Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction

In deep geological disposal of high-level nuclear waste,one of the most important subjects is to estimate long-term stability and strength of host rock under high temperature conditions caused by radioactive decay of the waste.In this paper,some experimental researches on the thermo-mechanical characteristics of soft sedimentary rock have been presented.For this reason,a new temperature-controlled triaxial compression and creep test device,operated automatically by a computer-controlled system,whose control software has been developed by the authors,was developed to conduct the thermo-mechanical tests in different thermal loading paths,including an isothermal path.The new device is proved to be able to conduct typical thermo-mechanical element tests for soft rock.The test device and the related testing method were introduced in detail.Finally,some test results have been simulated with a thermo-elasto-viscoplastic model that was also developed by the authors.     

Development and characterization of micro-dispersed lacquer

本文利用一种特制的搅拌装置来制备微分散生漆。研究了在不同的搅拌速率和搅拌时间下所获得的生漆微粒子的直径和性能的关系。粒度分布测定表明,经过60分钟且每分钟240转搅拌处理的生漆,其粒子直径分布最窄,平均为0.194微米。凝胶色谱(GPC)分析显示生漆中的寡聚体增加的同时单体的百分含量减少了,意味着在搅拌的过程中发生了聚合反应。另外,微分散生漆的粘度、干燥成膜时间、膜亮度、膜颜色、膜光泽以及耐紫外线等特性也作了深入的探讨。     

Polymorph control of calcium carbonate by reactive crystallization using microbubble technique

In this study, we used the minute gas–liquid interfaces around CO₂/NH₃ microbubbles as new reaction fields where the crystal nucleation progresses and developed a crystallization technique to control the polymorphism of calcium carbonate (CaCO₃). In the regions around the gas–liquid interfaces of CO₂/NH₃ microbubbles, Ca²⁺ and CO₃²⁻ ion concentrations can be adjusted because of the characteristic of the electric charge on the bubble surface and the decrease in CO₂ concentration based on unit bubble caused by minimization of bubble size, and because of the pH difference between local pH at the gas–liquid interface and overall pH in the bulk liquid caused by mixing of NH₃ with CO₂; hence, the polymorph change of CaCO₃ is expected to occur. CaCO₃ was crystallized at 298 K by a semi-batch type reaction in which CO₂/NH₃/N₂ bubbles were continuously supplied to an aqueous Ca(NO₃)₂ solution using a self-supporting bubble generator. The solution pH during crystallization was maintained at a constant level of 6.9–12.0 by adding HNO₃ and NH₄OH solution. The average bubble size (d_bbl) was varied in the range of 40–1000 μm by controlling the N₂ flow rate, and the molar ratio of CO₂/NH₃ (αCO₂/NH₃${\alpha }_{\text{C}{\text{O}}_2\text{/N}{\text{H}}_3}$) was set at a specified value of 0.20–1.00 at a constant CO₂ flow rate. The following results were obtained by varying solution pH, d_bbl, and αCO₂/NH₃${\alpha }_{\text{C}{\text{O}}_2\text{/N}{\text{H}}_3}$: at a constant d_bbl of 40 μm and αCO₂/NH₃${\alpha }_{\text{C}{\text{O}}_2\text{/N}{\text{H}}_3}$ of 0.20, vaterite and calcite were major products at a solution pH lower than 9.0 and at a solution pH greater than 11.0, respectively, while aragonite was crystallized predominantly in the solution pH range of 9.7–10.5; at a constant solution pH of 9.7 the crystallization of aragonite was accelerated remarkably with a decrease in αCO₂/NH₃${\alpha }_{\text{C}{\text{O}}_2\text{/N}{\text{H}}_3}$ and d_bbl.     

Evaluation of MPN method combined with PCR procedure for detection and enumeration of Vibrio parahaemolyticus in seafood

Vibrio parahaemolyticus densities in spiked and naturally contaminated seafood samples were enumerated by the MPN method combined with a PCR procedure (MPN-PCR method) targeting the species-specific thermolabile hemolysin gene (tlh), and by the MPN method using subcultivation of alkaline-peptone-water (APW) enrichment culture on thiosulfate-citrate-bile-sucrose (TCBS) agar (MPN-TCBS method). In the samples spiked with both V. parahaemolyticus and V. alginolyticus, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were similar to, or higher than the numbers of spiked cells, whereas those enumerated by the MPN-TCBS method were below the numbers of spiked cells. In naturally contaminated seafood samples, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were higher than those by the MPN-TCBS method. In the case of the MPN-TCBS method, isolation of V. parahaemolyticus from some APW cultures was difficult because of the overgrowth of many colonies other than V. parahaemolyticus (e.g., V. alginolyticus) on TCBS agar. In contrast, the PCR technique could detect tlh from APW culture without isolation of V. parahaemolyticus, so the possibility of failing to obtain a positive result in APW culture by the MPN-PCR method was considered to be lower than that by the MPN-TCBS method. Furthermore, utilization of the PCR technique reduces the time and labor required for the biochemical identification tests used in the MPN-TCBS method. For the detection and enumeration of V. parahaemolyticus in seafood, especially for samples that show many colonies other than V. parahaemolyticus on TCBS agar, the MPN-PCR method may be more convenient and reliable than the MPN-TCBS method.     

