Fabrication of flat micro‐gap electrodes for molecular electronics

Recently, organic molecular electronic devices such as molecular thin‐film transistors have received considerable attention as possible candidates for next‐generation electronic and optical devices. This paper reports on fabrication technologies of flat metallic electrodes on insulating substrates with a micrometer separation for high‐performance molecular device evaluation. The key technologies of fabricating planar‐type electrodes are the liftoff method by the combination of bilayer photoresist with overhang profile, electron beam evaporation of thin metal (Ti and Au) films, and SiO₂‐CMP (Chemical Mechanical Polishing) method of CVD (Chemical Vapor Deposition)‐deposited TEOS (tetraethoxysilane)–SiO₂ layer. The raggedness of the electrode/insulator interface and the electrode surface of the micro‐gap electrodes were less than 3 nm. The isolation characteristics of fabricated electrodes were on the order of 10¹³ ohms at room temperature, which is sufficient for evaluating electronic properties of organic thin‐film devices. Finally, pentacene FET (Field Effect Transistor) characteristics are discussed fabricated on the micro‐gap flat electrodes. The mobility of this FET was 0.015 cm²/Vs, which was almost on the order of the previous results. These results suggest that high‐performance organic thin‐film transistors can be realized on these advanced electrode structures. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(2): 39–46, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20152     

Gas-storage ice grown from water containing microbubbles

Gas-storage ice is the ice that contains various functional gas pores, and can be produced by freezing water in which a desired gas is dissolved. In this conventional method, however, the gas content in the ice is limited by the gas solubility in water. To overcome this limitation, we developed a method to produce gas-storage ice from water in which microbubbles of a desired gas are dispersed, and then obtained images of the structural features of pores formed in the ice prepared using this microbubble method. The images clarified the interaction between a microbubble arriving at an ice–water interface and an existing pore already formed in the ice. The air content in ice prepared using the microbubble method was higher than that prepared using the conventional method, and was about three times higher than the solubility of air in water.     

Endometrial cytology in postmenopausal hormone replacement therapy

INTRODUCTION: The purpose was to examine whether health-promotion programs offered by California health plans are a serious attempt to improve health status or a marketing device used in an increasingly competitive marketplace. The research examined differences in the coverage, availability, utilization, and evaluation of health-promotion programs in California health plans. METHODS: A mail survey was done of the 35 HMOs (86% response) and 18 health insurance carriers (83% response) licensed to sell comprehensive health insurance in California in 1996 (some plans sell both HMO and PPO/indemnity products). The final sample included 30 commercial HMOs and 20 PPO and indemnity plans. The 1996 California Behavioral Risk Factor Survey (BRFS) of 4,000 adults was used to estimate population participation rates in health-promotion programs. RESULTS: California's HMOs in 1996 offered more comprehensive preventive benefits and health-promotion programs compared to PPO and indemnity plans. HMOs relied on a more comprehensive set of health-education methods to communicate health information to members and were more likely to open their programs to the public. HMOs are also more likely to have developed relationships with community-based and public health providers. Participation in health-promotion programs is low (2%-3%), regardless of plan type, and most health plans limit evaluations to assessment of member satisfaction and utilization. Only 35%-45% of HMOs, and no PPO/indemnity plans, assess the impact of health-promotion programs on health risks and behaviors, health status, or health care costs. CONCLUSION: For the majority of California's PPO and indemnity plans, health promotion is not an integral part of their business. For the majority of HMOs, health-promotion programs are offered primarily as a marketing vehicle. However, a substantial minority of HMOs offer health-promotion programs to achieve other organizational goals of health improvement and cost control.     

Induction of salt tolerance in Bacillus subtilis IFO 3025

Salt tolerance was induced in Bacillus subtilis IFO 3025 cells when a moderate osmotic stress was imposed by incubation in the presence of compatible solutes and 0.5 M NaCl or 0.8 M sorbitol. The optimum condition for inducing salt tolerance was observed when the cells were incubated in a solution containing 5 mM glutamate, 2.5 mM KCl, and 0.5 M NaCl or 0.8 M sorbitol. After 60 min incubation, the cells were able to form colonies on an agar plate with high salinity. It was confirmed that the cells acquired salt tolerance by accumulating glutamate and potassium ions in the cytoplasm as the main solute and ion, respectively.     

Microstructure and dielectric properties of sintered Li–Nb–Ti–O solid solution ceramics having superstructure

Effects of preparation conditions on the microstructures and periodicity of the superstructure for Li_1+xNb_1–xTi_xO₃ phase M polycrystals were investigated. Obtained specimens, mainly comprised of elongated plate-like grains, and their surfaces were found to be parallel to periodical domains. Sintered materials were found to contain Nb-doped Li₂TiO₃ based solid solution that was one of the end members in the phase diagram of constituent materials. Superperiodicity of phase M was found to be affected by the both chemical compositions and sintering conditions. The dielectric constant increased with increasing of periodicity of superstructures, which could be varied by the amount of Ti concentration. Electronic Publication     

PHoM – a Polyhedral Homotopy Continuation Method for Polynomial Systems

PHoM is a software package in C++ for finding all isolated solutions of polynomial systems using a polyhedral homotopy continuation method. Among three modules constituting the package, the first module StartSystem constructs a family of polyhedral-linear homotopy functions, based on the polyhedral homotopy theory, from input data for a given system of polynomial equations f(x)=0. The second module CMPSc traces the solution curves of the homotopy equations to compute all isolated solutions of f(x)=0. The third module Verify checks whether all isolated solutions of f(x)=0 have been approximated correctly. We describe numerical methods used in each module and the usage of the package. Numerical results to demonstrate the performance of PHoM include some large polynomial systems that have not been solved previously.AMS Subject Classification: Primary: 65H10 system of equations, secondary: 65H20 global methods, including homotopy approaches.     

