High-density β-calcium orthophosphate (β-Ca3(PO4)2, also called β-tricalcium phosphate: β-TCP) ceramics with submicrometer-sized grains were fabricated using a pulse-current
pressure firing route. The maximum relative density of the β-TCP compacts was 98.7% at 1050 °C and this was accompanied by
a translucent appearance. The mean grain size of the β-TCP compacts increased slightly with temperature to reach 0.78 μm at 1000 °C. However, upon further increasing the firing
temperature to 1050 °C the mean grain size increased significantly to 1.6 μm. The extent of plastic deformation during tensile
testing was examined at temperatures between 900 and 1100 °C using a strain rate in the range 9.26 × 10−5 to 4.44 × 10−4 s−1. The maximum tensile strain achieved was 145% for a test temperature of 1000 °C and strain rate of 1.48 × 10−4 s−1 and this was attributed to the relatively high density and small grain size. 相似文献
Rhodococcus erythropolis strains characterized as antibiotic producers can be classified into three groups according to their antibiotic spectrum and growth compatibility. Due to their high genotypic similarity, the taxonomic relationship of these strains has not been elucidated. In this study, ribosomal protein profiling using matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) was employed to classify twenty-one strains of R. erythropolis (15 antibiotic producers and 6 non-antibiotic producers). In the first step in this method, a total of 30 intense peaks observed for purified ribosomal subunit proteins of the type strain (R. erythropolis JCM 3201T) were selected as the reference peaks. The mass spectra observed for the cell lysates of each sample strain were then checked as to whether peaks were observed at the same masses of the reference peaks. The results of peak matching were processed by cluster analysis, generating a dendrogram. Four major clusters of the R. erythropolis strains corresponded to three antibiotic groups and the non-antibiotic group. Furthermore, the topology of the dendrogram was highly comparable with the phylogenetic tree based on DNA gyrase subunit B gene (gyrB) sequencing. These results indicate that our proposed ribosomal protein profiling method using MALDI-MS is a potentially reliable and sufficiently high-throughput technique for the taxonomic analysis of closely related bacterial strains without using DNA sequence information. 相似文献
In order to evaluate to the feasibility of using lecithins for nanocapsules including functional food materials, liposomes were prepared from different commercially available lecithins (SLP-WHITE, SLP-PC70 and PL30S) by the Bangham method, and their physicochemical properties were examined by using a confocal laser scanning microscopy (CLSM) and the measurements of trapping efficiency. There was little difference in the trapping efficiency among the three types of liposomes. In all cases, the trapping efficiency clearly increased with an increase of the lecithin concentration up to 10 wt % , and the maximum efficiency reached at approximately 15%. CLSM observation showed the particle size of liposomes prepared from SLP-WHITE is significantly smaller than that prepared from other lecithins. In addition, liposomal solution prepared from SLP-WHITE remained well dispersed for at least 30 days, while two other liposomal solutions showed a phase separation due to aggregation and/or fusion of liposomes. These results indicated that SLP-WHITE is the most appropriate for the preparation of stable liposomes with well dispersed among the lecithins tested. SLP-WHITE liposomes were then prepared by the mechanochemical method using a homogenizer and microfluidizer, aiming at improving the preparation efficiency and liposome stability. The particle size of the prepared SLP-WHITE liposomes decreased with increasing inlet pressure and the number of processed cycles, and reached between 73 and 123 nm based on the measurement using dynamic light scattering. Moreover, freeze-fracture transmission electron microscopy revealed that the prepared liposomes are small unilamellar vesicles (SUV) with a diameter of approximately 100 nm. The extract of Curcuma longa Linn. (Ukon), which contains curcumins as a functional food material, was then subjected to the mechanochemical method with SLP-WHITE to give liposomes including the functional materials. Interestingly, the trapping efficiency of the liposomes for curcumins was found to reach over 85%. From these results, the present mechanochemical method is very likely to allow us to efficiently prepare stable and functional liposomes from the low-cost lecithin. The method may thus have a potential for manufacturing practical nanocapsules, which serves as a novel carrier of functional food materials. 相似文献
In order to improve some inferior physical properties of bacterial poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(3HB‐co‐3HHx)] by blending with PEO, the miscibility, spherulite morphology, crystallization behavior and mechanical properties of P(3HB‐co‐3HHx)/PEO binary biodegradable polymer blends were investigated. A good miscibility between P(3HB‐co‐3HHx) with a 3HHx unit content of 11 mol‐% and PEO in the amorphous state was found when the PEO weight fraction was 10 wt.‐%, while the miscibility decreased dramatically when the PEO weight fraction exceeded 20 wt.‐%. Strongly depending on the blend composition, the mechanical properties of P(3HB‐co‐3HHx) was found to be significantly improved by blending with PEO with a weight fraction of ≈5–17.5 wt.‐%.
The chemoselective hydrogenation of unsaturated bonds and azide functionalities is achieved in the presence of nitro groups by a heterogeneous palladium catalyst supported on molecular sieves (MS3A). The present method shows a wide‐range of applicability with regard to substrates and the catalyst can be easily prepared and reused at least three times without any loss of activity. 相似文献
This paper reports on the electromagnetic influences on the analysis of biological tissue surrounding a prototype energy transmission system for a wireless capsule endoscope. Specific absorption rate (SAR) and current density were analyzed by electromagnetic simulator in a model consisting of primary coil and a human trunk including the skin, fat, muscle, small intestine, backbone, and blood. First, electric and magnetic strength in the same conditions as the analytical model were measured and compared to the analytical values to confirm the validity of the analysis. Then, SAR and current density as a function of frequency and output power were analyzed. The validity of the analysis was confirmed by comparing the analytical values with the measured ones. The SAR was below the basic restrictions of the International Commission on Nonionizing Radiation Protection (ICNIRP). At the same time, the results for current density show that the influence on biological tissue was lowest in the 300-400 kHz range, indicating that it was possible to transmit energy safely up to 160 mW. In addition, we confirmed that the current density has decreased by reducing the primary coil's current. 相似文献
We identified novel potent inhibitors of p38 mitogen-activated protein (MAP) kinase using a structure-based design strategy, beginning with lead compound, 3-(butan-2-yl)-6-(2,4-difluoroanilino)-1,3-dihydro-2H-imidazo[4,5-b]pyridin-2-one ( 1 ). To enhance the inhibitory activity of 1 against production of tumor necrosis factor-α (TNF-α) in human whole blood (hWB) cell assays, we designed and synthesized hybrid compounds in which the imidazo[4,5-b]pyridin-2-one core was successfully linked with the p-methylbenzamide fragment. Among the compounds evaluated, 3-(3-tert-butyl-2-oxo-2,3-dihydro-1H-imidazo[4,5-b]pyridin-6-yl)-4-methyl-N-(1-methyl-1H-pyrazol-3-yl)benzamide ( 25 ) exhibited potent p38 inhibition, superior suppression of TNF-α production in hWB cells, and also significant in vivo efficacy in a rat model of collagen-induced arthritis (CIA). In this paper, we report the discovery of potent, selective, and orally bioavailable imidazo[4,5-b]pyridin-2-one-based p38 MAP kinase inhibitors. 相似文献