Preparation of rod-shaped BaTiO3 powder

Rod-shaped BaTiO₃ powder particles have been prepared from rod-shaped TiO₂ ·nH₂O and BaCO₃ in molten chloride. The morphology of BaTiO₃ particles was studied referring to the effects of the chemical species of the starting titanium compound, amount of chloride, particle size of the titanium compound and reaction conditions, and the preparation condition of rod-shaped BaTiO₃ has been determined: i.e., large TiO₂ ·nH₂O particles were heated at 700°C in molten salt with an equal amount of BaTiO₃. This condition was effective in suppressing the formation of BaTiO₃ by a solution-precipitation process as well as the deformation of either TiO₂ ·nH₂O or BaTiO₃, which are responsible for the formation of equiaxed BaTiO₃ particles. The obtained rod-shaped BaTiO₃ particles had a cubic symmetry. Electron diffraction analysis showed that the following topotactic relation is retained; 0 1 0_{potassium tetratitanate} 0 1 0_{hydrated titania} 1 0 0_anatase 1 0 0_{barium titanate}     

Modified quadratic discriminant functions and the application to chinese character recognition

Issues in the quadratic discriminant functions (QDF) are discussed and two types of modified quadratic disriminant functions (MQDF1, MQDF2) which are less sensitive to the estimation error of the covariance matrices are proposed. The MQDF1 is a function which employs a kind of a (pseudo) Bayesian estimate of the covariance matrix instead of the maximum likelihood estimate ordinarily used in the QDF. The MQDF2 is a variation of the MQDF1 to save the required computation time and storage. Two discriminant functions were applied to Chinese character recognition to evaluate their effectiveness, and remarkable improvement was observed in their performance.     

Morphology and preferred orientation of Y2O3 film prepared by high-speed laser CVD

Yttria (Y₂O₃) films were prepared at high deposition rates of up to 83 nm/s (300 μm/h) by laser chemical vapor deposition (LCVD) using an Y(dpm)₃ precursor. The effects of deposition conditions, mainly total gas pressure and laser power, on morphology, deposition rate and preferred orientation were studied. Plasma was produced around the substrate over a critical laser power resulting in significant increases in deposition temperature and deposition rate. The high deposition rate (300 μm/h) by LCVD was about 100 to 1000 times as high as those by conventional CVD. The morphology of Y₂O₃ films changed from faceted and columnar structures with high (400) orientation to a columnar structure with high (440) orientation, and finally to a cone-like structure with moderate (440) orientation with increasing total gas pressure (P_tot).     

A novel spin-finishing method for antistatic modification of polyester fiber. Surface reaction onto amine-containing copoly(amide-ethers) blended with polyester fiber

Copoly(amide-ethers) containing two types of tertiary amine units were made as antistatic modifiers for poly(ethylene terephthalate) (PET) fibers. The filaments of the copolymers were melt-spun and reacted with three alkylating agents in order to quaternize the tertiary amine into a sulfo-betaine, a carbobetaine, and an ammonium ion. The apparent electric resistivity of the filaments was greatly reduced by this reaction, being in the range of 10⁶ to 10⁸ Ω/cm. However, because these quaternized copolymers incurred decomposition during blend spinning with PET, a blend PET fiber containing one type of copoly(amide-ether) was melt-spun and subjected to quaternization of the amino groups as well as to surface crosslinking with various alkylating and epoxy agents. The quaternized blend fibers obtained showed improved antistatic properties compared with the original blend fiber. Particularly, the fibers crosslinked with epoxy compounds were found to have the best antistatic properties that had ever been attained with this type of modification. The antistatic properties were retained even after dyeing, because both hydrophilic and ionic groups had been effectively immobilized on the surface. Since this quaternization and crosslinking could be conducted on-line with spinning and drawing within a short reaction time, this modification technique is called “spin-finishing method”, which should be superior to the conventional methods in terms of cost performance and productivity.     

