The synthesis of pixelated metamaterial cross polarizer using binary wind driven optimization algorithm

Microsystem Technologies - In this paper synthesis of two wideband Metamaterial Cross Polarizer (MCPs) is proposed. The synthesis of proposed MCPs is done by using Binary Wind Driven Optimization...     

Long short-term cognitive networks

Neural Computing and Applications - In this paper, we present a recurrent neural system named long short-term cognitive networks (LSTCNs) as a generalization of the short-term cognitive network...     

Analysis of the influence of binder properties on the mechanical response of bituminous mixtures

Asphalt mixtures are composed by a mass of aggregates (more than 90% of their total weight), which are bonded by a bituminous binder. Despite the fact that the binder is not the main component of these materials (around 5% of their total weight), it exerts a high influence on their mechanical response. In this sense, the service life of asphalt pavements will directly depend on the type of binder used, and thus an adequate choice is crucial to construct more durable roads. Because of this fact, it is necessary to know the characteristics of the bitumen in order to reduce the impact of different distresses that appear on roads. For this purpose, this paper studies the influence of the binder properties in the appearance of the main distresses that affect asphalt pavements around the world (stripping, fatigue cracking and plastic deformations). Five bitumens with different properties have been analysed during this research using diverse binder (UCL, multiple stress creep and recovery test and dynamic shear rheometer time sweep) and mixture (water sensitivity, wheel tracking and UGR-FACT) tests. The results obtained show that the properties of the binder influence the long-term performance of bituminous mixtures. In this sense, it can be said that flexible binders which are able to recover plastic deformations could extend the service life of the pavements.     

Selective Al-Ti reactivity in laser-processed Al/Ti multilayers

Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200?nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4?mJ and laser spot diameter on the sample surface was 3?mm (fluence 0.057?J?cm^?2). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Young’s modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.     

Effects of material combination on laser beam drilling of a metal foil using a cover plate

This research investigated the microdrilling characteristics of metal foils depending on the materials of the cover plates and metal foils in the cover plate-laser beam machining (c-LBM) process, which is a method to achieve better quality in metal foil machining with a given piece of equipment. Laser beam drilling using a nanosecond pulsed laser was carried out on 10-µm-thick stainless steel 304 (STS304), nickel, and copper foils with 100-µm-thick cover plates of each material. Consequently, STS304 was found to be an effective cover plate material for reducing the hole diameter and spatter deposition on metal foils. Compared to the results without using a cover plate, the average hole diameter and the area of spatter deposition decreased by up to 77% and 96%, respectively, by using the STS304 cover plate. Meanwhile, the thermal deformation of the STS304 and nickel foils was prevented by using a cover plate, while the copper foil was barely deformed even without a cover plate. Lastly, it was remarkable that the copper foil was drilled with approximately 67% lower pulse energy than the effective minimum pulse energy required to drill it by using the STS304 cover plate, resulting in a smaller hole with little spatter.     

Honest confidence regions and optimality in high-dimensional precision matrix estimation

We propose methodology for estimation of sparse precision matrices and statistical inference for their low-dimensional parameters in a high-dimensional setting where the number of parameters p can be much larger than the sample size. We show that the novel estimator achieves minimax rates in supremum norm and the low-dimensional components of the estimator have a Gaussian limiting distribution. These results hold uniformly over the class of precision matrices with row sparsity of small order \(\sqrt{n}/\log p\) and spectrum uniformly bounded, under a sub-Gaussian tail assumption on the margins of the true underlying distribution. Consequently, our results lead to uniformly valid confidence regions for low-dimensional parameters of the precision matrix. Thresholding the estimator leads to variable selection without imposing irrepresentability conditions. The performance of the method is demonstrated in a simulation study and on real data.     

Bandwidth selection in kernel density estimation for interval-grouped data

When interval-grouped data are available, the classical Parzen–Rosenblatt kernel density estimator has to be modified to get a computable and useful approach in this context. The new nonparametric grouped data estimator needs of the choice of a smoothing parameter. In this paper, two different bandwidth selectors for this estimator are analyzed. A plug-in bandwidth selector is proposed and its relative rate of convergence obtained. Additionally, a bootstrap algorithm to select the bandwidth in this framework is designed. This method is easy to implement and does not require Monte Carlo. Both proposals are compared through simulations in different scenarios. It is observed that when the sample size is medium or large and grouping is not heavy, both bandwidth selection methods have a similar and good performance. However, when the sample size is large and under heavy grouping scenarios, the bootstrap bandwidth selector leads to better results.     

