Importance of specific purine-pyrimidine amino and hydroxyl groups for efficient cleavage by a hammerhead ribozyme

Subsequent of the discovery that RNA can have site specific cleavage activity, there has been a great deal of interest in the design and testing of trans-acting catalytic RNAs as therapeutic agents. We have chemically synthesized and experimentally analyzed chimeric DNA-RNA ribozymes in which the catalytic center remains as RNA.     

Antibacterial and bioactive calcium titanate layers formed on Ti metal and its alloys

An antibacterial and bioactive titanium (Ti)-based material was developed for use as a bone substitute under load-bearing conditions. As previously reported, Ti metal was successively subjected to NaOH, CaCl₂, heat, and water treatments to form a calcium-deficient calcium titanate layer on its surface. When placed in a simulated body fluid (SBF), this bioactive Ti formed an apatite layer on its surface and tightly bonded to bones in the body. To address concerns regarding deep infection during orthopedic surgery, Ag⁺ ions were incorporated on the surface of this bioactive Ti metal to impart antibacterial properties. Ti metal was first soaked in a 5 M NaOH solution to form a 1 μm-thick sodium hydrogen titanate layer on the surface and then in a 100 mM CaCl₂ solution to form a calcium hydrogen titanate layer via replacement of the Na⁺ ions with Ca²⁺ ions. The Ti material was subsequently heated at 600 °C for 1 h to transform the calcium hydrogen titanate into calcium titanate. This heat-treated titanium metal was then soaked in 0.01–10 mM AgNO₃ solutions at 80 °C for 24 h. As a result, 0.1–0.82 at.% Ag⁺ ions and a small amount of H₃O⁺ ions were incorporated into the surface calcium titanate layers. The resultant products formed apatite on their surface in an SBF, released 0.35–3.24 ppm Ag⁺ ion into the fetal bovine serum within 24 h, and exhibited a strong antibacterial effect against Staphylococcus aureus. These results suggest that the present Ti metals should exhibit strong antibacterial properties in the living body in addition to tightly bonding to the surrounding bone through the apatite layer that forms on their surfaces in the body.     

Comparative simulation of excitation and body surfaceelectrocardiogram with isotropic and anisotropic computer heart models

Comparative simulations between isotropic and anisotropic computer heart models were conducted to study the effects of myocardial anisotropy on the excitation process of the heart and on body surface electrocardiogram. The isotropic heart model includes atria, ventricles, and a special conduction system, and is electrophysiologically specified by parameters relative to action potential, conduction velocity, automaticity, and pacing. The anisotropic heart model was created by incorporating rotating fiber directions into the ventricles of the isotropic heart model. The orientation of the myocardial fibers in the ventricles of the model was gradually rotated counterclockwise from the epicardial layer to the endocardial layer for a total rotation of 90°. The anisotropy of conduction velocity and intracellular electric conductivity was included in the simulation. Comparative simulations of the normal heart, LBBB, and RBBB showed no significant differences between the two models in the excitation processes of the whole heart or in the body surface electrocardiograms. However, it was easier to induce ventricular fibrillation in the anisotropic model than in the isotropic model. The comparative simulation is useful for investigating the effects of myocardial anisotropy at the whole heart level and for evaluating limitations of the isotropic heart model     

Study on fabrication of high aspect ratio MEMS microparts using a compact SR beamline

 A compact beamline dedicated to hard x-ray deep lithography for fabrication of high aspect ratio MEMS microparts has been developed. The exposure stage was only 3 meters away from the synchrotron radiation (SR) source so that a relatively high photon flux could be achieved with a compact super-conducting SR source. The deep lithography using PMMA resist could be as deep as 1000 μm and the maximum aspect ratio achieved was about 50. The throughout for the 200 μm-deep lithography was found to be on the order of 5 cm²/h using the membrane-free mask under the routine SR conditions. Templates with the high aspect ratio microstructures have been made of the PMMA resist based on conducting substrates and applied further to electroforming to create metallic microstructures. In order to fabricate microparts for the MEMS applications, we have concentrated on development of masks for the hard x-ray deep lithography. The masks now can be made to have the 8 μm-thick gold absorber on the 2 μm-thick SiC membrane. Received: 25 August 1997/Accepted: 3 September 1997     

