Real-time measurement of mixing ratio of refrigerant/refrigeration oil mixture

The mixing of refrigeration oil with refrigerant in a refrigeration cycle has great influence on cycle performance. A sampling method is the most general way to measure the mixing ratio of refrigerant and refrigeration oil. Since the sampling method is time-consuming and reduces the amount of refrigerant and oil in the cycle, a real-time measurement is desirable. In this study, a refractive index measurement was applied to measure the mixing ratio of refrigerant/oil mixture. A laser displacement sensor was used to detect any change in optical path which results from changes of the refractive index of refrigerant/oil mixture. For the practical application of real-time measurement of the oil circulation ratio (OCR) in the refrigeration cycle, a correlation between the refractive index and the mixing ratio was developed. In addition, the changes of the refractive index in a range of a few percentages of the oil concentration and under subcooled conditions were measured. Finally, a transient measurement of the OCR in a practically operating refrigeration cycle was carried out successfully.     

Synthesis of Er-doped ZnO nanoparticle/organic hybrid from metal-organics

An Er-doped ZnO nanoparticle/organic hybrid was synthesized in situ from zinc acrylate (ZA) and erbium acetate (EA) using methylhydrazine. Nano-sized Er-doped ZnO particles were formed in an organic matrix by hydrolysis and polymerization of ZA–EA at 80 °C. The crystallinity of the Er-doped ZnO particles in the hybrid was dependent upon the hydrolysis temperature and water amount. Analysis by transmission electron microscopy and energy dispersive X-ray analyzer revealed that crystalline ZnO nanoparticles doped with Er were dispersed in the organic matrix. The hybrid film sandwiched between fused silica plates was highly transparent. The Er-doped ZnO particle/organic hybrid showed a photoluminescence peak at 0.81 eV (1.54 μm) attributed to the transition of Er³⁺ ions.     

Decolorization of beads-milled TiO2 nanoparticles suspension in an organic solvent

In this paper, a new method is proposed for the decolorization of a yellow-hued suspension of rutile TiO₂ nanoparticles in an organic solvent (diethylene glycol dimethylether). The presence of color has always been undesirable in a suspension of nanoparticles filler used for industrial needs, particularly for optical applications.A colorless suspension was achieved by irradiating well-dispersed TiO₂ nanoparticles in an organic solvent with UV-light (λ = 254 nm) for 5 h. TiO₂ nanoparticles of 1 and 5 wt.% were dispersed using a beads mill method. Trimethoxytrifluor(propyl) silane was used as a dispersant to achieve stability. The effect of the UV-light irradiation on the TiO₂ nanosuspension was investigated by means of a Fourier transform nuclear magnetic resonance analyzer (FT-NMR). The dispersant was partially desorbed due to the interaction of UV light and the TiO₂/dispersant complex. Thus, an enhanced transparency and the absence of color were obtained for well-dispersed TiO₂ nanoparticles in an organic solvent.     

Control of cone-jet geometry during electrospray by an electric current

A new electrospray system has been successfully developed by employing a proportional–integral–derivative control action to maintain an electric current at a certain value. A polymer precursor solution containing polyethylene glycol was used to examine the performance of this system. The result showed that cone-jet geometry could be controlled easily by adjusting the electric current. The length of the cone-jet decreased as the electric current was increased, in a correlation that followed power law. We also found that the cone-jet observed during electrospraying was stable and robust with no disturbance during long periods of use (up to 4000 s). The present study is very useful for further development of high precision aerosol generators and particle synthesis.     

Prediction of high-cycle fatigue life reliability of aluminum cast alloy from statistical characteristics of defects at meso-scale

In this paper, a growth rate law of a small fatigue crack of an arbitrary metal and a method for predicting a size distribution of spheroidal defects cut by a specimen are proposed. And then, by combining the crack growth rate law and the prediction method for the surface defect size distribution, a method for predicting a high-cycle fatigue life reliability of a metal with defects is proposed. Rotating bending fatigue tests of plain specimens with/without a small blind hole (0.3 mm in diameter, 0.15 mm in depth) are carried out on an aluminum cast alloy JIS AC4B-T6 with eutectic Si, Fe compounds and porosities. By comparing analyzed results with experimental ones, the validity of the present method is examined.     

