A multimedia service composition scheme for ubiquitous networks

It is a challenging task to develop a high quality and secure multimedia service for mobile terminals used in the ubiquitous computing environment. One of the issues is the resource limitation of mobile terminals. In this paper, we presented a multimedia service composition scheme for sharing computer and communication resources by using plural terminals to compensate for this resource limitation. The proposed scheme is based on user authentication, service access control, and the multi-agent-based adaptive Quality-of-Service (QoS) control framework that we developed. We also proposed a novel access mode control based on the trustworthiness of users and extension of the multi-agent-based adaptive QoS control framework to plural users. Focusing on the home network as a typical ubiquitous network, we implemented a prototype testbed system and showed experimental results for the multimedia service composition.     

Development of a 385–500 GHz Sideband-Separating Balanced SIS Mixer

A submillimeter (385–500 GHz) low-noise sideband-separating balanced SIS (Superconductor Insulator Superconductor) mixer (Balanced 2SB mixer) with high IRR (Image Rejection Ratio) has been successfully developed, whose SSB (Single SideBand) noise temperature is ～ 200 K (10hf/k) with an image rejection ratio of ≥?～10 dB. Balanced mixers have become a promising technology which would break through the limitation especially in terahertz receivers and heterodyne arrays. However, though there are examples in microwave with relatively worse noise performance, submillimeter and terahertz balanced mixers have rarely been developed in spite of their astronomical importance. The developed balanced 2SB mixer is not only the first one demonstrated at submillimeter frequency range, but also has very low noise, high IRR, wide detectable frequencies (385–500 GHz), and a flat IF output spectrum. The balanced 2SB mixer is composed of three RF hybrids, four DSB (Double SideBand) mixers, two 180° IF hybrids, and an IF quadrature hybrid. Several important performance indicators such as noise temperature, IRR, required LO (Local Oscillator) power, and IF spectra were measured. The measured LO power required for the balanced 2SB mixer was typically ~ 14 dB less than that of the single-ended mixers.     

Preparation of refractory nitride fibers by thermal decomposition of transition metal (Ti, Nb) alkoxide-cellulose precursor gel fibers in NH3 atmosphere

Precursor gel fibers have been prepared by extruding cellulose acetate spinning solutions into transition metal (Ti, Nb, Ta) acetone solution as a coagulation bath. Gel formation must be due to the coordination of metal to OH and CO groups on the pyranose ring. The resultant gel fibers have been converted into nitride fibers by pyrolyzing the precursor in NH₃ gas flow at temperatures lower than for powder processing. The precursor gel can give a molecular scale mixture of metal and carbon sources. NbN fiber gave a superconductance at around 13 K.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Elevated Expression of CCN3 in Articular Cartilage Induces Osteoarthritis in Hip Joints Irrespective of Age and Weight Bearing

Osteoarthritis (OA) occurs not only in the knee but also in peripheral joints throughout the whole body. Previously, we have shown that the expression of cellular communication network factor 3 (CCN3), a matricellular protein, increases with age in knee articular cartilage, and the misexpression of CCN3 in cartilage induces senescence-associated secretory phenotype (SASP) factors, indicating that CCN3 promotes cartilage senescence. Here, we investigated the correlation between CCN3 expression and OA degenerative changes, principally in human femoral head cartilage. Human femoral heads obtained from patients who received total hip arthroplasty were categorized into OA and femoral neck fracture (normal) groups without significant age differences. Gene expression analysis of RNA obtained from femoral head cartilage revealed that CCN3 and MMP-13 expression in the non-weight-bearing part was significantly higher in the OA group than in the normal group, whereas the weight-bearing OA parts and normal cartilage showed no significant differences in the expression of these genes. The expression of COL10A1, however, was significantly higher in weight-bearing OA parts compared with normal weight-bearing parts, and was also higher in weight-bearing parts compared with non-weight-bearing parts in the OA group. In contrast, OA primary chondrocytes from weight-bearing parts showed higher expression of CCN3, p16, ADAMTS4, and IL-1β than chondrocytes from the corresponding normal group, and higher ADAMTS4 and IL-1β in the non-weight-bearing part compared with the corresponding normal group. Acan expression was significantly lower in the non-weight-bearing group in OA primary chondrocytes than in the corresponding normal chondrocytes. The expression level of CCN3 did not show significant differences between the weight-bearing part and non-weight-bearing part in both OA and normal primary chondrocytes. Immunohistochemical analysis showed accumulated CCN3 and aggrecan neoepitope staining in both the weight-bearing part and non-weight-bearing part in the OA group compared with the normal group. The CCN3 expression level in cartilage had a positive correlation with the Mankin score. X-ray analysis of cartilage-specific CCN3 overexpression mice (Tg) revealed deformation of the femoral and humeral head in the early stage, and immunohistochemical analysis showed accumulated aggrecan neoepitope staining as well as CCN3 staining and the roughening of the joint surface in Tg femoral and humeral heads. Primary chondrocytes from the Tg femoral head showed enhanced expression of Ccn3, Adamts5, p16, Il-6, and Tnfα, and decreased expression of Col2a1 and -an. These findings indicate a correlation between OA degenerative changes and the expression of CCN3, irrespective of age and mechanical loading. Furthermore, the Mankin score indicates that the expression level of Ccn3 correlates with the progression of OA.     

