Numerical analysis of characteristics of microactuators driven by liquid crystals

For the purpose of developing liquid crystalline microactuators, the transient behaviors of a nematic liquid crystal between two parallel plates have been computed for various parameters such as applied voltage, the gap between the plates, and the twist and tilt angles at the plates. The Leslie-Ericksen theory has been selected as a constitutive equation. The twist angle has an effect on the induced velocity profiles; for example, the induced flow is planar at the twist angle of 0°, while the flow has an out-of-plane component when the twist angle is not 0°. Transient behaviors of shear stress acting on the plates, the flowrate, and the maximum values of the velocity, and the tilt angle between the plates have been reported. In addition, we have investigated the effects of the applied voltage, the gap between the plates, and the tilt angle at the plates on the above-mentioned values. We can develop microactuators with arbitrary characteristics by suitably controlling the applied voltage, the size of the actuators, and the director anchoring conditions.     

Improvement of anode oxidation reaction of a fuel cell using ammonium formate with Pt‐Ir catalysis

We have attempted to develop high‐performance and safe fuel cells by using ammonium formate as a solid (powder) fuel. This solid fuel has the potential of safer transportability than liquid fuels such as methanol from the viewpoint of toxicity and flammability. In order to make use of some of the advantages of ammonium formate, we investigated the oxidation characteristics of ammonium formate with respect to a Pt electrode. Cyclic voltammograms indicate that ammonium formate has high oxidation activity with respect to a Pt electrode. We have also found that the oxidation of ammonium formate can be improved by the addition of Ir to Pt catalysts. It is highly likely that ammonium formate will be useful as a solid (powder) fuel for polymer electrolyte membrane (PEM) fuel cells. This new fuel will promote the development of safe fuel cells for PEM. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 45–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21043     

Optimal memoryless regulator of large‐scale systems with time delays in the interconnections and the states via decentralized control

A method to construct optimal memoryless regulators of large‐scale systems with time delays in the interconnections and the states is proposed. Each feedback gain of decentralized control laws is obtained directly from solutions of simultaneous linear matrix inequalities. First, a sufficient condition for the stability of the overall closed‐ loop system is presented. Then it is extended so that the overall system and each subsystem remain stable, even if all or some of the interconnections between subsystems are cut. Lastly, a simplification of the implementation is discussed in the perspective of feedback loop reduction. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(4): 42–50, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21191     

Fabrication of submicron alumina ceramics by pulse electric current sintering using M2+ (M = Mg,Ca, Ni)-doped alumina nanopowders

Dense submicron-grained alumina ceramics were fabricated by pulse electric current sintering (PECS) using M²⁺(M: Mg, Ca, Ni)-doped alumina nanopowders at 1250 °C under a uniaxial pressure of 80 MPa. The M²⁺-doped alumina nanopowders (0–0.10 mass%) were prepared through a new sol–gel route using high-purity polyhydroxoaluminum (PHA) and MCl₂ solutions as starting materials. The composite gels obtained were calcined at 900 °C and ground by planetary ball milling. The powders were re-calcined at 900 °C to increase the content of α-alumina particles, which act as seeding for low-temperature densification. Densification and microstructural development depend on the M²⁺ dopant species. Dense alumina ceramics (relative density ≥99.0%) thus obtained had a uniform microstructure composed of fine grains, where the average grain size developed for non-doped, Ni-doped, Mg-doped and Ca-doped samples was 0.67, 0.67, 0.47 and 0.30 μm, respectively, showing that Ca-doping is the most promising method for tailoring of nanocrystalline alumina ceramics.     

Preparation of novel porous solids from alumina-pillared fluorine micas by acid-treatment

New porous solids from alumina-pillared fluorine micas (APMs), which were obtained from synthetic Na-tetrasilicic fluorine mica [NaMg_2.5Si₄O₁₀F₂], were prepared by sulfuric acid-treatment under mild conditions at 25 °C. The products were investigated by XRD, ICP, SEM, TEM and N₂ adsorption–desorption isotherm at 77 K. XRD measurements indicated that the interlayer pillared structure having a large basal spacing collapsed during the early stages of the acid-treatment. ICP analyses indicated that Al³⁺ and Mg²⁺ ions were leached out from the pillared micas during the acid-treatment. The pore properties of the leached products were found to differ from those of the mother pillared micas: the acid leaching of the pillared micas leads to the formation of mesopores around 3.2 nm in diameter. The correlation between the change in pore properties and cation elution behavior suggests that the mesopore formation results from the leaching of Mg²⁺ ions from the octahedral sheet of the pillared micas. The leached products thus obtained retained the flaky morphology of the mother pillared micas. These results show that the mild acid-treatment using APMs provides a novel route for obtaining unique mesopore solids having the large particle sizes of the mother micas.     

