Mechanical behavior of a single polymer chain in a non-solvent

Mechanical properties of a single polystyrene chain in mixtures of dioxane and methanol were measured with AFM. The effect of the solubility of the surrounding liquid on mechanical behavior of a polymer chain was examined. In good and Θ solvents, the force-extension curves exhibit a freely jointed chain (FJC)-like trend with good reproducibility. In a non-solvent, the profile of force-extension curve was dependent on the extension speed: an FJC-like nature emerged at the lower speed of 200 nm/s while saw-toothed curves were obtained at the higher speed of 2000 nm/s. The shape of saw-toothed curves varied from measurement to measurement. A force relaxation was also observed in the non-solvent under a fixed extension distance after 2000 nm/s extension. The mechanical behavior in non-solvents suggests that inhomogeneous deformation of a PS chain occurs due to reduction of the chain mobility.     

A Single Mutation at the Ferredoxin Binding Site of P450 Vdh Enables Efficient Biocatalytic Production of 25‐Hydroxyvitamin D3

Vitamin D₃ hydroxylase (Vdh) from Pseudonocardia autotrophica is a cytochrome P450 monooxygenase that catalyzes the two‐step hydroxylation of vitamin D₃ (VD₃) to produce 25‐hydroxyvitamin D₃ (25(OH)VD₃) and 1α,25‐dihydroxyvitamin D₃ (1α,25(OH)₂VD₃). These hydroxylated forms of VD₃ are useful as pharmaceuticals for the treatment of conditions associated with VD₃ deficiency and VD₃ metabolic disorder. Herein, we describe the creation of a highly active T107A mutant of Vdh by engineering the putative ferredoxin‐binding site. Crystallographic and kinetic analyses indicate that the T107A mutation results in conformational change from an open to a closed state, thereby increasing the binding affinity with ferredoxin. We also report the efficient biocatalytic synthesis of 25(OH)VD₃, a promising intermediate for the synthesis of various hydroxylated VD₃ derivatives, by using nisin‐treated Rhodococcus erythropolis cells containing Vdh_T107A. The gene‐expression cassette encoding Bacillus megaterium glucose dehydrogenase‐IV was inserted into the R. erythropolis chromosome and expressed to avoid exhaustion of NADH in a cytoplasm during bioconversion. As a result, approximately 573 μg mL^?1 25(OH)VD₃ was successfully produced by a 2 h bioconversion.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs

The application of an inkjet printing process for fabricating solid oxide fuel cell (SOFC) cathodes was investigated. Stably-dispersed LSCF–GDC inks were prepared by ball milling, and the composition was easily controlled by the preparation process. Fabrication of an LSCF–GDC layer was successfully carried out by depositing dots and the thickness was easily controlled by repeating printing process. A planar SOFC single cell with a double-layered cathode (comprised of a paste painted cathode layer and an inkjet printed interlayer) achieved a maximum power density of 0.71 W/cm² at 600 °C. This is the preliminary work for fabricating the cathode layer of a SOFC single cell via inkjet printing.     

Investigation of hydrogen storage capacity of various carbon materials

Hydrogen storage capacity of various carbon materials, including activated carbon (AC), single-walled carbon nanohorn, single-walled carbon nanotubes, and graphitic carbon nanofibers, was investigated at 303 and 77 K, respectively. The results showed that hydrogen storage capacity of carbon materials was less than 1 wt% at 303 K, and a super activated carbon, Maxsorb, had the highest capacity (0.67 wt%). By lowering adsorption temperature to 77 K, hydrogen storage capacity of carbon materials increased significantly and Maxsorb could store a large amount of hydrogen (5.7 wt%) at a relatively low pressure of 3 MPa. Hydrogen storage capacity of carbon materials was proportional to their specific surface area and the volume of micropores, and the narrow micropores was preferred to adsorption of hydrogen, indicating that all carbon materials adsorbed hydrogen gas through physical adsorption on the surface.     

Amino Acid Absorption in Portal Blood After Duodenal Infusions of a Soy Protein Hydrolysate Prepared by a Novel Soybean Protease D3

ABSTRACT:  The intestinal absorption of amino acids from decapeptide was investigated in rats under unrestrained conditions. The soy protein hydrolysate utilized in the experiment was produced by a novel soybean protease D3. The enzymatic features of protease D3 showed high homology with cathepsin L and cathepsin K and the average molecular weight of D3 hydrolysate is approximately 1200. We compared the intestinal absorption of D3 hydrolysate in portal blood with that of an amino acids mixture and soy protein with the same amino acid composition by determining the concentration of individual amino acids after a single administration of a nitrogen source. The absorptive velocity and intensity of each amino acid were calculated from its rate of elevation in the portal blood. And in most cases, these were higher in the D3 hydrolysate than in amino acids mixture and protein. The proportion of the amount of each amino acid absorbed in portal blood from D3 hydrolysate was much more like the composition of the administrated amino acids than like that from the amino acids mixture. The result of in vitro digestion assay indicated that D3 hydrolysate was hydrolyzed easier than the hydrolysates produced by microbial proteases. This is the first report to demonstrate that the D3 hydrolysate, which contains decapeptide as a dominant fraction, was more rapidly utilized than the amino acids mixture and protein as is the case with di-, tripeptides. This suggested that this hydrolysate could be available for nutraceutical use as well as use in nutritious foods for athletes and patients.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Fabrication of vertically aligned single-walled carbon nanotubes in atmospheric pressure non-thermal plasma CVD

A fabrication technique of high-purity vertically aligned single-walled carbon nanotubes (VA-SWCNTs) using atmospheric pressure plasma enhanced chemical vapor deposition is presented. Although densely mono-dispersed Fe-Co catalysts of a few nanometers is primarily responsible for VA-SWCNT growth, carbon precipitation was virtually absent in the thermal CVD regime at 700 °C. On the other hand, high-purity VA-SWCNTs without measurable defects were grown at 4 μm min⁻¹ by applying atmospheric pressure radio-frequency discharge (APRFD) which has been previously developed for this purpose. The results proved that cathodic ion sheath adjacent to the substrates, where a large potential drop exists, also plays an essential role for the controlled growth of SWCNTs, while ion damage to the VA-SWCNTs is inherently avoided due to high collision frequency among molecules in atmospheric pressure. Operation regime of APRFD and tentative reaction mechanisms for VA-SWCNT growth are discussed along with optical emission spectroscopy of near substrate region.