<Emphasis Type="Italic">In Situ</Emphasis> Study of Reduction Process of CuO Paste and Its Effect on Bondability of Cu-to-Cu Joints

A bonding method utilizing redox reactions of metallic oxide microparticles achieves metal-to-metal bonding in air, which can be alternative to lead-rich high-melting point solder. However, it is known that the degree of the reduction of metallic oxide microparticles have an influence on the joint strength using this bonding method. In this paper, the reduction behavior of CuO paste and its effect on Cu-to-Cu joints were investigated through simultaneous microstructure-related x-ray diffraction and differential scanning calorimetry measurements. The CuO microparticles in the paste were gradually reduced to submicron Cu₂O particles at 210–250°C. Subsequently, Cu nanoparticles were generated instantaneously at 300–315°C. There was a marked difference in the strengths of the joints formed at 300°C and 350°C. Thus, the Cu nanoparticles play a critical role in sintering-based bonding using CuO paste. Furthermore, once the Cu nanoparticles have formed, the joint strength increases with higher bonding temperature (from 350°C to 500°C) and pressure (5–15 MPa), which can exceed the strength of Pb-5Sn solder at higher temperature and pressure.     

Influenza virus inhibits cleavage of the HSP70 pre-mRNAs at the polyadenylation site

BACKGROUND: Tocotrienols, lipid-soluble antioxidants with vitamin E activity, have been reported to lower LDL-cholesterol concentrations and platelet aggregation in men, but results are contradictory. OBJECTIVE: To examine in detail the effects of a vitamin E concentrate rich in tocotrienols on serum lipoproteins and on platelet function in men at risk for cardiovascular disease. DESIGN: In this randomized, double-blind, placebo-controlled parallel trial, 20 men received daily for 6 wk 4 capsules, each containing 35 mg tocotrienols and 20 mg alpha-tocopherol; 20 other men received 4 capsules daily, each providing 20 mg alpha-tocopherol. All men had concentrations of serum total cholesterol between 6.5 and 8.0 mmol/L or lipoprotein(a) concentrations > 150 mg/L. RESULTS: Compliance was confirmed by changes in serum tocopherol and tocotrienol concentrations. Serum LDL cholesterol in the tocotrienol group was 4.80 mmol/L before and 4.79 mmol/L after intervention, and increased from 4.70 to 4.86 mmol/L in the placebo group (95% CI for the difference: -0.54, 0.19 mmol/L; P = 0.333). Also, changes in HDL cholesterol, triacylglycerol, lipoprotein(a), and lipid peroxide concentrations did not differ between the groups. After adjustment for differences in initial values, no effects were found on collagen-induced platelet aggregation velocity, maximum aggregation, or thromboxane B2 formation in citrated whole blood. ATP release, however, was lower in the tocotrienol group. Urinary thromboxane B2 and 11-keto-thromboxane B2 concentrations and coagulation and fibrinolytic measures did not change. CONCLUSION: The tocotrienol supplements used had no marked favorable effects on the serum lipoprotein profile or on platelet function in men with slightly elevated lipid concentrations.     

Models test on dynamic structure–structure interaction of nuclear power plant buildings

A reactor building of an NPP (nuclear power plant) is generally constructed closely adjacent to a turbine building and other buildings such as the auxiliary building, and in increasing numbers of NPPs, multiple plants are being planned and constructed closely on a single site. In these situations, adjacent buildings are considered to influence each other through the soil during earthquakes and to exhibit dynamic behaviour different from that of separate buildings, because those buildings in NPP are generally heavy and massive. The dynamic interaction between buildings during earthquake through the soil is termed here as ‘dynamic cross interaction (DCI)’. In order to comprehend DCI appropriately, forced vibration tests and earthquake observation are needed using closely constructed building models. Standing on this background, Nuclear Power Engineering Corporation (NUPEC) had planned the project to investigate the DCI effect in 1993 after the preceding SSI (soil–structure interaction) investigation project, ‘Model Tests on Embedment Effect of Reactor Building’. The project consists of field and laboratory tests. The field test is being carried out using three different building construction conditions, e.g. a single reactor building to be used for the comparison purposes as for a reference, two same reactor buildings used to evaluate pure DCI effects, and two different buildings, reactor and turbine building models to evaluate DCI effects under the actual plant conditions. Forced vibration tests and earthquake observations are planned in the field test. The laboratory test is planned to evaluate basic characteristics of the DCI effects using simple soil model made of silicon rubber and structure models made of aluminum. In this test, forced vibration tests and shaking table tests are planned. The project was started in April 1994 and will be completed in March 2002. This paper describes an outline and the summary of the current status of this project.     

