different manner. Thus the fold surface free energy played an important role on the crystallization rate of PLLA for the PEG(2NH₂)/PLLA blend system. PLLA had the least fold surface free energy and the fast crystallization rate in the PEG(2NH₂)/PLLA blend system, among all the PEG/PLLA systems studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Windows XP操作系统的应用技巧

介绍了Windows XP操作系统中一些应用技巧,对提高计算机的整体运行速度和工作稳定性有很大帮助.     

New Additive Watermark Detectors Based On A Hierarchical Spatially Adaptive Image Model

In this paper, we propose a new family of watermark detectors for additive watermarks in digital images. These detectors are based on a recently proposed hierarchical, two-level image model, which was found to be beneficial for image recovery problems. The top level of this model is defined to exploit the spatially varying local statistics of the image, while the bottom level is used to characterize the image variations along two principal directions. Based on this model, we derive a class of detectors for the additive watermark detection problem, which include a generalized likelihood ratio, Bayesian, and Rao test detectors. We also propose methods to estimate the necessary parameters for these detectors. Our numerical experiments demonstrate that these new detectors can lead to superior performance to several state-of-the-art detectors.     

Comparative study of self-assembling of multilayers using reactive sputter deposition and mass selective ion beam deposition

While experimenting with the growth of metal-containing amorphous carbon (a-c:Me) thin films using two different growth processes, self-assembled multilayered structures were observed. One of the processes is a reactive magnetron sputter deposition process. The other process is a mass selective ion beam deposition process. Despite of the differences in the growth method and the growth condition, self-assembled multilayered thin films, consisting of alternating dark layer and bright layer, were obtained in both processes. Based on the consideration of energy for atomic diffusion in the thin films, the growth mechanism is discussed.     

我国上市公司财务治理存在的问题及对策研究

针对目前我国上市公司财务治理的不良现状,提出了优化股权结构,引进多元化投资者,强化监事会的独立监督权等完善措施.     

垂直上引连续铸造铸铁管及其应用

介绍了垂直上引连续铸造铸铁管的工艺特点及生产的铸铁管型材的显微组织和力学性能.该法生产的铸铁管与砂铸法生产的铸铁管相比,石墨球化率高,形态好;力学性能明显提高.该铸铁管产品具有管径细、管壁薄、耐磨性高的特点.