Internal friction behavior of an unidirectionally solidified Al2O3/YAG eutectic at high temperature

The internal friction behavior of a unidirectionally solidified Al₂O₃/YAG eutectic was examined between room temperature and 1400 °C. No internal friction was observed up to 1200 °C. Above 1200 °C, the internal friction drastically increased with increasing temperature and the number of torsional loading cycles. For the 1400 °C test, the internal friction gradually increased with the number of loading cycles and then saturated after 10³ cycles.     

Uromodulin Regulates Murine Aquaporin−2 Activity via Thick Ascending Limb–Collecting Duct Cross−Talk during Water Deprivation

Uromodulin, a urinary protein synthesized and secreted from the thick ascending limb (TAL) of the loop of Henle, is associated with hypertension through the activation of sodium reabsorption in the TAL. Uromodulin is a potential target for hypertension treatment via natriuresis. However, its biological function in epithelial cells of the distal nephron segment, particularly the collecting duct, remains unknown. Herein, we examined the regulation of uromodulin production during water deprivation in vivo as well as the effect of uromodulin on the activity of the water channel aquaporin−2 (AQP2) in vitro and in vivo using transgenic mice. Water deprivation upregulated uromodulin production; immunofluorescence experiments revealed uromodulin adhesion on the apical surface of the collecting duct. Furthermore, the activation of AQP2 was attenuated in mice lacking uromodulin. Uromodulin enhanced the phosphorylation and apical trafficking of AQP2 in mouse collecting duct cells treated with the vasopressin analog dDAVP. The uromodulin-induced apical trafficking of AQP2 was attenuated via endocytosis inhibitor treatment, suggesting that uromodulin activates AQP2 through the suppression of endocytosis. This study provides novel insights into the cross−talk between TAL and the collecting duct, and indicates that the modulation of uromodulin is a promising approach for diuresis and hypertension treatment.     

Lectin binding pattern in normal human labial mucosa

The pattern of lectin binding in normal human labial mucosa was examined by light and electron microscopy using eight different lectins (ConA, LCA, WGA, UEA-1, RCA-1, SBA, DBA and PNA) and compared with the patterns in normal human skin and oesophageal mucosa. As seen by light microscopy, ConA, LCA, and WGA stained cell membranes in all layers of the mucosae. RCA-1 stained the plasma membrane of cells in the basal and middle layers, whereas cells in the superficial layers showed little positive staining. UEA-1, SBA, and PNA stained the cells in the middle layers weakly in some cases. No positive staining for DBA was seen. By electron microscopy, reaction product indicating ConA-binding sites was observed in the plasma membrane, cisternae of the endoplasmic reticulum, nuclear envelope and the Golgi apparatus. Binding of LCA, WGA, and RCA-1 was observed in the plasma membrane. These results show that the binding pattern of PNA, SBA, and RCA-1 in labial mucosa is different from that in the normal skin or oesophageal mucosa, although the labial mucosal epithelium, epidermis, and oesophageal epithelium are all stratified squamous epithelia. These differences in the cell-surface sugar residues are likely to be related to the possible functional differences in these tissues.     

Economic Analysis of a High-volume Flexible Manufacturing System by High-speed Processing

Agility in manufacturing requires a quick response to the changes in quantity of products without losing productivity. A high-volume flexible manufacturing system (HV-FMS) attains the high flexibility as well as the high volume production. We consider in this paper the energy-saving effect of HV-FMS from the viewpoint of consumed electric power. We take a production system of cylinder heads for automobile engines as a subject in this study, and draw a comparison of the energy-saving effect between HV-FMS and flexible transfer line to verify the effectiveness of HV-FMS. Moreover, we discuss the economic effect of high-speed processing at HV-FMS. We measure the energy-saving effect by high-speed processing and give the permissible level for additional tooling cost.     

Metabolic fate of orally administered enzymatically synthesized glycogen in rats

We developed a new process for enzymatically synthesized glycogen (ESG), which is equivalent in physicochemical properties to natural-source glycogen (NSG) except its resistant property to degradation by α-amylase in vitro. In this study the metabolic fates of orally administered ESG in rats were investigated by a single oral administration test and a 2 week ingestion test. The glycemic index of ESG was 79. After the 2 week ingestion of ESG, the cecal content and production of short chain fatty acids were significantly increased, the pH value of cecal content was lowered, and the counts of Bifidobacterium and Lactobacillus in feces were significantly increased. Additionally, plasma levels of triacylglycerol and total cholesterol were significantly reduced by ESG. In contrast, NSG did not affect these parameters at all. The results collectively suggest that around 20% of orally administered ESG was transferred to the cecum in the form of polymer and assimilated into short chain fatty acids by microbiota and the polymer affected lipid metabolism.     