Vibration-based automatic power-generation system

Two types of electric power generator systems that automatically extract power from oscillating motion of a human body or vibration of machines and structures are proposed and studied. The first system utilizes self-excited rotation of an eccentric rotor that rotates in one direction in synchronization with the applied oscillating motion. Connecting an electrical load to the generator increases the damping about the rotor axis, and numerical analysis shows that there exists an upper limit to this damping to maintain the self-excited rotation mode. Excessive damping reduces the rotor to a swinging motion, resulting in decreased power output. The second type utilizes resonant vibration of a permanent magnet unit suspended by a set of springs. In order to maximize the output power, a micro controller changes the connection of the generator coils, which in effect changes the electro-mechanical damping, to keep the vibration amplitude within the allowable stroke. Theoretical analysis and experimental results are presented for both systems.     

Neuroblastoma of parotid gland: report of a case and immunohistochemical characteristics

A case of a parotid mass in a 2-year-old boy, postoperatively diagnosed as neuroblastoma, a rare tumour not previously reported in the parotid gland is presented. The neoplasm developed within the parotid gland as a painless mass without regional lymphadenopathy. Histopathologically, the tumour showed primitive nerve cells-neuroblasts-with round or oval dark basophilic nuclei and scanty cytoplasm. The cells were arranged in circular rosettes around an eosinophilic mass consisting of very fine filaments originating in the tumour cells or papillary configuration and sometimes scattered in the poorly developed stroma. Immunohistochemical evaluation of the tumour showed a positive immunoreactivity for vimentin, alpha and beta subunits of S-100 protein, neurone-specific enolase (NSE), substance P, met-enkephalin and chromogranin but cytokeratins, desmin, actin, myosin, glial fibrillary acidic protein (GFAP) and calcitonin gene related peptide (CGRP) were negative. The histopathological and immunohistochemical findings conclude a diagnosis of neuroblastoma of the parotid gland.     

Effect of HCl concentrations on apatite-forming ability of NaOH–HCl- and heat-treated titanium metal

Titanium (Ti) metal was treated with water or HCl solutions after 5 M NaOH solution treatment and then subjected to heat treatment at 600°C. The apatite-forming abilities of the treated Ti metals were examined in simulated body fluid. The apatite-forming ability of the Ti metal subjected to NaOH, water and heat treatment was lower than that of just NaOH and heat treatments. Ti metals subjected to NaOH, HCl and heat treatment showed apatite-forming abilities, which increased with increasing HCl concentrations up to the same level as that of NaOH- and heat-treated Ti metal. The former did not show a decrease in its apatite-forming ability, even in a humid environment for a long period, whereas the latter decreased its ability. The increase in the apatite-forming ability with increasing HCl concentrations suggests a different mechanism of apatite formation from that previously proposed.     

Formation of dot arrays with a pitch of 20 nm × 20 nm for patterned media using 30 keV EB drawing on thin calixarene resist

We studied the possibility of achieving very fine-pitch dot arrays with a pitch of 20?nm × 20?nm using 30?keV electron beam (EB) drawing on negative calixarene resist. In order to form such patterns, we studied the dependence on resist thickness of the dot size and the packing. We propose EB drawing on an extremely thin film for very highly packed dot-array formation. Our experimental results demonstrate the possibility of forming highly packed dot-array patterns with a pitch of 20?nm × 20?nm and a resist thickness of about 13?nm, which corresponds to about 1.6?Tbits?in(-2).     

Apatite-forming ability of Ti–15Zr–4Nb–4Ta alloy induced by calcium solution treatment

Ti–15Zr–4Nb–4Ta alloy free from cytotoxic elements shows high mechanical strength and high corrosion resistance. However, simple NaOH and heat treatments cannot induce its ability to form apatite in the body environment. In the present study, this alloy was found to exhibit high apatite-forming ability when it was treated with NaOH and CaCl₂ solutions, and then subjected to heat and hot water treatments to form calcium titanate, rutile, and anatase on its surface. Its high apatite-forming ability was maintained even in 95% relative humidity at 80°C after 1 week. The surface layer of the treated alloy had scratch resistance high enough for handling hard surgical devices. Thus, the treated alloy is believed to be useful for orthopedic and dental implants.