The effect of contact of copper sulphide grains on the initial rate of leaching in oxygenated sulphuric acid solution

The initial stage of leaching of chalcocite, bornite, and chalcopyrite as well as chalcocite-chalcopyrite and bornite-chalcopyrite mixtures in oxygenated aqueous sulphuric acid was investigated at 368 K. It was determined that chalcopyrite accelerates the rate of copper leaching from chalcocite due to grain contact between chalcocite and chalcopyrite. In contrast, chalcopyrite decreases the rate of dissolution of bornite.     

Chicken muscle homogenate gelation properties: effect of pH and muscle fiber type

Gelation properties of chicken breast and thigh muscle homogenates at a protein concentration of 4.5% under different pH conditions (5.80–6.60) and those of myofibrillar proteins at a protein concentration of 2% were compared to determine the influence of muscle fibre types on gelation. The optimal gelling pH for breast muscle homogenates (pH 6.30) was slightly higher than that for thigh muscle homogenates (pH 5.80–6.30), a similar trend was found for the isolated chicken myofibrillar proteins (pH 6.00 for breast and 5.50 for leg). Similarly, the pH values at which breast muscle homogenate gels were weaker (pH<6.20) or stronger (pH6.20) than thigh muscle homogenate gels were higher when compared with chicken breast and leg myofibrillar protein gels (pH<5.80 and pH>5.90, respectively).     

Effect of Biaxial Load on Crack Deflection/Penetration at Bi-material Ceramic Interface

The paper investigates the effect of the biaxial loading on crack deflection/penetration at a bi-material ceramic interface. A biaxially loaded geometry was numerically investigated using Finite Element Analysis in order to determine the energy release rate. The obtained results could be used in conjunction with a fracture criteria at interface for estimating the path of the crack after the interface was reached.     

Crime hotspot mapping using the crime related factors—a spatial data mining approach

The technique of Hotspot Mapping is widely used in analysing the spatial characteristics of crimes. The spatial distribution of crime is considered to be related with a variety of socio-economic and crime opportunity factors. But existing methods usually focus on the target crime density as input without utilizing these related factors. In this study, we introduce a new crime hotspot mapping tool—Hotspot Optimization Tool (HOT). HOT is an application of spatial data miming to the field of hotspot mapping. The key component of HOT is the Geospatial Discriminative Patterns (GDPatterns) concept, which can capture the differences between two classes in a spatial dataset. Experiments are done using a real world dataset from a northeastern city in the United States and the pros and cons of utilizing related factors in hotspot mapping are discussed. Comparison studies with the Hot Spot Analysis tool implemented by Esri ArcMap 10.1 validate that HOT is capable of accurately mapping crime hotspots.     

Molecular characterization of penicillin-resistant Streptococcus pneumoniae isolates from Bulgaria

As part of an ongoing surveillance program of antibiotic-resistant Streptococcus pneumoniae in Sofia, Bulgaria, 120 penicillin-resistant strains (PRSP) (most of them recovered from children hospitalized with pneumococcal disease) were analyzed by microbiological and molecular methods. Several unique features of this collection are of particular interest. (i) Most isolates (112 of 120) were also resistant to trimethoprim-sulfamethoxazole (SXT) (97 of 120 isolates, or 80%), and over 70% (86 of 120) of the isolates were resistant to at least three antibiotics in addition to penicillin. (ii) Close to 80% of all isolates were represented by large clusters of bacteria, each with a unique serotype, antibiotype, and chromosomal macrorestriction pattern (determined by pulsed-field gel electrophoresis), as well as unique restriction fragmentation length polymorphisms of the penicillin-binding protein genes pbp1a, pbp2x, and pbp2b. (iii) A large proportion (45 of 120, or 38%) of the strains belonged to two internationally spread epidemic clones of S. pneumoniae, the first expressing capsular type 23F and the second expressing serotype 9. (iv) A unique Bulgarian cluster composed of eight serotype 19F isolates was resistant to tetracycline, SXT, cefotaxime, and extremely high levels of penicillin and erythromycin. Nevertheless, this clone did not react with either the erm or the mef DNA probes, and thus the mechanism of macrolide resistance in this group of PRSP remains to be elucidated.     

Wetting and Interfacial Chemistry of SnZnCu Alloys with Cu and Al Substrates

Wetting of Cu and Al pads by Sn-Zn eutectic-based alloys with 0.5, 1, and 1.5 wt.% of Cu was studied at 250 °C, in the presence of ALU33® flux, with wetting times of 15, 30, 60, and 180 s, respectively. With increasing wetting time the wetting angle decreases only slightly and the angles on Cu pads are higher than those on Al pads. Selected, solidified solder-pad couples were cross-sectioned and subjected to SEM-EDS study of the interfacial microstructure. The results revealed that the microstructure of the SnZnCu/Cu interface is much different from SnZnCu/Al interface. In the first case continuous interlayers are observed while in the latter case there is no interlayer but the alloy dissolves the substrate along grain boundaries.     

Evaluation of Discretisation and Integration Methods for the Analysis of Hydrodynamic Bearings With and Without Surface Texturing

Surface texturing has been demonstrated to improve tribological performance of hydrodynamic bearings. Because the texturing increases complexity of a surface, numerical methods are required. However, no comparison study has so far been conducted to determine which methods are most accurate with the least number of grid/mesh points. Knowing this would allow for the analysis and optimisation of bearings with complex geometries. In this work, performance of four discretisation methods (finite difference, finite element, finite volume and spectral element (SE)) in approximating the pressure function and three integration methods (Newton–Cotes formulas and Gauss quadrature) in approximating the load capacity, coefficient of friction and film height was evaluated in a systematic manner. Three slider bearing geometries were used: inclined surface without texturing and two parallel surfaces textured with trapezoidal and quadratic dimples. For the evaluation, pressure function, load capacity, coefficient of friction were calculated analytically using the Reynolds equation. Differences between the analytical values and their approximations produced by the numerical methods were calculated versus the number of grid/mesh points. The numbers of points were determined for the differences below 5, 1 and 0.1 %. Results showed that the SE method and the Gauss quadrature were most accurate regardless of the bearing geometry and used up to 28 times fewer points as compared to other methods.     

Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine

This paper presents the application of the spectral kurtosis technique for detection of a tooth crack in the planetary gear of a wind turbine. The work originated from a real case of catastrophic gear failure on a wind turbine, which was not detected by currently applied methods. Nevertheless, several sets of complete vibration data were recorded and analyzed. The authors explored a number of methods commonly applied in online vibration monitoring and diagnostic systems. Those methods did not react to the failure until a few minutes before the failure. Then the method of time domain averaging of the meshing vibration is investigated. In this case, however, averaging does not detect any trace of the tooth crack, primarily because of the extreme frequency range (>four decades) of the fault symptoms. The application of the method is shown, and then the limitations of the averaging in such a case are presented and discussed. Finally, the authors propose a method based on spectral kurtosis, which yields good results. This method was able to detect the existence of the tooth crack several weeks before the gear failure.