Hydrogen storage and thermal conductivity properties of Mg-based materials with different structures

Mg-based hydrogen storage materials can be very promising candidates for stationary energy storage application due to the high energy density and low cost of Mg. Hydrogen storage kinetics and thermal conductivity are two important factors for the material development for this kind of application. Here we studied several types of Mg-based materials with different structure-micrometer scale Mg powders, Mg nanoparticles, single crystal Mg, nanocrystalline Mg₅₀Co₅₀ BCC alloy and Mg thin film samples. It seems the Mg materials with good kinetics usually are the ones with nanostructure and tend to show poor thermal conductivity due to electron/phonon scattering resulting from more interfaces and boundaries in nanomaterials. Based on this work, good crystallinity Mg phase incorporated in carbon nano framework could be one promising option for energy storage.     

Boiling Feature on a Super Water-Repellent Surface

The boiling feature on a super water-repellent (SWR) surface has been studied. The SWR surface has a coating layer of fine particles of nickel and PTFE. Its contact angle to water is 152°in room temperature. The heat transfer surface is facing upward, and the diameter of the heated section is 17 mm. The boiling feature of this surface is completely different from that of usual surfaces. The stable film boiling occurs in very small superheating, and there is no nucleate boiling region. The bubbles generated on the surface coalesce into a vapor film without departing from the surface. The stable vapor film exists even at a surface temperature below the saturation temperature.     

Metabolic engineering study on the direct fermentation of 2-keto-L-gulonic acid, a key intermediate of L-ascorbic acid in Pseudomonas putida IFO3738

We have achieved production of 2-keto-L-gulonic acid (2-KLGA) in recombinant Pseudomonas putida IFO3738. Firstly, the genes for sorbose dehydrogenase (SDH)/sorbosone dehydrogenase (SNDH) were introduced into P. putida. The recombinant P. putida/pBBR-SDH produced 0.7 mg/ml of 2-KLGA in a culture broth containing 5% L-sorbose. Replacement of the native SNDH promoter by the Escherichia coli tufB promoter (pBBR-SDH-tufB) improved the productivity of 2-KLGA up to 11.4 mg/ml. Secondly, the sorbitol dehydrogenase (SLDH) gene was also introduced into P. putida. The recombinant P. putida/pUCP19-3DH carrying the genes for SDH, SNDH and SLDH had the ability to produce 2-KLGA (7.5 mg/ml) in a 5% d-sorbitol broth. The productivity of 2-KLGA was improved up to 9.8 mg/ml by changing to an expression system with two plasmids, pBBR-SDH-tufB (for SDH/SNDH) and pUCP19-SLDH (for SLDH), respectively. Moreover, the replacement of the native SLDH promoter by the E. coli tufB promoter (pUCP19-SLDH-tufB) improved the 2-KLGA productivity up to 11.6 mg/ml. Optimization of cultivation conditions increased the conversion yield of 2-KLGA to 32% and that of l-idonate, a metabolite of 2-KLGA, to 40%. These results indicate P. putida IFO3738 is one of the candidate strains for direct fermentation of 2-KLGA.     

Experimental study on the effect of surface conditions on evaporation of sprayed liquid droplet

The present study investigates experimentally the effects of thermal properties of the hot surface and droplet characteristics on the droplet evaporation. Cylindrical blocks made of Stainless Steel, Aluminum and Brass with different degrees of surface roughness were used. The droplet diameter and velocity were controlled independently. The behavior of droplet during the collision with hot surface was observed with a high-speed camera. The results presented the effect of the thermal properties of the hot surface, droplet Weber number, droplet velocity, droplet size, hot surface conditions; surface superheat and degree of surface roughness on the solid–liquid contact time and the maximum spread of droplet over the surface. Empirical correlations have been deduced describing the relationship between the hydrodynamic characteristics of an individual droplet impinging on a heated surface and concealing the affecting parameters in such process. Also, the comparison between the current results and the results due to others investigators shows good agreement in which the difference between them ranged from 5% to 25%.