GaAs varactor diode for u.h.f. t.v. tuners

The design and fabrication of a GaAs varactor diode for u.h.f. t.v. tuners were carried out using a GaAs double epitaxial layer. The capacitance ratio of diode. C3/C25, is 6.0 and the series resistance at 470 MHz is 0.24 ?. These characteristics are much better than those of an Si diode and well satisfy the requirements for t.v. tuners.     

Comparison of Antifungal and Antioxidant Activities of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">A. auriculiformis</Emphasis> Heartwood Extracts

The effect of heartwood extracts from Acacia mangium (heartrot-susceptible) and A. auriculiformis (heartrot-resistant) was examined on the growth of wood rotting fungi with in vitro assays. A. auriculiformis heartwood extracts had higher antifungal activity than A. mangium. The compounds 3,4,7,8-tetrahydroxyflavanone and teracacidin (the most abundant flavonoids in both species) showed antifungal activity. A. auriculiformis contained higher levels of these flavonoids (3.5- and 43-fold higher, respectively) than A. mangium. This suggests that higher levels of these compounds may contribute to heartrot resistance. Furthermore, both flavonoids had strong 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and laccase inhibition. This suggests that the antifungal mechanism of these compounds may involve inhibition of fungal growth by quenching of free radicals produced by the extracellular fungal enzyme laccase.     

High pressure synthesis of cubic boron nitride from amorphous state

Cubic-zincblende-type boron nitride was synthesized from amorphous state at pressures higher than 6 GPa and at temperatures higher than 800°C, without any planned addition of catalysts. Also, wurtzite type boron nitride was formed although the amount was small.     

Development of Molecular Sieves‐Supported Palladium Catalyst and Chemoselective Hydrogenation of Unsaturated Bonds in the Presence of Nitro Groups

The chemoselective hydrogenation of unsaturated bonds and azide functionalities is achieved in the presence of nitro groups by a heterogeneous palladium catalyst supported on molecular sieves (MS3A). The present method shows a wide‐range of applicability with regard to substrates and the catalyst can be easily prepared and reused at least three times without any loss of activity.     

Analysis of glycosyl bond cleavage and related isotope effects in collision-induced dissociation quadrupole-time-of-flight mass spectrometry of isomeric trehaloses

The configuration isomers alpha,alpha-, alpha,beta-, and beta,beta-trehalose are distinguishable by a relative ion abundance analysis using collision-induced dissociation MS/MS measurements in electrospray ionization quadrupole-time-of-flight mass spectrometry. The relative abundance of the Y-type fragment ion of alpha,alpha-trehalose is the highest and that of beta,beta-trehalose is the lowest, indicating that alpha-glycosyl bonds cleave more easily than beta-glycosyl bonds. The relative ion abundance depends on both the alpha- and beta-glycosyl linkage type and the number of alpha-glycosyl bonds. The reaction path of glycosyl bond cleavage is calculated computationally using the molecular orbital method in the form of Hartree-Fock theory in conjunction with the 6-31G(d) basis set. The results are consistent with the experimental data. Isotope effects on the fragmentation of the glycosyl bonds are detected in the experiments of the H2O/D2O solvent systems. Furthermore, the isotope effect regarding beta,beta-trehalose is larger than those of alpha,alpha- and alpha,beta-trehalose, indicating that the isotope effect on the beta-glycosyl bond cleavage is larger than that on the alpha-glycosyl bond cleavage. The thermal energy increase in trehalose-d8 molecules over the corresponding trehalose molecules is calculated from the vibrational modes.     

Thermal degradation characteristics of oil‐filled cable joint with extremely degraded tan δ oil

Much of oil‐filled (OF) cable has been used for a long time as 66‐ to 500‐kV extrahigh‐voltage cable. Sometimes we can see extremely degraded tan δ oil (several tens of percent of tan δ, for example) in joint boxes, etc. The values of tan δ calculated by a simple combination model of paper/oil show that the oil‐impregnated paper with such a high tan δ oil likewise has an extremely high tan δ, which must result in thermal breakdown. However, such an event has not taken place up to the present in actually operated transmission lines. This fact suggests that some mechanism for the suppression of tan δ has acted in the paper insulation impregnated with degraded tan δ oil. Therefore, we investigated in detail the tan δ characteristics of paper impregnated with extremely high tan δ oil. In addition, based on the investigation results, we developed a method for simulation of heat generation by dielectric loss in an OF cable joint (which has degraded tan δ oil). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(1): 1–10, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21184     

A New Hybrid Phosphine Ligand for Palladium‐Catalyzed Amination of Aryl Halides

A new hybrid phosphine was designed. The phosphine combines two common structural characteristics found among the effective phosphine ligands reported recently, namely, three tert‐alkyl substituents binding to the phosphorus and an aryl group at an appropriate position. A hybrid phospine/palladium system is versatile and effective for the coupling reaction of various aryl halides with primary and secondary amines including carbazole.     

Effect of texture on oxidation resistance of Ti3AlC2

Oxidation resistance of textured Ti₃AlC₂ ceramics was measured in the temperature range 1273–1573?K. It was found that the oxidation was markedly anisotropic and the samples exhibited a better oxidation resistance when tested along a direction transverse to the c-axis. This behavior was attributed to the rapid diffusion of Al within its basal planes to form a passivating Al₂O₃ scale and it respected Ellingham diagrams. The scales formed had different compositions depending on the testing direction; this response was clearly resulting from the crystallographic orientation. Even at 1473?K after 20?h exposure, the samples tested in a direction transverse to the c-axis showed a reduced weight gain which was 45 times lower than one seen on a basal plane.     

Development of measuring system for radial non-repetitive run-out (NRRO) and perception about present state of angular contact ball bearing for machine tools

This paper deals with the non-repetitive run-out (NRRO) of an angular contact ball bearing for machine tools. First, a measuring system for the rotational accuracy of the bearing was developed. Then, the following results were obtained using the developed measuring system.

(1)

The NRRO of ball cage rotation increased with rotational speed.

(2)

The influence of form errors in the inner and outer rings on NRRO was small.

(3)

The influences of form errors in the balls of the bearing and the diameter difference of balls on NRRO were significant.

     

Fabrication of lead-free piezoelectric (Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ceramics using electrophoretic deposition

Electrophoretic deposition (EPD) process has certain advantages such as it can be applied for a mass production and also can be combined with magnetic crystal alignment technique. In this work, we prepared lead-free 85(Bi_0.5Na_0.5)TiO₃–15BaTiO₃ (85BNT–15BT) piezoelectric ceramics by conventional uniaxial pressing and EPD process. Various conditions were optimized such as suspension media, applied electrical field, and deposition time in order to yield dense green ceramics of 85BNT–15BT composition using EPD process. 85BNT–15BT ceramics prepared using EPD process revealed the Curie temperature of about 250 °C, coercive field of about 30 kV/cm, and piezoelectric constant (d ₃₃) of 75 pC/N. The EPD-processed samples exhibited structural and electrical properties similar to that of the conventionally processed one suggesting the successful fabrication of 85BNT–15BT piezoelectric ceramics by EPD method without composition deviation. This study lays a foundation on the fabrication of Bi-based lead-free piezoelectric ceramics by an alternative route other than the conventionally practiced solid-state reaction method maintaining the similar chemical composition, moreover, leaving a large space to explore more in the future.