Bottom-contact small-molecule n-type organic field effect transistors achieved via simultaneous modification of electrode and dielectric surfaces

Low-voltage, n-type organic field effect transistors (OFETs) with simultaneously modified bottom-contact (BC) electrodes and dielectric were compared to their top-contact (TC) counterparts. The devices modified with 6-phenoxyhexylphosphonic acid (Ph6PA) self-assembled monolayer (SAM) showed similar performance, morphology, and contact resistance. Electron mobility of C₆₀ devices were 0.212 and 0.320 cm² V⁻¹ s⁻¹ and [6,6]-phenyl-C₆₁-butyric acid methyl ester (PCBM) devices were 0.04 and 0.06 cm² V⁻¹ s⁻¹ for TC and BC devices, respectively. Low contact resistance between 11 and 45 kΩ cm was found regardless of device architecture or n-type semiconductor used. This work shows it is possible to fabricate solution processable low-voltage bottom-contact devices with performance that is similar or better than their top-contact counterparts without the addition of complex and time-consuming processing steps.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

Modeling subjectively perceived annoyance of H.264/AVC video as a function of perceived artifact strength

This paper is concerned with the subjective perception of video coding artifacts in H.264/AVC encoded and decoded video. Our objective is to model the perceived annoyance of such low bit rate video sequences as a function of perceived artifact strength. We introduce a new method for determining this function and apply it to the data from two psychophysical experiments. Both experiments produced numerical judgments of the subjectively perceived annoyance of artifact combinations and the perceived strength of the respective coding artifacts. Our method produces a discrete multi-dimensional representation of the relationships in the data from which the function relating annoyance to artifact strength is derived. The method is applied to the data of the first experiment and the resulting function is shown to describe the data from the second experiment as well.     

Ferroelectric Poling of Methylammonium Lead Iodide Thin Films

Seemingly contradictory reports on polar domains and their origin have surrounded the controversial discussion about the ferroelectricity of the methyl ammonium lead iodide (MAPbI₃) thin films that are commonly employed in perovskite solar cells. In this work, microscopic modulations of the polar domain patterns upon application of an electric poling field are correlated with macroscopic changes to the currents through the MAPbI₃ layer. Piezoresponse force microscopy is used to monitor the widening, narrowing, generation or extinction of polar domains, as well as shifts of the domain walls at room temperature under an in‐plane electric poling field that is applied between two laterally organized electrodes. This poling leads to a net polarization of individual grains and the thin film itself. Macroscopically, this net polarization results in a persistent shift of the diode characteristics that is measured across the channel between the electrodes. Both the modulation of the polar domains upon electric poling and the concurrent persistent shift of the electric currents through the device are the unambiguous hallmarks of ferroelectricity, which demonstrate that MAPbI₃ is a ferroelectric semiconductor.     

MRI-compatible intensity-modulated force sensor for cardiac catheterization procedures

This paper presents a novel, magnetic resonance imaging (MRI)-compatible, force sensor suitable for cardiac catheterization procedures. The miniature, fiber-optic sensor is integrated with the tip of a catheter to allow the detection of interaction forces with the cardiac walls. The optical fiber light intensity is modulated when a force acting at the catheter tip deforms an elastic element, which, in turn, varies the distance between a reflector and the optical fiber. The tip sensor has an external diameter of 9 Fr (3?mm) and can be used during cardiac catheterization procedures. The sensor is able to measure forces in the range of 0-0.85?N, with relatively small hysteresis. A nonlinear method for calibration is used and real-time MRI in vivo experiments are carried out, to prove the feasibility of this low-cost sensor, enabling the detection of catheter-tip contact forces under dynamic conditions.     

Arrhenius average temperature: the effective temperature for non-fatigue wearout and long term reliability in variable thermal conditions and climates

This paper presents a method of assessing the effective temperature essential for predicting the temperature acceleration of the wearout mechanisms (other than thermal fatigue) of electronic equipment. This is particularly important for equipment experiencing variable thermal conditions. The approach, based on weighting of thermal acceleration factors, leads to the Arrhenius average temperature T/sub eff/ given by (4). T/sub eff/ is related to wearout processes and allows one to compare predictions from the thermal design to results of accelerated testing. It has no relation to the maximum component temperature which influences functionality. The method is applicable to outside plant telecommunication equipment as well as in the automotive and aerospace industries. The effect of climate and design constraints on T/sub eff/ are discussed.     

Charge transfer in thin films of donor–acceptor complexes studied by infrared spectroscopy

The degree of charge transfer in thin films of organic charge transfer (CT)-complexes, which are deposited via thermal evaporation, is examined via infrared-spectroscopy. We demonstrate a linear relationship between the shift in the excitation energy of the CN-stretching mode of CT-complexes with the acceptor 7,7,8,8-tetracyanoquinodimethane (TCNQ) and the charge transfer. The measured correlation corresponds very well with DFT calculations. For Na-TCNQ we observe a splitting in the peak of the CN-stretching mode, which can be explained by the coupling of two modes and was confirmed by the calculations. In CT-complexes with partial charge transfer the appearance of an electronic excitation is demonstrated.     

Superoleophilic Magnetic Iron Oxide Nanoparticles for Effective Hydrocarbon Removal from Water

Various hydrocarbons are efficiently extracted from water by using a new sorbent material based on covalently functionalized magnetic nanoparticles. The functionalization of the magnetite nanoparticles with a self‐assembled monolayer of hexadecylphosphonic acid renders the nanoparticles oleophilic and the magnetic nature of magnetite allows for simple extraction of the hydrocarbon‐soaked sorbent. The sorbent material is capable of extracting single contaminants such as alkanes and aromatics and complex hydrocarbon mixtures such as crude oils in high extraction rates of up to 14 times the sorbent volume. Experimental results are explained by molecular dynamics simulations on the adsorption of single components from a hydrocarbon‐water mixture to the alkylphosphonic acid layer on the nanoparticles. The core–shell sorbent material is highly stable and therefore, reusable over several successive extraction cycles without degradation. The extraction performance is determined at different water temperatures, different water sources, and different magnetic core materials and evaluated compared to heptadecanoic acid functionalized magnetite. The new sorbent material provides the opportunity for an efficient, reliable, inexpensive, and environmental friendly removal of hydrocarbons from water.     

Statistical modeling of reliability in logic devices

Due to continuous technology scaling VLSI circuits feature an increasing susceptibility to transient faults. While complete elimination of errors cannot be guaranteed, current mitigation techniques based on circuit improvement or architectural measures cause a large overhead in terms of area and energy consumption. A more efficient possibility to cope with transient faults can be to tolerate hardware errors at low physical levels and handle them at higher system levels. This can be achieved by reusing error handling capabilities – such as channel decoders – or introducing specialized error correction blocks that take advantage of the system characteristics by concentrating the effort on the components and bits most crucial for system operation. To enable this approach the influence of hardware errors on system performance needs to be evaluated, requiring spatial and temporal models of error propagation in the system. Since Monte Carlo simulation of complex systems is not feasible, a statistical modeling technique of logic gates and circuits is introduced. This approach allows modeling of noise and variability influences on logic gates as well as correlation due to reconvergent fan-out with an error of 5% compared to Monte Carlo simulation but with considerably less runtime.