Maturation ponds, rock filters and reedbeds in the UK: statistical analysis of winter performance.

Wastewater treatment technologies suitable for serving large populations are generally reliable and reasonably cost-effective, yet they are almost always financially inappropriate for small communities (< 2,000 p.e.). Comparative cost data suggests that waste stabilization ponds should be an attractive option for small communities, yet perceptions relating to land costs, climate and effluent quality have limited their application in the UK. This paper details typical UK land costs, climate and winter performance data for a pilot-scale waste stabilization pond with various upgrading technologies: system A, two tertiary maturation ponds in series; B, two tertiary maturation ponds in series followed by a reed bed channel; C, a control rock filter; D, an aerated rock filter; and E, a constructed wetland. System D was found to perform best, closely followed by system B.     

Nonstationary processes in a controlled electric drive with a high-voltage frequency converter intended for a mainline pump of a heat-supply station

Results of the studies of nonstationary electromagnetic and electromechanical processes that develop during the start-up (restart) of a frequency-controlled electric drive of a mainline pump as result of perturbation in the electric supply system are presented.     

Berechnung des Wärme- und Feuchtetransports in Wandelementen aus Holzwerkstoffen

On the basis of the finite difference method, a computer programme was developed for multidimensionally calculating the transport of heat and moisture in building elements. Apart from water vapor diffusion, capillary conduction of water and sorptional behavior of hygroscopic materials were also considered. Calculations were done iteratively since the material properties were not constants but depend on temperature and moisture contents of the materials. For programme testing purposes, calculations with socalled light weight wall elements were carried out, based on an artificial fast motion climate of the city of Madrid. Calculated and measured moisture contents of the materials in particleboard sheathings were compared with one another.     

New high-silicon zeolites of the TsVN series

Translated from Khimiya i Tekhnoloyiya Topliv i Masel, No. 3, pp. 3–5, March, 1989.     

A dynamic linear programming approach to market allocation of renewable resources in the italian energy system: The case of solar thermal and biogas technologies

In Italy solar thermal energy and energy from biogas are two possible means of reducing dependence on energy imports. Using a multiperiod LP model (MARKAL) the authors assessed the likely potential of both technologies under various circumstances. The study covered the period 1980–2005, in five segments of five years. It focused only on the subsystem of the energy end-uses which can be substituted for by solar thermal and biogas technologies. The overall non-renewable sources which can be saved in 20 years by these technologies total 450 PJ (1 PJ = 10^{1 5} J) if the fuel prices rise at 0 per cent average annual, 1450 PJ if the fuel prices rise at 4.2 per cent average annual, 1860 PJ if the fuel prices rise at 7.2 per cent average annual and 3780 PJ if the fuel prices rise at 15 per cent average annual. However the most competitive technologies appear to be solar water heaters used mainly in the private and commercial sectors and biogas systems used mainly in the agricultural sector. The study was carried out by APRE under ENEA (formerly CNEN) contract and was intended to serve as an analytical basis for establishing an overall development and demonstration strategy for end-use renewable technologies in Italy.     

Computing time-eigenvalues using the even-parity transport form

An adaption is presented to an earlier method for the prediction of time-eigenvalues of the neutron transport equation. Instead of using the full-parity first-order equation, the algorithm uses the even-parity formalism in the most expensive part of the computations resulting in a more economic method.     

The development of a stress analysis code for nuclear graphite components in gas-cooled reactors

Most of the UK nuclear power reactors are gas-cooled and graphite moderated. As well as acting as a moderator the graphite also acts as a structural component providing channels for the coolant gas and control rods. For this reason the structural integrity assessments of nuclear graphite components is an essential element of reactor design. In order to perform graphite component stress analysis, the definition of the constitutive equation relating stress and strain for irradiated graphite is required. Apart from the usual elastic and thermal strains, irradiated graphite components are subject to additional strains due to fast neutron irradiation and radiolytic oxidation. In this paper a material model for nuclear graphite is presented along with an example of a stress analysis of a nuclear graphite moderator brick subject to both fast neutron irradiation and radiolytic oxidation.     

Stormwater reuse: designing biofiltration systems for reliable treatment.

Stormwater reuse is increasing in popularity as a technique for overcoming water shortages in urban Australia. However, technology for the reliable treatment of stormwater for reuse is still not fully developed. This paper presents the first steps in refining biofilters for stormwater reuse. Six different filter media were selected, to target specific stormwater pollutants, as well as support plant growth. They were tested in the laboratory, where the filters were dosed three times per week with semi-synthetic stormwater for five weeks. Pollutant removal performance was monitored, and revealed that all soil-based filters performed similarly (while sand filters behaved somewhat differently). All filters removed more than 80% of solids and greater than 90% of lead, copper, and zinc. Three filter types were able to remove some phosphorus (particularly in the top 30 cm of the media). Apart from sand, all filter media were net producers of nitrogen, leading to an important conclusion that non-vegetated, soil-based filters are not suitable for targeting nutrients. However, since heavy metals are the primary pollutant of concern with respect to stormwater reuse for irrigation (the most popular end-use), it was concluded that biofilters may be promising technologies for treatment of stormwater for reuse.