Crystallographic Texture Development in Bismuth Sodium Titanate Prepared by Reactive-Templated Grain Growth Method

Bi_0.5Na_0.5TiO₃ (BNT) and 0.94Bi_0.5Na_0.5TiO₃·0.06BaTiO₃ (BNT–BT) bulk ceramics with extensive 〈100〉 texture were prepared by the reactive-templated grain growth method, using platelike Bi₄Ti₃O₁₂ (BIT) particles as templates for BNT. Calcined compacts were composed of matrix grains with random orientation and 〈100〉-oriented grains transformed from aligned BIT particles, and the texture developed by the growth of oriented grains during sintering. Ceramics with extensive texture were obtained by using the starting mixture containing the maximum concentration of platelike BIT to form the maximum volume fraction of oriented grains.     

Effect of green compact structure on the sintering of alumina

The effect of particle agglomeration on sintering has been studied by slipcasting suspensions with pH values ranging from 2 to 11. The rate of densification has been found to depend on the degree of agglomeration. Complete dispersion of alumina primary particles has not been attained through adjustment of pH of suspensions, and agglomerates also remained in the best-dispersed suspension. Elimination of the agglomerates by sedimentation lowered the densification temperature of slip-cast compacts. The grain size-density curve is a function of temperature. High-density and small-grained sintered bodies were obtained by low-temperature long-time firing.     

Application of silica-containing nano-composite emulsion to wall paint: A new environmentally safe paint of high performance

A new emulsion-type paint was prepared by utilizing a nano-composite emulsion (NCE), which contained nano-size particles (ca. 60 nm in diameter) consisting of silica (inorganic core, ca. 30 nm in diameter) and polyacrylate (organic shell), and evaluated as wall paint. By applying NCE for the wall paint, about 35 wt.% of the organic content in the paint could be reduced in comparison with the commodity emulsion-type paint, which is highly effective to save the petroleum resources. The basic properties of the white NCE paint film on gloss, surface hardness, adhesion, and solvent resistance were evaluated and compared with those of acrylic emulsion-type paints as well as those of silica-containing paints which were prepared simply by blending the acrylic emulsion with silica sol. The NCE paint was especially excellent in solvent resistance. Then the practical tests were performed to evaluate its appropriateness as wall paint, which clarified the excellent antipollution property and the high flame resistance of the NCE paint.     

A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

Expectation-maximization algorithms for inference in Dirichlet processes mixture

Mixture models are ubiquitous in applied science. In many real-world applications, the number of mixture components needs to be estimated from the data. A popular approach consists of using information criteria to perform model selection. Another approach which has become very popular over the past few years consists of using Dirichlet processes mixture (DPM) models. Both approaches are computationally intensive. The use of information criteria requires computing the maximum likelihood parameter estimates for each candidate model whereas DPM are usually trained using Markov chain Monte Carlo (MCMC) or variational Bayes (VB) methods. We propose here original batch and recursive expectation-maximization algorithms to estimate the parameters of DPM. The performance of our algorithms is demonstrated on several applications including image segmentation and image classification tasks. Our algorithms are computationally much more efficient than MCMC and VB and outperform VB on an example.     

Disposition of diadenosine 5',5"'-P1,P4-tetraphosphate (Ap4A) in rats

The disposition of diadenosine 5'5"'-P1,P4-tetraphosphate (Ap4A), an endogenous dinucleotide, was investigated in rats. The degradation of Ap4A in rat plasma was very rapid and could be explained by a Michaelis-Menten equation: Km and Vmax values were 1.69 micrograms/ml and 4.32 micrograms/min/ml, respectively. Ap4A was degraded in rat plasma to ATP and AMP, but not to 2 ADP molecules, and these nucleotides were further degraded through adenosine. The degradations kinetics were examined. After intravenous bolus injection, Ap4A in plasma declined rapidly and the rate of elimination was dose-dependent: the biological half-life was about 3s at the dose of 1 mg/kg and was longer at 3 mg/kg. When Ap4A was administered by intravenous infusion (0.5 or 1.0 mg/kg/min), the plasma level rapidly reached a steady-state, which then rapidly declined after stopping the infusion.