Differences in muscle and fat accretion in Japanese Black and European cattle

The development of different muscles and adipose tissues during growth was investigated in commercial Japanese Black (JB) cattle and compared with breeds of the largest variation to be found in Europe. Animals, reared under typical conditions for Japanese and European beef production systems, gained similar body weights but different carcass composition at 24 months of age. The carcass of JB contained more adipose tissue and the least proportion of muscle. The longissimus muscle of JB developed extraordinary amounts of 23.3% intramuscular fat (IMF) at 24 months of age, compared from 0.6% to 4.7% in European breeds. The relationships between IMF content in the longissimus muscle and different adipose tissue weights indicate that a large amount of “waste fat” is accreted with every percent of IMF. However in JB, the good ability of IMF deposition is associated with relatively least development of “waste fat”, as a result of unique breed characteristics combined with special feeding system.     

12—THEORETICAL CONSIDERATIONS IN OPEN-END SPINNING

Two problems are discussed in this paper. In the first, the effect of the deposition of fibres in open-end-spinning systems on the yarn irregularity produced is considered.

The drafting operations are divided into two types, that is, System I and System II. System I is the type in which fibres are accelerated when the leading ends arrive at a point or a specified area, and System II is the type in which the trailing ends are accelerated in the same way as those of System I. System II is more profitable if the fibres have non-uniform length, and the leading-fibre-end-density function contains most of the irregularity. The rotating-drum spinning method is also considered from the viewpoint of yarn irregularity, and the range of wavelengths that should be decreased by this method is calculated. The conclusion is that the total draft must be smaller than 2πR/[lbar], where R is the inner radius of the drum and [lbar] is the mean fibre length.

The second problem concerns the separation draft. Open-end drafting systems require very high drafts for separating the fibres. The problem is to determine what value of draft is needed. The conclusion reached is that perfect separation is impossible because of the random arrangement of fibres. The probability of separation is presented and calculated theoretically.     

Novel method for producing amorphous rice flours by milling without adding water

The present study investigated a novel milling method for producing amorphous rice starch without adding water. A new type of milling machine was developed (termed the shear and heat milling machine (SHMM)), which is capable of applying mechanical shear and heat during the milling process. The SHMM consisted of a pair of rice mortars attached to a servomotor and a ring heater. The heater was installed on the upper mortar; the temperature of the upper mortar was monitored and controlled by a thermal controller. Wide‐angle X‐ray diffraction (WAXD) analysis was used to determine the crystallinities of starch in rice flour samples produced using the SHMM at different milling temperatures. The WAXD data for milled rice flour that had been heated exhibited no diffraction peaks. This experimental result demonstrates that the developed SHMM produces amorphous rice starch easily by milling with heating without the addition of water. The milling conditions such as the shear and heat applied can be used to control the crystallinity of starch in rice.     

The relationship between ductility and grain-boundary precipitates in an Al-6.0% Zn-2.6% Mg alloy

The relationship between ductility and material parameters such as grain-boundary (GB) precipitate size and dimple size in an Al-6.0% Zn-2.6% Mg alloy has been studied. Under the condition of a given GB precipitate size, the ductility increases with decreasing number of GB precipitates and dimples per unit area. The critical GB precipitate sizes acting as the nuclei for void formation are deduced.     

Providing scalable NH-diverse iBGP route re-distribution to achieve sub-second switch-over time

The role of BGP inside an AS is to disseminate the routes learned from external peers to all routers of the AS. A straightforward, but not scalable, solution, is to resort to a full-mesh of iBGP sessions between the routers of the domain. Achieving scalability in the number of iBGP sessions is possible by using Route Reflectors (RR). Relying on a sparse iBGP graph using RRs however has a negative impact on routers’ ability to quickly switch to an alternate route in case of a failure. This stems from the fact that routers do not often know routes towards distinct next-hops, for any given prefix.In this paper, we propose a solution to build sparse iBGP topologies, where each BGP router learns two routes with distinct next-hops (NH) for each prefix. We qualify such iBGP topologies as NH-diverse. We propose to leverage the “best-external” option available on routers. By activating this option, and adding a limited number of iBGP sessions to the existing iBGP topology, we obtain NH-diverse iBGP topologies that scale, both in number of sessions and routing table sizes. We show that NH diversity enables to achieve sub-second switch-over time upon the failure of an ASBR or interdomain link. The scalability of our approach is confirmed by an evaluation on a research and a Service Provider network.     

Study of shunt type SFCL equipped with electromagnetic repulsion switch for large capacity

Using a high‐temperature superconductor, we constructed and tested a model Superconducting Fault Current Limiter (SFCL). The SFCL that we proposed has a vacuum interrupter with electromagnetic repulsion mechanism. We set out to construct a high‐voltage‐class SFCL. We produced an electromagnetic repulsion switch equipped with a 24‐kV vacuum interrupter (VI). However, the opening speed becomes slower, because the larger vacuum interrupter needs a heavier‐weight contact. For this reason, the current which flows in a superconductor may not be interruptible within a half cycle of current. In order to solve this problem, it is necessary to change the design of the coil connected in parallel and to strengthen the electromagnetic repulsion force at the time of opening the vacuum interrupter. Thus, the design of the coil was changed, and in order to examine whether the problem is solvable, a current limiting test was conducted. We carried out a current limiting test using second‐generation (2G) HTS wire. The element used in this experiment has a stainless steel stabilizer on both sides of the wire. In the experiment we succeeded in interrupting the current of a superconductor within a half cycle. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(4): 20–27, 2010; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21039     

Curvature continuous path generation for autonomous vehicle using B-spline curves

In this paper we introduce a roadmap algorithm for generating collision-free paths in terms of cubic B-spline curves for unmanned vehicles used in mining operations. The algorithm automatically generates collision-free paths that are curvature continuous with an upper bounded curvature and a small slope discontinuity of curvature at knots, when we are given the locations of the obstacles, the boundary geometry of the working area, positions and directions of the vehicle at the start, loading, and the goal points. Our algorithm also allows us to find a switch back point where the vehicle reverses its direction to enter the loading area. Examples are provided to demonstrate the effectiveness of the proposed algorithms.     

3D reconstruction considering calculation time reduction for linear trajectory shooting and accuracy verification with simulator

Artificial Life and Robotics - Photogrammetry is a three-dimensional (3D) reconstruction from images. In photogrammetry, when each image captures the features of the target object for 3D...     

Manufacture of organic transistors on large‐area flexible substrate using direct imaging exposure system by wet process suitable for roll‐to‐roll production

Organic thin‐film transistors (OTFTs) can be fabricated via a wet process and have exceptionally high flexibility. Therefore, production using the roll‐to‐roll (RtoR) method is expected. We succeeded in developing a new OTFT wet fabrication process adaptable to the RtoR process. Utilizing the electroless plating method for wiring formation, all materials can be formed in a wet process and can be patterned using the photolithography process. In addition, we succeeded in fabricating OTFT on an A4‐type flexible substrate using RtoR direct imaging exposure system.