Preliminary assessment of the stability of thin- and polymer thick-film resistors embedded into printed wiring boards

Embedding passive components into multilayer printed wiring boards (PWBs) meet electronic device requirements concerning the necessity of saving the surface board area for active elements, reducing board’s size, improving device functionality and safety as well as overall product cost reduction. Since embedded components cannot be replaced after the board is completed, a long term stability and reliability are the important concerns for manufactures.This paper presents the results of examinations of embedded thin-film NiP resistors and polymer thick-film resistors during their continuous operation and the influence of temperature on the resistance values after the simulation of a lead-free soldering process and after the temperature cycling test (?40 ?C/+85 ?C).     

Evolutionary approach to development of collaborative teleconsultation system for imaging medicine

This paper presents an evolution of a modern collaborative teleconsultation system called TeleDICOM over the period of several years. We show how new features (required from a medical point of view) can be provided, which barriers have been identified, and how these factors influence the system's architecture. A turning point in the evolution of our system was the formulation of a new architecture, fully facilitating service-oriented architecture paradigm guidelines. We therefore show how the knowledge and experience gathered during utilization of previous versions of TeleDICOM positively stimulate procedures of service-based system decomposition and business processes definition.     

Determination of electrical and mechanical parameters in capacitive MEMS accelerometers using electrical measurements

This paper describes a simple technique for characterization of capacitive MEMS accelerometers. The method is based on electrical impedance (admittance) measurements of capacitive MEMS accelerometers treated as electrostatically-driven microelectromechanical resonators. By using this method, it is possible to determine some electrical and mechanical parameters including the shunt capacitance, the mechanical resonance frequency and quality factor. These parameters may serve as measures of structural integrity of the tested structures and their packages during reliability testing, for instance.     

Polarization dependent gain in erbium-doped fiber amplifiers:computer model and approximate formulas

A computer model for polarization dependent gain (PDG) in Er-doped fiber amplifiers (EDFA) is presented. The model assumes that each erbium ion possesses an ellipsoidal gain surface and that all ion orientations are equally likely. By dividing the ions into subsets based upon orientation and computing the inversion of each subset in the presence of polarized pump and signal waves, the model predicts the dependence of the PDG induced by this polarization hole-burning (PHB) on the design of the EDFA, the signal degree and state of polarization (SOP), and the pump SOP. For moderate gain amplifiers (made from the same fiber) with the same gain peak wavelength and the same compression level, the magnitude of the PDG is nearly independent of the EDFA gain. Internal and random fiber birefringence are included to model real fibers. In fibers which cause the signal SOP to walk rapidly around the Poincare sphere, the PDG is reduced by a factor of 2/3 when compared with a linear polarization-maintained signal. Scrambled signals and partially-polarized saturating tones are also considered. Simple rules are derived for predicting the PDG of a given EDFA     

了解高级处理器特点提高编码效率

如今的数字信号处理器(DSP)在性能、外围设备集成、功耗和成本方面都具备很多优势,很多系统设计人员希望在原有系统设计中利用DSP获得比传统处理器更好的效益。但其中一个     

Dielectric integrity of thin thermal oxides on silicon

The role of silicon dioxide layers in microelectronics and the importance of their integrity are undisputable. From passivating coatings and masking layers for diffusion to ultra-thin tunneling films — all the silicon technology could not exist without silicon dioxide. This review deals with some aspects of the integrity of thin silicon dioxide films for VLSI applications. The problems of dielectric strength and wear-out are considered from the point of view of their mechanisms, models, oxide processing dependence, testing, and measuring. A brief presentation of statistical approaches commonly applied to reliability topics is also included.     

Alcohol-induced changes of {beta}-lactoglobulin - retinol-binding stoichiometry

It has been demonstrated using CD that ethanol induces importantsecondary structure changes of ß-lactoglobulin. CDspectra indicate that ß-lactoglobulin secondary structure,which is mainly composed of ß-strands, becomes mostly-helical under the influence of the solvent polarity changes.The midpoint of ß-strand/-helix transition in ß-lactoglobulinis observed at dielectric constant {small tilde}60 (35% ethanol;v/v). According to CD measurements, the ethanol-dependent secondarystructure changes are reversible. The alkylation of lysines-NH₂ in ß-lactoglobulin weakens the central ß-barrelstructure, since the ß-strand/-helix transition midpointof alkylated ß-lactoglobulin is shifted to lower ethanolconcentration (25% ethanol; v/v). ß-Lactoglobulinstructural changes are triggering the dissociation of the ß-lactoglobulin- retinol complex as judged from complete quenching of its fluorescencein ethanol concentration >30% (v/v). However, in 20% ethanol(v/v), ß-lactoglobulin still retains most of its nativesecondary structure as shown by CD and, in this condition, oneß-lactoglobulin molecule binds an additional secondretinol molecule. This suggests that the highly populated speciesobserved around 20% ethanol (v/v) might represent an intermediatestate able to bind two molecules of retinol.     

A survey on the incidence of Prototheca mastitis in dairy herds in Lublin province,Poland

Prototheca mastitis has recently become an emerging disease; although its incidence is increasing steadily, its epidemiology remains largely understudied. The aim of this work was to investigate the prevalence of Prototheca spp. in dairy cows and their environment in Lublin province, covering most of southeastern Poland. Between December 2015 and July 2016, a total of 172 milking cows from 10 dairy farms were inspected for mastitis using clinical examination and the California Mastitis Test (CMT). Quarter milk samples (QMS, n = 179) and body site swabs (n = 151) from CMT-positive cows were collected for microbiological culture. In addition, we evaluated QMS and body site swabs from 23 healthy cows, along with 91 environmental samples. Of 100 CMT-positive cows, 71 had at least one QMS positive for microbial growth. In 8 (11.3%) of these cows, originating from 7 dairy farms, Prototheca spp. were cultured. The average somatic cell count of the Prototheca-containing milk was 4.02 × 10⁶ cells/mL compared with 0.13 × 10⁶ cells/mL of the Prototheca-free milk (collected from control animals). No significant differences were observed between mastitis and control cows with respect to counts of total white blood cells, lymphocytes, neutrophils, and eosinophils. Half of the cows with Prototheca spp. in their milk did not yield the algae from other anatomical sites. Eight cows were negative for the presence of Prototheca spp. in their milk but positive for the algae in swabs from anatomical sites. Among the environmental sources that were positive for Prototheca growth were watering troughs, manure, feed, and mud. All (45) Prototheca isolates recovered in this study were subjected to species- and genotype-level molecular identification. All QMS and most of the animal swabs (90%) yielded Prototheca zopfii genotype (gen.) 2. Of the animal samples, P. zopfii gen. 1 and Prototheca blaschkeae were isolated only from feces and rectum. Environmental samples grew either P. zopfii gen. 2 (67%) or P. zopfii gen. 1 (33%). This study demonstrates that P. zopfii gen. 2 is the third most common pathogen of mastitis in cattle in southeast Poland, with an overall incidence of 4.6%. Finding Prototheca spp., including P. zopfii gen. 1 and 2 and P. blaschkeae, in stool and rectal swabs from healthy animals may suggest their role as nonpathogenic microflora of bovine gut.