Combining beta-core fragment and total oestriol measurements to test for Down syndrome pregnancies

Recent articles by Cuckle et al., Canick et al., and Isozaki et al. have evaluated urine beta-core fragment as a screening test for Down syndrome in second-trimester pregnancies. They found over four-fold elevation of beta-core fragment levels in Down syndrome pregnancies, and between 62 and 88 per cent detection of this trisomy at a 5 per cent false-positive rate. Urine beta-core fragment may be a superior screening test for Down syndrome pregnancies. In the present study, urinary total oestriol has been evaluated as a marker to use in combination with beta-core fragment in screening for Down syndrome pregnancies. The two markers were evaluated separately in relation to the urine creatinine concentration. To amplify screening performance, we evaluated the ratio of beta-core fragment to total oestriol levels (creatinine-independent). beta-core fragment and total oestriol levels were determined (normalized to creatinine, ng/mg creatinine) in urine samples from 480 unaffected and 12 Down syndrome pregnancies, collected consecutively at a single prenatal diagnosis centre. The median beta-core fragment level in Down syndrome cases was 4.5 MOM. Fifty-eight per cent of Down syndrome cases had beta-core fragment levels exceeding the 95th centile of unaffected pregnancies. The median total oestriol level in Down syndrome cases was 0.33 MOM. Forty-two per cent of Down syndrome cases had total oestriol levels exceeding the 95th centile of unaffected pregnancies. We investigated the ratio of the two determinants (beta-core fragment, ng/ml divided by total oestriol, ng/ml) in our sample set. The median beta-core fragment:total oestriol ratio in Down syndrome cases was 13 MOM. Seventy-five per cent of Down syndrome cases had a ratio exceeding the 95th and the 99.5th centile of unaffected pregnancies. Total oestriol complements beta-core fragment in urine screening for Down syndrome pregnancies. A test measuring the ratio of the two urine determinants may be a significant improvement over current serum methods for detecting Down syndrome.     

Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

Expression of recombinant human thyrotropin receptor in myeloma cells

Starting with a previously isolated cDNA for human thyrotropin receptor (TSHR), we established a transformed myeloma cell line, SP56, which expresses human TSHR on its cell surface. Binding analysis showed that SP56 bears 1.1 x 10(5) TSHR per cell with a Kd of 2.2 x 10(-10) M. Using the purified cellular membrane, we established a TSH binding inhibition immunoglobulin (TBII) assay for autoantibodies against TSHR. We compared it with the TBII assay utilizing porcine thyroid membranes expressing porcine TSHR, which has been widely used for TBII assay, by using 96 serum samples from patients with autoimmune thyroid disease and normal individuals. Our TBII assay was more sensitive than the one using porcine TSHR: of 38 sera of patients which were judged negative for autoantibodies to TSHR (TBII value below 10%) by the latter assay, 28 were positive (above 20%) in our assay. By using a perfusion culture system, we obtained as many as 3 x 10(10) SP56 cells, from which 3,450 mg protein of the membrane could be purified; this is sufficient for 15,000 assays. The results indicate that the membrane of the myeloma cell line SP56 is more suitable for use in the TBII assay than the porcine thyroid membrane, in terms of sensitivity to autoantibodies against TSHR in human sera.     

Myopathology of the intrinsic laryngeal muscles in neurodegenerative diseases, with reference to the mechanism of vocal cord paralysis