Enzymatic synthesis of glycosyl cyclic tetrasaccharide with 6-alpha-glucosyltransferase and 3-alpha-isomaltosyltransferase

Transglycosylation reactions to cyclic tetrasaccharide (CTS, cyclo[-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->6)-alpha-D-Glcp-(1-->3)-alpha-D-Glcp-(1-->]) and its derivatives were investigated. An enzyme, 6-alpha-glucosyltransferase, which is involved in CTS synthesis from starch, from Bacillus globisporus C11 produced 4-O-alpha-glucosyl-CTS (4G-CTS) from a mixture containing CTS and maltopentaose. Another enzyme, 3-alpha-isomaltosyltransferase, synthesized 3-O-alpha-isomaltosyl-CTS (3IM-CTS) from CTS and panose. Two novel branched CTSs, 3-O-alpha-isomaltosyl-4-O-alpha-glucosyl-CTS (3IM-4G-CTS) and 3-O-alpha-isomaltosyl-(4-O-alpha-glucosyl)-CTS [3IM-(4G)-CTS], were synthesized by the isomaltosyl transfer of IMT into 4G-CTS. IMT also produced a novel saccharide, 3-O-alpha-isomaltosyl-3-O-alpha-isomaltosyl-CTS (3IM-3IM-CTS) from 3IM-CTS. It was confirmed that the oligosaccharides, including 4G-CTS, 3IM-CTS, 3IM-4G-CTS, 3IM-(4G)-CTS and 3IM-3IM-CTS, remaining in the reaction mixture during the production of CTS from starch were the transfer products of 6GT and IMT into CTS.     

A study on pesticide runoff from paddy fields to a river in rural region--2: development and application of a mathematical model

A mathematical model was developed to predict the runoff of pesticides from paddy fields to a river in a rural region. The model comprises three submodels: (1) submodel for river flow, (2) submodel for pesticide behavior in paddy fields, (3) submodel for pesticide behavior in a river. The tank model was applied to predict the river flow and the paddy water. In order to reproduce the actual behavior of pesticides in paddy fields, the kinetics of the transport and reaction mechanisms of pesticides applied to paddy fields were considered in the model. The model was applied to the Kozakura River Basin where the detailed field survey was conducted. The model reflected well the runoff characteristics of pesticides obtained from the detailed field survey.     

High pressure consolidation of B6O-diamond mixtures

Sintered composites in the B₆O-xdiamond (x= 0–80 vol%) system were prepared under high pressure and high temperature conditions (3–5 GPa, 1400–1800°C) from the mixture of in-laboratory synthesized B₆O powder and commercially available diamond powder with various grain sizes (<0.25, 0.5–3, and 5–10 m). Relationship among the formed phases, microstructures, and mechanical properties of the sintered composites was investigated as a function of sintering conditions, added diamond content, and grain size of diamond. Sintered composites were obtained as the B₆O-diamond mixed phases when using diamond with grain sizes greater than 0.5 m, while the partial formation of the diamond-like carbon was observed when using diamond grain sizes less than 0.25 m. Microhardness of the sintered composite was found to increase with treatment temperature and pressure, and the fracture toughness slightly decreased. A maximum microhardness of H _v57 GPa was measured in the B₆O-60 vol% diamond (grain size < 0.25 m) sintered composite under the sintering conditions of 5 GPa, 1700°C and 20 min.     

Effects of fat crystallization on the behavior of proteins and lipids at oil droplet surfaces

The effects of fat crystallization induced by thermal treatment on the rheological properties of creams and physical phenomena at the oil droplet surfaces were investigated. Creams A or B were prepared from commercial proprietary fats A or B (vegetable oils with different triaclyglycerol composition) and aqueous solution containing proteins. Thermal treatment of the creams at the “critical temperatures” (temperatures inducing a small percentage of solid fats in the oil droplets) caused a rapid increase of solid fat contents in the following cooling process. The thermal treatment of cream B at the “critical temperature” caused an increase of viscosity of the cream and an increase of protein surface coverage during the subsequent cooling process. These results suggest that the oil droplet aggregation induced by the thermal treatment at the “critical temperature” and the subsequent cooling occurred via further adsorption of proteins. Electron spin resonance measurement demonstrated the dramatic reduction of fluidity of triacylglycerol molecules at the oil droplet surface in cream B during the cooling process after thermal treatment at temperatures below “critical”. Based on these results, we speculated on the mechanism for the destabilization of thermally treated creams during the cooling process.