Urgent hemodialysis with the use of peripheral veins to avoid catheter insertion

Urgent hemodialysis (HD) in patients with uremia is usually performed using a central vein catheter unless an arteriovenous fistula (AVF) was created in the predialysis period. We present a unique approach, in a patient in whom the first two HD sessions were conducted without implantation of a catheter or AVF. The perfectly developed peripheral veins of a professional bodybuilder served as vascular access allowing catheter insertion to be avoided. The aim of this short case report is to recall a forgotten method for performing urgent HD in patients without a fistula, but with suitably enlarged superficial veins.     

AFM‐Based Spin‐Exchange Microscopy Using Chiral Molecules

Local magnetic imaging at nanoscale resolution is desirable for basic studies of magnetic materials and for magnetic logic and memories. However, such local imaging is hard to achieve by means of standard magnetic force microscopy. Other techniques require low temperatures, high vacuum, or strict limitations on the sample conditions. A simple and robust method is presented for locally resolved magnetic imaging based on short‐range spin‐exchange interactions that can be scaled down to atomic resolution. The presented method requires a conventional AFM tip functionalized with a chiral molecule. In proximity to the measured magnetic sample, charge redistribution in the chiral molecule leads to a transient spin state, caused by the chiral‐induced spin‐selectivity effect, followed by the exchange interaction with the imaged sample. While magnetic force microscopy imaging strongly depends on a large working distance, an accurate image is achieved using the molecular tip in proximity to the sample. The chiral molecules' spin‐exchange interaction is found to be 150 meV. Using the tip with the adsorbed chiral molecules, two oppositely magnetized samples are characterized, and a magnetic imaging is performed. This method is simple to perform at room temperature and does not require high‐vacuum conditions.     

Optimization of reagent dosages with the use of response surface methodology and evaluation of test results with upgrading curves in graphite flotation

The aim of this study is to reduce reagent consumptions in graphite flotation with the addition of Aero 3477 promoter to the flotation stage. A three-level Box–Behnken design is used for optimization and modeling of flotation stages. For this purpose, the flotation experiments are performed in two steps. The maximum weight recovery and the minimum ash content values of the rougher concentrate are calculated as 21.41 and 32.49% using diesel oil dosage (714.24?g/t), methyl isobutyl carbinol (MIBC) dosage (212.81?g/t), and sodium silicate (Na₂SiO₃) dosage (1451.189?g/t), respectively, in the preliminary experiment tests. Subsequently, keeping the Na₂SiO₃ dosage constant, Aero 3477 promoter is added to the flotation stage to provide reduction at reagent consumptions. As a result, the reagent consumptions of diesel oil dosage (162.10?g/t), MIBC dosage (129.58?g/t), and Aero 3477 promoter dosage (168.96?g/t) are supplied to reach the approximate weight recovery and the ash content as in primary experimental results. Considerable dosage decreases in both diesel oil and MIBC are achieved using promoter. Moreover, experimental studies are also evaluated using upgrading curves.     

Grain growth in ultrafine grained aluminium processed by hydrostatic extrusion

Ultrafine grained materials can be produced by a number of techniques among which one can distinguish hydrostatic extrusion. In aluminium, this method can be used to obtain a structure with the grain size of 300 nm and high fraction of HAGBs (more than 70%). During annealing this structure undergoes significant changes which were evaluated quantitatively. Annealing for 1 h at temperatures up to 200 °C results in normal grain growth whereas at higher temperatures or for longer annealing times a transition from normal to abnormal growth is observed. The activation energy for low temperature regime is 43 kJ/mol whereas for high temperature annealing—128 kJ/mol. The former corresponds to grain boundary diffusion whereas the latter is close to activation energy of self diffusion in aluminium. The change in activation energy well corresponds to the transition in grain growth mechanism from normal to abnormal.     