Direct Observation of Vortex Structure in a High Tc YBa2Cu3O7−y Thin Film by Bitter Decoration Method

The Bitter decoration technique is one of the most powerful techniques to study the vortex structure of superconductor. We report the observation of vortex structure in a high T _c YBa ₂ Cu ₃ O _7–y (YBCO) thin film by Bitter decoration method. The image of vortex structure was monitored by SEM, AFM and high resolution optical microscope. For magnetic field about 4-6mT,a vortex structure is seen. The vortex image varied with changing magnetic field. As compared with the vortex image of a Bi ₂ Sr ₂ CaCu ₂ O _8+y single crystal, the observed image appeared to be more randomly distributed.     

Rate enhancement of amines in the photopolymerization of methyl methacrylate under oxygen

The photopolymerization of methyl methacrylate was accelerated by amines such as N,N-dimethylbenzylamine, triethylamine, and diethylamine under nitrogen, in which additional initiating radicals were generated by the reaction of the amines with excited MMA. Enhanced rates were observed under oxygen for this photopolymerization in the presence of amines. Because UV spectra of the amines under oxygen indicated that the amines form charge-transfer complexes with oxygen, the rate enhancement was ascribed to photodecomposition of complexes that yield radical species. Molecular weights of polymers obtained in the photopolymerization in the presence of amines decreased under oxygen, supporting the assumed mechanism. © 1998 Society of Chemical Industry     

Video Scene Annotation Based on Web Social Activities

This article describes a mechanism to acquire the semantics of video content from the activities of Web communities that use a bulletin-board system and weblog tools to discuss video scenes.     

Effect of Surface Treatment on the Selective Photocatalytic Oxidation of Benzyl Alcohol into Benzaldehyde by O2 on TiO2 Under Visible Light

The photocatalytic oxidation of benzyl alcohol into benzaldehyde proceeded with high conversion and selectivity on a TiO₂ photocatalyst by O₂ under visible light irradiation. Surface complex formed by the interaction of benzyl alcohol with the Ti sites and/or surface OH groups of TiO₂ play an important role in the absorption of visible light and unique selective photocatalytic reaction.     

Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.     

Molecular aggregation of PEEK with PES blends and the block copolymers composed of PEEK and PES components

Polymer blends of PEEK with PES were prepared by the solution blending method. Copolymers composed of PEEK and PES components were synthesized from these oligomers. The formation conditions exerted an influence over the molecular aggregation and the crystallization behaviors of the blend films and block copolymers which were examined by X-ray diffractometry and DSC analysis. As a result, phase-separation in the blend films was found when the formation temperature was high. The blend films formed at 340°C, quenched and annealed at 180°C, exhibited the same crystallization behavior as those of PEEK. In the case of the blend films formed at 300°C, the annealing of the films at 250°C was required to crystallize the blend films. The T_g of a copolymer with a PEEK component content of more than 50% tends to shift toward a higher temperature than the T_g of PEEK itself, and the T_m of the copolymer toward a lower temperature than that of PEEK ist.     

Alternating copolymers of carbon dioxide with glycidyl ethers for novel ion-conductive polymer electrolytes

To overcome the low ionic conduction of existing poly(ethylene oxide)-based polymer electrolytes, we consider polycarbonates obtained from the copolymerization of CO₂ and epoxy monomers. We synthesized four types of polycarbonates possessing phenyl, n-butyl, t-butyl and methoxyethyl side groups using zinc glutarate, and measured the ionic conductivity of their electrolytes, including 10 mol% of LiTFSI. The electrolyte possessing methoxyethyl side groups had the highest conductivity, of the order of 10⁻⁶ S cm⁻¹ at room temperature. The activation energy (E_a) for ionic conduction in the polycarbonate electrolytes was estimated from the VTF equation, and the E_a of the electrolyte possessing n-butyl side groups was almost the same with the polyether-based electrolytes. An interesting feature of our study is that the polycarbonate is a unique candidate for ion-conductive polymers because of its flexible and hydrophobic properties.