To investigate the mechanism of the vocal cord abductor paralysis (VCAP) in the neurodegenerative diseases, the intrinsic laryngeal muscles (the crycothyroid, the interarytenoid, and the posterior crycoarytenoid muscles) from 41 autopsied cases were histologically examined: 10 cases of amyotrophic lateral sclerosis (ALS), 10 of Parkinson's disease (PD), 9 of multiple system atrophy (MSA), 4 of Machado-Joseph disease (MJD), 4 of progressive supranuclear palsy (PSP), 1 of familial amyloidotic polyneuropathy (FAP), and 3 of cerebrovascular diseases as a control. According to the distribution of the neurogenic changes among above-described three intrinsic laryngeal muscles, three forms were raised: 1. The totally paralytic form showing that all the three muscles developed neurogenic atrophy. This form includes ALS, MJD, and FAP. 2. The posterior muscle-paralytic form showing that only the posterior crycoarytenoid muscle was selectively involved. This form includes MSA. 3. The nonparalytic form showing no morphological abnormalities in any of the intrinsic laryngeal muscles. This type includes PD and PSP. In this nonparalytic form, supranuclear mechanism such as pyramidal or extrapyramidal tract involvement may cause VCAP through the increased laryngeal muscles tone. Considering that VCAP can be seen in any of the above-described forms, our results indicate that the mechanism of VCAP is different among the neurological disorders.     

EFFECT OF DRYING METHOD ON MESOPOROSITY OF RESORCINOL-FORMALDEHYDE DRYGEL AND CARBON GEL

Resorcinol-formaldehyde hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution. RF cryogels, RF xerogels, and RF xerogels (MW gels) were respectively prepared from RF hydrogels by freeze drying, hot air drying, and microwave drying. Carbon cryogels, carbon xerogels and carbon MW gels were subsequently obtained by pyrolyzing RF drygels in an inert atmosphere. Freeze drying and microwave drying were effective to prepare mesoporous RF drygels and carbon gels. RF cryogels and carbon cryogels showed high mesoporosity over wide ranges of the molar ratio of resorcinol to catalyst (R/C) and the ratio of resorcinol to water (R/W) used in sol-gel polycondensation. Although RF xerogels had a few mesopores, carbon xerogels had no mesopores. RF MW gels and carbon MW gels showed mesoporosity if appropriate values of R/C and R/W were selected.     

Fluorogenic derivatization reagents suitable for isolation and identification of cysteine-containing proteins utilizing high-performance liquid chromatography-tandem mass spectrometry

The fluorogenic derivatization reagents with a positive charge, 4-(dimethylaminoethylaminosulfonyl)-7-chloro-2,1,3-benzoxadiazole (DAABD-Cl) and 7-chloro-2,1,3-benzoxadiazole-4-sulfonylaminoethyltrimethylammonium chloride (TAABD-Cl), are proposed for use in proteomics studies. Following derivatization of protein mixtures with these reagents, a series of standard processes of isolation, digestion, and identification of the proteins were performed utilizing high-performance liquid chromatography-fluorescence detection and tandem mass spectrometry with the probability-based protein identification algorithm. Both DAABD and TAABD derivatives were detected fluorometrically at the femtomole level and showed more than 100-fold improvement in sensitivity compared to the underivatized original compounds with an electrospray ionization ion trap mass spectrometer analysis. The modification of the MASCOT database search system memorized with the fragment information of a DAABD-attached Cys residue allowed the identification of the proteolytic peptide fragments of the derivatized bovine serum albumin (BSA) with an estimated 38% sequence coverage of BSA. Utilizing DAABD-Cl as a derivatization reagent, identification of several proteins was also possible in a soluble extract of Caenorhabditis elegans (10 microg of protein). Consequently, for identification of proteins in the complex matrixes of proteins, DAABD-Cl could be a more appropriate reagent than ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate as reported previously.     

Autoantibodies detectable in the sera of silicosis patients. The relationship between the anti-topoisomerase I antibody response and HLA-DQB1*0402 allele in Japanese silicosis patients

