Modularity in small machine tools

Up to now, machine tools in micro production hardly feature modularity and hence offer only few opportunities to reconfigure or individualize a manufacturing process. This article gives a summary of concepts, how modularity in small micro machine tools can be designed and implemented. A size-adaptable machine frame is the basis for various possible process layouts. Adapters, a feed module with replaceable drive and kinematics, equipped with appropriate interfaces as well as a supply concept are introduced to allow further configuration. The combination of those concepts characterizes a small modular machine tool system. Technical solutions and fully functional prototypes will be shown and discussed in the following paper.     

IFMIF test cell design: Current status and key components

The IFMIF (International Fusion Material Irradiation Facility) test cell design has been further developed and optimized based on the existing modular test cell concept. Key features of the current test cell include actively cooled surrounding shielding walls with coverage of internal surfaces with stainless steel liner, independent two layer top shielding plugs for protecting the access cell from neutron and gamma radiation from the test cell, optimized piping and cabling plugs for accommodating pipe and cable penetrations and for minimizing neutron streaming, rearranged lithium quench tank to outside of the test cell, etc. According to preliminary neutronic calculation results, limited access to the quench tank area for maintenance after beam shut-off can be expected with the current arrangement. Maintenance of the lithium inlet and outlet pipes as well as the two beam ducts are also possible by introducing removable shielding plugs which can be removed and replaced in case of failure.     

Role of cation exchange processes on the sorption influenced transport of cationic β-blockers in aquifer sediments

The influence of cation exchange processes on the transport behavior of the cationic β-blockers atenolol and metoprolol was investigated by applying saturated laboratory column experiments. Breakthrough curves using natural sediments under different competitive conditions were generated and resulting sorption coefficients were compared. For the cationic species of atenolol (at pH = 8), the existence and dominating role of cation exchange processes were demonstrated by varying calcium concentrations. No effect of atenolol concentration on its retardation was observed within a wide concentration range. The breakthrough curve comparison of atenolol and the more hydrophobic metoprolol under constant conditions showed a significantly stronger retardation for metoprolol than for atenolol. However, additional non-polar interactions cannot explain the observed differences as they are determined to be negligible for both compounds. Due to the dominating role of cation exchange processes for the cationic species on overall sorption, a simple prediction of β-blocker transport in the subsurface by using K_OC values derived from log K_OW-log K_OC correlations is not feasible.     

Caffeine as an indicator for the quantification of untreated wastewater in karst systems

Contamination from untreated wastewater leakage and related bacterial contamination poses a threat to drinking water quality. However, a quantification of the magnitude of leakage is difficult. The objective of this work is to provide a highly sensitive methodology for the estimation of the mass of untreated wastewater entering karst aquifers with rapid recharge. For this purpose a balance approach is adapted. It is based on the mass flow of caffeine in spring water, the load of caffeine in untreated wastewater and the daily water consumption per person in a spring catchment area. Caffeine is a source-specific indicator for wastewater, consumed and discharged in quantities allowing detection in a karst spring. The methodology was applied to estimate the amount of leaking and infiltrating wastewater to a well investigated karst aquifer on a daily basis. The calculated mean volume of untreated wastewater entering the aquifer was found to be 2.2 ± 0.5 m³ d⁻¹ (undiluted wastewater). It corresponds to approximately 0.4% of the total amount of wastewater within the spring catchment.     

Power consumption benchmarking for reconfigurable platforms

Software defined radios (SDR) wideband mobile terminals must be capable of data processing while consuming low power and keeping the design and manufacturing costs as low as possible. SDR can combine high performance signal processing and flexibility, but power efficiency of SDR nodes is an issue that needs to be addressed. Analysis of power consumption for various target technologies is challenging, since each technology typically contains its own benchmarking tools and thus, results are not comparable. In this paper, we illustrate how the GroundHog2009 benchmark suite, designed to be platform independent, can be used to evaluate power dissipation of four modern FPGAs and one microcontroller. We also introduce a generic RTL library for the GroundHog2009 design cases and test bench infra-structure to make the toolset usage easy. In addition, we show that power can be saved by using clock management, available on one of the FGPA-boards. The power savings range from 38 to 1,150?%.     

World‐record Cu(In,Ga)Se2‐based thin‐film sub‐module with 17.4% efficiency

We report a new certified world‐record efficiency for thin‐film Cu(In,Ga)Se₂‐based photovoltaic sub‐modules of 17.4% (aperture area). The record efficiency of the 16 cm², monolithically integrated, sub‐module has been independently confirmed by Fraunhofer ISE. The record device is the result of extensive co‐optimization of all processing steps. During the optimization process, strong focus has been put on the scalability of processes to cost‐effective mass production, as reflected, for example, in Cu(In,Ga)Se₂ deposition time and substrate temperature. Device manufacturing as well as results of electrical and material characterization is discussed. Copyright © 2012 John Wiley & Sons, Ltd.     

Spin cast self-assembled monolayer field effect transistors

Top-contact self-assembled monolayer field-effect transistors (SAMFETs) were fabricated through both spin-coating and solution assembly of a semiconducting phosphonic acid-based molecule (11-(5?-butyl-[2,2′;5′,2″;5″,2?;5?,2?]quinquethiophen-5-yl)undecylphosphonic acid) (BQT-PA). The field-effect mobilities of both spin-cast and solution assembled SAMFETs were 1.1-8.0 × 10⁻⁶ cm² V⁻¹ s⁻¹ for a wide range of channel lengths (between 12 and 80 μm). The molecular monolayers were characterized by atomic force microscopy (AFM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the BQT-PA monolayer films exhibit dense surface coverage, bidentate binding, and tilt angles of ∼32° and ∼44° for the thiophene rings and alkyl chain, respectively. These results indicate that rapid throughput of fabricating SAMFETs is possible even by spin-coating.