Direct Analysis of Mitochondrial Damage Caused by Misfolded/Destabilized Proteins

Protein quality control is essential for cellular homeostasis. In this study, we examined the effect of improperly folded proteins that do not form amyloid fibrils on mitochondria, which play important roles in ATP production and cell death. First, we prepared domain 3 of the dengue envelope protein in wild type and four mutants with widely different biophysical properties in misfolded/aggregated or destabilized states. The effects of the different proteins were detected using fluorescence microscopy and Western blotting, which revealed that three of the five proteins disrupted both inner and outer membrane integrity, while the other two proteins, including the wild type, did not. Next, we examined the common characteristics of the proteins that displayed toxicity against mitochondria by measuring oligomer size, molten globule-like properties, and thermal stability. The common feature of all three toxic proteins was thermal instability. Therefore, our data strongly suggest that thermally unstable proteins generated in the cytosol can cause cellular damage by coming into direct contact with mitochondria. More importantly, we revealed that this damage is not amyloid-specific.     

Dimethyl Fumarate Induces Apoptosis via Inhibition of NF-κB and Enhances the Effect of Paclitaxel and Adriamycin in Human TNBC Cells

Triple-negative breast cancer (TNBC) has the poorest prognosis of all breast cancer subtypes. Recently, the activation of NF-κB, which is involved in the growth and survival of malignant tumors, has been demonstrated in TNBC, suggesting that NF-κB may serve as a new therapeutic target. In the present study, we examined whether dimethyl fumarate (DMF), an NF-κB inhibitor, induces apoptosis in TNBC cells and enhances the apoptosis-inducing effect of paclitaxel and adriamycin. Cell survival was analyzed by the trypan blue assay and apoptosis assay. Protein detection was examined by immunoblotting. The activation of NF-κB p65 was correlated with poor prognosis in patients with TNBC. DMF induced apoptosis in MDA-MB-231 and BT-549 cells at concentrations that were non-cytotoxic to the normal mammary cell line MCF-10A. Furthermore, DMF inhibited NF-κB nuclear translocation and Survivin, XIAP, Bcl-xL, and Bcl-2 expression in MDA-MB-231 and BT-549 cells. Moreover, DMF enhanced the apoptosis-inducing effect of paclitaxel and adriamycin in MDA-MB-231 cells. These findings suggest that DMF may be an effective therapeutic agent for the treatment of TNBC, in which NF-κB is constitutively active. DMF may also be useful as an adjuvant therapy to conventional anticancer drugs.     

Effect of viscoelastic properties of the base polymer on extrusion foaming with thermally expandable microcapsules

Thermally expandable microcapsules (MCs) are applicable to the foam processing of polypropylene (PP). The purpose of this study is to clarify the influence of processing conditions, such as temperature, shear rate and resin selection, on the behavior of thermally expandable MCs in PP. In this study, MC was added to several types of PP and extrusion foaming was performed. The average diameter of the MCs after processing was calculated to characterize the expansion of PP including MCs. Two types of molecular architecture, homo- and impact-PP, were examined in this study. The expansion behavior could be summarized by the shear viscosity at the extrusion die. Irrespective of the molecular architecture, data were summarized on one curve on a plane that expressed the relation between the shear viscosity and average MC diameter. Shear viscosity is thus an effective parameter to examine base resin selection for MC foaming. POLYM. ENG. SCI., 60:558–562, 2020. © 2020 Society of Plastics Engineers     

Seismic analysis of nuclear power plants by using three-dimensional finite element models: a review

ABSTRACT

Seismic design of nuclear power plants (NPPs) is important for ensuring their integrity during earthquakes. Seismic analysis has been conducted using lumped mass beam models (LMBMs) for the design of plants in Japan, whereas three-dimensional (3D) finite element models (FEMs) have been used for novel plants outside Japan. The purposes of this study are to organize issues related to the development and application of 3D FEMs for seismic analysis of Japanese NPPs and to indicate future study directions. To organize these issues, the authors systematically investigated: (1) international guides and standards related to seismic analysis and (2) 3D FEMs of novel NPPs outside Japan. By considering other studies on the issues, the authors suggest directions for future studies. Resolving the issues will contribute to application of 3D FEMs for seismic analysis in the design of Japanese NPPs.