Eighty-one Japanese silicosis patients and 66 healthy volunteers were analyzed for autoantibodies by ELISA, and HLA-genotyping using the PCR-RFLP method was performed. Anti-topoisomerase I (anti-topo I) autoantibodies were detected in seven patients without any clinical features of autoimmune diseases such as progressive systemic sclerosis (PSS), although anti-topo I have been mostly reported in PSS patients. Antibodies directed to RNP, ssDNA, dsDNA and cent-B were not detected among the anti-topo I positive patients. The indirect immunofluorescent staining pattern of Hep-2 cells with the sera of anti-topo I positive silicosis patients demonstrated the typical mode of anti-topo I autoantibodies observed in the patients with PSS. The allelic frequency of HLA-DQB1*0402 was significantly higher in anti-topo I positive patients (28.6%) than in anti-topo I negative patients (1.5%, P < 0.001) or healthy controls (0.8%, P<0.001). HLA-DQB1*0301, DQB1*0601 and DPB1*1801 alleles were more frequently detected in anti-topo I positive patients than in the patients without anti-topo I or in healthy volunteers, but no significant difference was observed. DQB1 allele is associated with the induction of anti-topo I autoantibodies in Japanese silicosis patients, but the allele is not the same as in Caucasian PSS patients. Another allele (DQB1*0402) plays an important role in Japanese silicosis patients. The most important factor to induce anti-topo I autoantibodies seems not to be the type of alleles themselves, but the position of some specific amino acid residues in the DQ beta first domain. These findings will be useful for preventing occupational autoimmune diseases.     

Amphiphilic Poly(Amino Acid) Nanoparticles Induce Size‐Dependent Dendritic Cell Maturation

Size‐regulated amphiphilic poly(amino acid) nanoparticles (NPs) composed of poly(γ‐glutamic acid) (γ‐PGA) and the hydrophobic amino acid derivative, L ‐phenylalanine ethyl ester (Phe) are prepared to evaluate the effects of particle size on dendritic cell (DC) uptake of NPs and their immune stimulatory activities as delivery carriers and adjuvants. The size of the Phe‐conjugated γ‐PGA NPs (γ‐PGA–Phe NPs) is easily controlled by regulating the aggregated γ‐PGA–Phe numbers. Each of the differently sized γ‐PGA–Phe NPs could efficiently encapsulate ovalbumin (OVA), and the amount of encapsulated OVA per milligram of NPs is almost the same despite the differences in size. The DC uptake of small NPs is lower than for the larger NPs, but the effect of DC activation by NPs is high in the small sizes. The DC activation is significantly affected by the size of the NPs, which suggests that not only the uptake process of the NPs, but also the surface interactions between the NPs and DCs, is important for the induction of DC maturation. The precisely size‐controllable γ‐PGA–Phe NPs have significant potential as an antigen carrier and vaccine adjuvant. These results should provide guidelines for adjuvant design in the development of an effective vaccine.     

Melting attack of solid plates by a high temperature liquid jet — effect of crust formation

When a molten UO₂ jet impinges on a steel structure in a reactor vessel during a severe accident, the erosion rate of the steel by the molten UO₂ jet is expected to be limited considerably by a UO₂ crust layer forming on a molten steel substrate at the jet/steel plate interface. A series of simulation experiments was performed to study the melting behavior of solid plates by high temperature liquid jets and the effects of crust forming at jet/structure interface. In the first series of experiments, salt (NaCl) was selected as the jet material and tin (Sn) as the solid structure. The experiments were conducted with varying the jet diameter (10 30 mm) and jet temperature (900 1100°C). The jets were accelerated to a range of 3 5 m/s at the nozzle outlet by gravitational force and impinged perpendicularly to the solid plate underneath. Furthermore, to check the effects of the thermo-physical properties on the erosion behaviors, preliminary experiments were performed by using a molten Al₂O₃ jet ( 2200°C) impinging on stainless steel plate at room temperature. The erosion rates obtained in the present experiments were far less than the values predicted by an analytical solution that neglects the existence of a crust layer and its thermal effects. With the inclusion of the crust behavior in the model, the experimental results were predicted fairly well. From the present experiments, a Nusselt number of the turbulent heat transfer, which takes into account simultaneous melting and freezing in the impingement region of a molten jet, is correlated by a Reynolds number and a Prandtl number as follows: Nu_m = 0.0033 Re---Pr.In conclusion, the existence of a crust layer plays an important role in the erosion process of a solid plate by the molten fuel jet with high melting point as in a reactor situation.