Group feature extraction based on matrix factorization from long-range office-logging data

To increase the productivity of knowledge workers, it is necessary to manage their organization so that they are motivated to collaborate with each other for their synergy. However, it is difficult for managers to grasp the explicit interactions of workers in the organization all the time. Owing to advanced communications technology, and the reduced size and improved capabilities of computers, we are able to record group behaviors as logging data in the office. The aim of this study is to extract features of group behavior from long-range office-logging data. We apply principal component analysis to the data matrix whose element is the mean travel velocity calculated from an individual’s trajectory per day. The results demonstrate the feasibility of our approach, since nontrivial informative group features can be extracted.     

Hydrostatic Pressure Influences HIF-2 Alpha Expression in Chondrocytes

Hypoxia-inducible factor (HIF)-2α is considered to play a major role in the progression of osteoarthritis. Recently, it was reported that pressure amplitude influences HIF-2α expression in murine endothelial cells. We examined whether hydrostatic pressure is involved in expression of HIF-2α in articular chondrocytes. Chondrocytes were cultured and stimulated by inflammation or hydrostatic pressure of 0, 5, 10, or 50 MPa. After stimulation, heat shock protein (HSP) 70, HIF-2α, nuclear factor kappa B (NF-κB), matrix metalloproteinase (MMP)-13, MMP-3, and vascular endothelial growth factor (VEGF) gene expression were evaluated. The levels of all gene expression were increased by inflammatory stress. When chondrocytes were exposed to a hydrostatic pressure of 5 MPa, HIF-2α, MMP-13, and MMP-3 gene expression increased significantly although those of HSP70 and NF-κB were not significantly different from the control group. In contrast, HIF-2α gene expression did not increase under a hydrostatic pressure of 50 MPa although HSP70 and NF-κB expression increased significantly compared to control. We considered that hydrostatic pressure of 5 MPa could regulate HIF-2α independent of NF-κB, because the level of HIF-2α gene expression increased significantly without upregulation of NF-κB expression at 5 MPa. Hydrostatic pressure may influence cartilage degeneration, inducing MMP-13 and MMP-3 expression through HIF-2α.     

Analysis of ultrasonic welding process of mild steel and 5052 aluminium alloy

Ultrasonic welding of mild steel sheet (SPCC) and aluminium alloy sheet (A5052) was conducted using two different weld tips of a knurled tip (K-tip) and a curved shape tip without knurled edges (C-tip). Behaviours of the weld tip and the welded materials during the weld process were analysed using a high-speed camera observation and an image correlation. The C-tip welding shows a completely different displacement behaviour from the K-tip welding; a relative motion between the tool tip and A5052 in contact with the tip predominantly occurs in the C-tip in contrast to a relative motion between A5052 and SPCC observed in the K-tip. The joint strength using the C-tip was higher than that using the K-tip under the weld conditions in this study. It is demonstrated that the relative motion behaviour in the C-tip causes a macroscopic deformation of A5052 in the vibration direction. This phenomenon promotes growth of a bonded region, resulting in the increase of joint strength. It is surmised that Fe–Al intermetallic layer forms at the weld interface, and the joint strength consequently decreases for the longer weld time condition.     

Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction

In deep geological disposal of high-level nuclear waste,one of the most important subjects is to estimate long-term stability and strength of host rock under high temperature conditions caused by radioactive decay of the waste.In this paper,some experimental researches on the thermo-mechanical characteristics of soft sedimentary rock have been presented.For this reason,a new temperature-controlled triaxial compression and creep test device,operated automatically by a computer-controlled system,whose control software has been developed by the authors,was developed to conduct the thermo-mechanical tests in different thermal loading paths,including an isothermal path.The new device is proved to be able to conduct typical thermo-mechanical element tests for soft rock.The test device and the related testing method were introduced in detail.Finally,some test results have been simulated with a thermo-elasto-viscoplastic model that was also developed by the authors.     

Development and characterization of micro-dispersed lacquer

本文利用一种特制的搅拌装置来制备微分散生漆。研究了在不同的搅拌速率和搅拌时间下所获得的生漆微粒子的直径和性能的关系。粒度分布测定表明,经过60分钟且每分钟240转搅拌处理的生漆,其粒子直径分布最窄,平均为0.194微米。凝胶色谱(GPC)分析显示生漆中的寡聚体增加的同时单体的百分含量减少了,意味着在搅拌的过程中发生了聚合反应。另外,微分散生漆的粘度、干燥成膜时间、膜亮度、膜颜色、膜光泽以及耐紫外线等特性也作了深入的探讨。