Inhibitory effects of flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu) on antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells

We found that two distinct flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu), isoquercitrin (Isq) and hyperin (Hyp), are capable of inhibiting antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells. In order to elucidate the underlying mechanisms, we examined effects of Isq and Hyp on cellular responses induced by antigen stimulation. Treatment with both Isq and Hyp markedly inhibited antigen-stimulated elevation of intracellular free Ca²⁺ concentration and reactive oxygen species (ROS). Isq and Hyp did not affect NADPH oxidase (NOX) activity, but they possessed DPPH radical-scavenging activity similar to that of epigallocatechin gallate, a potent anti-oxidant, Finally, Isq and Hyp showed little or no effects on Ag-stimulated Syk activation or phosphorylation of signalling molecules. These results indicate that inhibition of antigen-stimulated degranulation by Isq and Hyp is mainly due to suppression of intracellular Ca²⁺ elevation, which is caused by direct scavenging of ROS that are generated by NOX. Our findings suggest that Isq and Hyp, isolated from the peel of persimmon, would be beneficial for alleviating symptoms of type I allergy.     

Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CT with digital image correlation

In this paper, localized deformation in partially saturated sand was investigated quantitatively using microfocus X-ray computed tomography (CT) and an image analysis of the CT images. Triaxial compression tests on a partially saturated dense Toyoura sand specimen were carried out under a low confining pressure and under drained conditions for both air and water. The development of localized deformation was observed macroscopically using microfocus X-ray CT, and the displacement field over the entire specimen was quantified by an image analysis of the CT images with the digital image correlation (DIC) technique. The progressive development of shear bands is discussed with reference to these images. In addition, the region of localization was observed microscopically by partial CT scanning on a micron scale with high spatial resolution. Changes in the particulate structures are also discussed herein. The DIC image analysis of the partial CT images provided a microscopic displacement field and indicated that very fine localized shear deformation developed before the shear bands had become visible in the macroscopic investigation.     

Ultrasonic irradiation on hydrolysis of magnesium hydride to enhance hydrogen generation

This paper describes the ultrasonic irradiation on the hydrolysis of magnesium hydride to enhance hydrogen generation; the effects of the ultrasonic frequency and the sample size on the hydrogen generation were mainly examined. In the experiments, three MgH₂ particle and nanofiber samples were soaked in distilled water and ultrasonically irradiated at frequencies of 28, 45, and 100 kHz. Then, the amount of hydrogen generated was measured. We found that the low frequency of ultrasonic irradiation and the relatively small sample size accelerated the hydrolysis reaction MgH₂ + 2H₂O = Mg(OH)₂ + 2H₂ + 277 kJ. In particular, the MgH₂ nanofibers exhibited the maximum hydrogen storage capacity of 14.4 mass% at room temperature at a frequency of 28 kHz (ultrasound irradiation). The results also experimentally validated that a combination of ultrasonic irradiation and MgH₂ hydrolysis is considerably effective for efficiently generating hydrogen without heating and adding any agent.     

Protective effects of galacturonic acid-rich vinegar brewed from Japanese pear in a dextran sodium sulfate-induced acute colitis model

The effects of pear vinegar (PV), which was specially brewed for enhanced galacturonic acid content, on the DSS-induced ulcerative colitis (UC) mouse model were evaluated. PV improved clinical symptoms, colon inflammation, and histological tissue injury in the DSS-induced acute UC mouse model. Moreover, PV suppressed inflammation due to acute UC by suppressing the myeloperoxidase (MPO)-mediated activation of inflammatory cells such as leukocytes and decreasing the serum concentration of IL-6. Our results demonstrated the protective action of PV in the DSS-induced acute UC mouse model. On the other hand, commercial apple vinegar did not show a protective effect in the DSS-induced acute UC mouse model. Our findings indicate that PV may act as a new functional food for inflammatory bowel disease patients.     

Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs

The application of an inkjet printing process for fabricating solid oxide fuel cell (SOFC) cathodes was investigated. Stably-dispersed LSCF–GDC inks were prepared by ball milling, and the composition was easily controlled by the preparation process. Fabrication of an LSCF–GDC layer was successfully carried out by depositing dots and the thickness was easily controlled by repeating printing process. A planar SOFC single cell with a double-layered cathode (comprised of a paste painted cathode layer and an inkjet printed interlayer) achieved a maximum power density of 0.71 W/cm² at 600 °C. This is the preliminary work for fabricating the cathode layer of a SOFC single cell via inkjet printing.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.