Investigation of tribo-chemistry by means of stable isotopic tracers: Mechanism for durability of monomolecular boundary film

A monomolecular film of octadecanoic acid on a Si(1 0 0) surface was prepared using a computer-controlled Langmuir trough. The tribological properties were acquired by a ball-on-flat type tribo-tester under reciprocating motion. Considerable effects of ball material on lifetime for low friction were observed; a glass ball was excellent while a steel ball was poor. The rubbed surfaces on ball and flat were studied by time-of-flight secondary ion mass spectroscopy. Transfer of the carboxylic acid and silicon onto the ball surface from the flat specimen was found. The role of the transferred acid that prolongs the lifetime of low friction was proposed. It should be emphasized that deuterium-labeled carboxylic acid makes the target of TOF-SIMS analysis clear.     

Effects of flow rate on sensitivity and affinity in flow injection biosensor systems studied by 55-MHz wireless quartz crystal microbalance

In this paper, we developed a 55-MHz wireless-electrodeless quartz crystal microbalance (QCM) and systematically studied the effects of flow rate on the sensitivity to the detection of proteins and on the affinity between biomolecules evaluated by the flow injection system. Brownian motion of proteins in liquid suggests a low probability of meeting, and the convection effect plays an important role in the sensitivity and the affinity in the flow cell injection system. The wireless quartz crystal was isolated in the QCM cell, and flow rates between 50 and 1000 microL/min were used for monitoring binding reactions between human immunoglobulin G and Staphylococcus aureus protein A. The sensitivity was significantly increased as the flow rate increased, while the affinity value remained unchanged. However, the affinity value was affected by the reaction time for a large-concentration analyte, indicating the need of a high-sensitivity biosensor system for accurate evaluation of affinity. The electrode effect on the QCM sensitivity was also theoretically investigated, showing that the electrode significantly deteriorates the QCM sensitivity and makes the Sauerbrey equation invalid.     

Rapid In Situ Synthesis of Spherical Microflower Pt/C Catalyst Via Spray‐drying for High Performance Fuel Cell Application

A facile route for the rapid in situ synthesis of platinum nanoparticles on spherical microflower carbon has been developed. An aqueous precursor slurry containing carbon black, polystyrene latex (PSL), polyvinyl alcohol, and platinum salt was spray‐dried, followed by calcination to simultaneously reduce platinum salt and to decompose PSL particles. Prepared Pt/C catalyst showed high‐performance electrocatalytic activity with excellent durability. The mass activity and specific activity values were 132.26 mA mg^–1 Pt and 207.62 μA cm^–2 Pt, respectively. This work presents a future direction for the production of high‐performance Pt/C catalyst in an industrial scale.     

Nitrogen starvation induces expression of Lg‐FLO1 and flocculation in bottom‐fermenting yeast

When exponentially growing cells of bottom‐fermenting yeast were starved for nitrogen or were grown on proline (a non‐preferred nitrogen source), flocculation was induced. This flocculation was not induced by starvation for either carbon or amino acids. Expression of Lg‐FLO1, which is required for flocculation of bottom‐fermenting yeast, was also found to be induced by starvation for nitrogen. This suggests that the flocculation of bottom‐fermenting yeast is under the control of a nitrogen catabolite repression (NCR)‐like mechanism. Copyright © 2012 John Wiley & Sons, Ltd.     

Influence of formic acid on electrochemical properties of high‐porosity Pt/TiN nanoparticle aggregates

Platinum‐deposited titanium nitride (Pt/TiN) nanoparticle aggregates with high porosities were successfully prepared via a self‐assembly‐assisted spray pyrolysis method. The addition of formic acid (HCOOH) had a significant influence on the process, promoting the simultaneous formation of metallic Pt and reduction on the surface of the TiN support material. Complete reduction of the Pt/TiN nanoparticle aggregates improved the catalytic activity. The electrochemical surface area (ECSA) of Pt/TiN with HCOOH (Pt/TiN_w/HCOOH) was 87.15 m²/g‐Pt, which was higher than that of Pt/TiN without HCOOH (Pt/TiN_w/o‐HCOOH). The catalytic durability of Pt/TiN_w/HCOOH was twice that of Pt/TiN_w/o‐HCOOH. An effective strategy for obtaining carbon‐free catalysts with high activities and durabilities was identified. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2753–2760, 2013