Stability of rare‐earth‐doped spherical yttria‐stabilized zirconia synthesized by ultrasonic spray pyrolysis

Phase stability is one of the crucial requirements for any material that can be used at elevated temperature applications such as thermal barrier coating (TBC). The most traditional TBC material, partially stabilized zirconia, limits the operating temperature due to its phase transformation. Conversely, the low thermal conductivity of fully stabilized zirconia (YSZ) may enable effective reduction in the surface temperature on the coated component, while avoiding deleterious phase transitions, although still being subjected to sintering and grain growth. It has been reported that addition of rare‐earths as dopants to YSZ can significantly increase resistance to grain growth at high temperature. Keeping this under consideration, this work investigates the role of rare‐earths (lanthanum and gadolinium) in increasing thermal stability of YSZ microspheres, the building blocks for high‐temperature photonics for reflective TBC. The spheres were produced by ultrasonic spray pyrolysis, and the doping led to significant improvement of stability by significant inhibition of grain growth. While the individual dopants showed significant growth and sintering inhibition up to 900°C, co‐doping with 4% (in mol) of each (Gd and La) led to coarsening resistance up to 1000°C for 3 hours, when particles retained reasonable spherical features with nanometric crystallite sizes.     

Potential and Limitations of Natural Chabazite for Selective Catalytic Reduction of NOx with NH3

The potential of the natural chabazite for the selective catalytic reduction (SCR) of NOx with NH₃ is evaluated in the present work. Activity tests were performed under technically relevant reaction and temperature conditions for the fresh and hydrothermally aged catalysts. The natural chabazite before and after alkaline removal as well as after iron and copper addition were compared. The structural as well as surface and bulk properties were elucidated by a variety of complementary characterization techniques, i.e. XRD, XPS, EPR, BET, NH₃‐TPD, ex situ and in situ XAS. The results indicate that an important facet for using the natural chabazite for the standard and fast SCR reactions is the removal of alkaline metals, which at the same time also leads to a partial change of the structure and the size of the iron‐containing particles. The performance and especially the hydrothermal stability can be further improved by copper addition.     

Lipoxygenase Products in the Urine Correlate with Renal Function and Body Temperature but not with Acute Transplant Rejection

Acute transplant rejection is the leading cause of graft loss in the first months after kidney transplantation. Lipoxygenase products mediate pro- and anti-inflammatory actions and thus we aimed to correlate the histological reports of renal transplant biopsies with urinary lipoxygenase products concentrations to evaluate their role as a diagnostic marker. This study included a total of 34 kidney transplant recipients: 17 with an acute transplant rejection and 17 controls. LTE4, LTB4, 12-HETE and 15-HETE concentrations were measured by enzyme immunoassay. Urinary lipoxygenase product concentrations were not significantly changed during an acute allograft rejection. Nevertheless, LTB4 concentrations correlated significantly with the body temperature (P ≤ 0.05) 3 months after transplantation, and 12- and 15-HETE concentrations correlated significantly with renal function (P ≤ 0.05) 2 weeks after transplantation. In conclusion, our data show a correlation for LTB4 with the body temperature 3 months after transplantation and urinary 12- and 15-HETE concentrations correlate positively with elevated serum creatinine concentrations but do not predict acute allograft rejection.     

Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites

Over the past 40 years, development of Ceramic Matrix Composites (CMCs) has focused mainly on the improvement of material performance and optimization of cost-efficient production routes. Recently, more fields of application have opened up for CMCs, in which environmental impacts are relevant. These impacts have barely been investigated so far but receive growing interest due to increasing awareness of the environmental consequences. Our innovative approach frames material properties in relation to environmental impacts (e.g., global warming potential in CO₂ emission) by varying process parameters to balance optimum performance against environmental considerations. First, the process of wet filament winding has been investigated up to the Carbon Fiber Reinforced Plastic (CFRP) state by changing both the curing and tempering temperatures. During the production of CFRP plates, mass and energy flows were tracked in each step. Three point-bending and interlaminar shear tests have been performed on the resulting samples to identify basic mechanical properties. The environmental impacts are determined by a cradle-to-gate Life Cycle Assessment (LCA), using the software SimaPro. The resulting tradeoffs between mechanical properties and environmental impacts show nonlinear behavior, thus revealing optimum points above which improved mechanical properties are associated with significantly higher CO₂ emissions.     

Versuchsplanerische Untersuchung der Umesterung von Sojaöl mit Ethanol im Mikroreaktor

Base‐catalyzed transesterification of fats and oils with primary alcohols in discontinuous operation is an established batch process for the biodiesel production. However, the application of microreaction technology and continuous flow process lead to an increase of process intensification. The ethanol/soy bean oil ratio at low flow rates as well as the reactor geometry have the most evident effects on the fatty acid ethyl ester yield of KOH‐catalyzed ethanolysis of soy bean oil in microreactors. The influence of the catalyst concentration is of a lower importance.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

N-methyl-2-hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

The aim of the present study is to evaluate the performance of N-methyl-2-hydroxyethylammonium oleate ([m-2HEA][Ol]) as a corrosion inhibitor for mild steel in a 0.1-mol/L hydrochloric acid solution and also investigate the role of chloride in the inhibition mechanism. This protic ionic liquid (PIL) has formerly shown a high efficiency as a corrosion inhibitor in a neutral chloride medium. Electrochemical and weight loss measurements, surface contact angle determination, scanning electron microscopy, and Raman spectroscopy were used to understand the factors that influence the response of the studied inhibitor. Results revealed that [m-2HEA][Ol] behaves as a mixed-type adsorption inhibitor, by blocking cathodic sites and by modifying the activation energy of the anodic reaction, and it can reach up to 94–97% of inhibition efficiency. PIL adsorption was enhanced by the excess of positive charge of the mild steel. The effect of inhibitor molecule has been discussed to propose a mechanism that explains the inhibitory action of the corrosion inhibitor, pointing out the role of chloride in the inhibition mechanism.