Numerical investigation of dynamic shear bands in inelastic solids as a problem of mesomechanics

The main objective of the present paper is to discuss very efficient procedure of the numerical investigation of the propagation of shear band in inelastic solids generated by impact-loaded adiabatic processes. This procedure of investigation is based on utilization the finite element method and ABAQUS system for regularized thermo-elasto-viscoplastic constitutive model of damaged material. A general constitutive model of thermo-elasto-viscoplastic polycrystalline solids with a finite set of internal state variables is used. The set of internal state variables is restricted to only one scalar, namely equivalent inelastic deformation. The equivalent inelastic deformation can describe the dissipation effects generated by viscoplastic flow phenomena. As a numerical example we consider dynamic shear band propagation in an asymmetrically impact-loaded prenotched thin plate. The impact loading is simulated by a velocity boundary condition, which are the results of dynamic contact problem. The separation of the projectile from the specimen, resulting from wave reflections within the projectile and the specimen, occurs in the phenomenon. A thin shear band region of finite width which undergoes significant deformation and temperature rise has been determined. Shear band advance, shear band velocity and the development of the temperature field as a function of time have been determined. Qualitative comparison of numerical results with experimental observation data has been presented. The numerical results obtained have proven the usefulness of the thermo-elasto-viscoplastic theory in the investigation of dynamic shear band propagations.     

Evaluation of an injectable,photopolymerizable three-dimensional scaffold based on <Emphasis Type="SmallCaps">d</Emphasis>,<Emphasis Type="SmallCaps">l</Emphasis>-lactide and ɛ-caprolactone in a tibial goat model

An in situ crosslinkable, biodegradable, methacrylate-encapped porous bone scaffold composed of D: ,L: -lactide, varepsilon-caprolactone, 1,6-hexanediol and poly(ortho-esters), in which crosslinkage is achieved by photoinitiators, was developed for bone tissue regeneration. Three different polymer mixtures (pure polymer and 30% bioactive glass or alpha-tricalcium phosphate added) were tested in a uni-cortical tibial defect model in eight goats. The polymers were randomly applicated in one of four (6.0 mm diameter) defects leaving a fourth defect unfilled. Biocompatibility and bone healing properties were evaluated by serial radiographies, histology and histomorphometry. The pure polymer clearly showed excellent biocompatibility and moderate osteoconductive properties. The addition of alpha-TCP increased the latter characteristics. This product offers potentials as a carrier for bone healing promoter substances.     

时代发现展馆

设计说明通过与景观建筑师MarcusBarnett的合作,该临时性的花园与展馆设计探索了植物对于科学与社会的意义。植物种类的遴选,反映着植物对社会的功用,包括其日常可见的药用、商业与工业等用途。设计任务是通过近距离看到一些植物细胞结构,以及他们生长和变化的过程,     

Wetting of Sn-Zn-<Emphasis Type=Italic>x</Emphasis>In (<Emphasis Type=Italic>x</Emphasis> = 0.5, 1.0, 1.5 wt%) Alloys on Cu and Ni Substrates

Wetting angles of Sn-8.8Zn and Sn-8.8Zn-xIn alloys (x = 0.5, 1.0, 1.5 wt%) were studied with the sessile drop method. Wetting tests were carried out for 900 s in the presence of ORM0 flux at 493, 523, and 573 K on copper and at 523 K on nickel substrates, respectively. It was found that the addition of In to Sn-8.8Zn alloy improves its wetting on both substrates by reducing the value of apparent wetting angle. Also, with increasing temperature a decrease of wetting angle on copper is observed in the case of 0 and 1.5 wt% of In alloys. Solidified solder-substrate couples were cross-sectioned and examined with scanning electron microscopy coupled with electron dispersive X-ray analysis. Interlayers were found at the interface of solders with copper and nickel, and their compositions are close to Cu₅Zn₈ and Ni₅Zn₂₁ intermetallics, respectively. However, in the case of Sn-8.8Zn-1.5/Ni couple small scallops are observed instead of continuous interlayer.