Adherence rates to ferric citrate as compared to active control in patients with end stage kidney disease on dialysis

Introduction: Oral phosphate binders are the main stay of treatment of hyperphosphatemia. Adherence rates to ferric citrate, a recently approved phosphate binder, are unknown. Methods: We conducted a post‐hoc analysis to evaluate whether adherence rates were different for ferric citrate vs. active control in 412 subjects with end stage kidney disease (ESKD) who were randomized to ferric citrate vs. active control (sevelamer carbonate and/or calcium acetate). Adherence was defined as percent of actual number of pills taken to total number of pills prescribed. Findings: There were no significant differences in baseline characteristics including gender, race/ethnicity, and age between the ferric citrate and active control groups. Baseline phosphorus, calcium, and parathyroid hormone levels were similar. Mean (SD) adherence was 81.4% (17.4) and 81.7% (15.9) in the ferric citrate and active control groups, respectively (P = 0.88). Adherence remained similar between both groups after adjusting for gender, race/ethnicity, age, cardiovascular disease (CVD), and diabetic nephropathy (mean [95% CI]: 81.4% [78.2, 84.6] and 81.5% [77.7, 85.2] for ferric citrate and active control, respectively). Gender, race/ethnicity, age, and diagnosis of diabetic nephropathy did not influence adherence to the prescribed phosphate binder. Subjects with CVD had lower adherence rates to phosphate binder; this was significant only in the active control group. Discussion: Adherence rates to the phosphate binder, ferric citrate, were similar to adherence rates to active control. Similar adherence rates to ferric citrate are notable since tolerance to active control was an entry criteria and the study was open label. Gender, race/ethnicity, nor age influenced adherence.     

Stability and electronic properties of armchair boron nitride/carbon nanotubes

In this work are studied the electronic and structural properties of armchair boron nitride/carbon nanotubes using first principles calculations. The density functional within the generalized gradient approximation (HSEh1PBE-GGA) is used. For each composition, different bonding schemes for the construction of the hybrid systems were employed. Among them, structural stability with neutral charge was determined for the following compositions: T1: B₄₀N₃₅C₇₅H₂₀, T2: B₃₅N₄₀C₇₅H₂₀, T3: B₃₇N₃₈C₇₅H₂₀, T4 : B₃₇N₃₇C₇₆H₂₀, and T7: B₃₅N₃₅C₈₀H₂₀. All these hybrid nanotubes have high polarity; the T3, T4 and T7 are semiconductors: whereas T1 and T2 are conductor in character. The formers also have magnetic behavior. These properties together with a low-chemical potential suggest applications as nano-vehicle for drug delivery. These mixed nanotubes also have potential applications in the electronic devices based on the small work function.     

Photocatalytic activity of a new composite material of Fe (III) oxide nanoparticles wrapped by a matrix of polymeric carbon nitride and amorphous carbon

Polymeric carbon nitride was synthesized from urea and doped with Cu and Fe to act as co-catalysts. The material doped with Fe was a new composite material composed of Fe(III) oxides (acting as a co-catalyst) wrapped by the polymer layers and amorphous carbon. Furthermore, the copper doped material was described in a previous report. The photocatalytic degradation of the azo dye direct blue 1 (DB) was studied using as photocatalysts: pure carbon nitride (CN), carbon nitride doped with Cu (CN-Cu) and carbon nitride doped with Fe (CN-Fe). The catalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), by X-ray photoelectron spectroscopy (XPS) and Brunauer–Emmett–Teller method (BET), etc. The adsorption phenomenon was studied using the Langmuir and Freundlich models. For the kinetic study, a solution of 500 mg L^?1 of DB1 was treated with each catalyst, visible light and H₂O₂. The dye concentration was measured by spectrophotometry at the wavelength of 565 nm, and the removal of the total organic content (TOC) was quantified. BET analysis yielded surface areas of 60.029, 20.116 and 70.662 m²g^?1 for CN, CN-Cu and CN-Fe, respectively. The kinetics of degradation were pseudo-first order, whose constants were 0.093, 0.039 and 0.110 min^?1 for CN, CN-Cu and CN-Fe, respectively. The total organic carbon (TOC) removal reached the highest value of 14.46% with CN-Fe.