Dynamic recrystallization by rapid heating followed by compression for a 17Ni–0.2C martensite steel

A 17Ni–0.2C martensite steel was rapidly heated below the austenite formation temperature and deformed in compression. Continuous dynamic recrystallization was observed. The behavior is similar to that in a ferrite–pearlite steel but the onset strain is much smaller. Sub-micron ferrite grains were obtained through the dynamic recrystallization.     

Fault tolerant approach for biosignal-based robot control

This paper proposes a fault tolerant framework for biosignal-based robot control with multiple sensor electrodes. In this approach, to cope with sensor faults, a reliable joint torque estimation model is selected from a group of estimation models based on sensor failure classifiers. The correlation among the electromyography (EMG) signal streams is used as input feature vectors for fault detection. To validate our proposed method, we artificially disconnect an EMG electrode or detach one side of an EMG probe from the skin surface during elbow-joint torque estimation experiments with five participants. When one EMG sensor electrode experiences one of the problems, the experimental results show that the joint torque can be estimated with significantly fewer errors using our proposed approach than a joint torque estimation method without sensor fault detection or than a method with a conventional sensor fault detection algorithm. Furthermore, we controlled a mannequin-arm-attached one-DOF exoskeleton based on the estimated torque profiles by generating movements with the estimated torque derived from the selected model.     

Implicit Formulation for SPH‐based Viscous Fluids

We propose a stable and efficient particle‐based method for simulating highly viscous fluids that can generate coiling and buckling phenomena and handle variable viscosity. In contrast to previous methods that use explicit integration, our method uses an implicit formulation to improve the robustness of viscosity integration, therefore enabling use of larger time steps and higher viscosities. We use Smoothed Particle Hydrodynamics to solve the full form of viscosity, constructing a sparse linear system with a symmetric positive definite matrix, while exploiting the variational principle that automatically enforces the boundary condition on free surfaces. We also propose a new method for extracting coefficients of the matrix contributed by second‐ring neighbor particles to efficiently solve the linear system using a conjugate gradient solver. Several examples demonstrate the robustness and efficiency of our implicit formulation over previous methods and illustrate the versatility of our method.     

HD/SHD still image database system and image distribution in broadband network applications

This paper focuses on a practical design for an efficient scalable image database and retrieval system over broadband networks. It describes a concrete solution for the implementation of HD/SHD (high-definition/super-high-definition) still image retrieval services which can be used in different applications. The structure of the complete system, consisting of a directory server, an image server, and MMI (man-machine interface) devices, has been presented, detailing each element and their corresponding functions. The desired HD/SHD image is displayed on the HD-PDP (plasma display panel) with the aid of image matching. The proposed system generates image index automatically, eliminating special skills in preparing index images and crucially reducing the processing time (from 35 min to 110 s), and does not use keywords. It has been also shown that these indices can be used for quite accurate image retrieval, i.e., the system provides high precision rates (currently up to 98%) to the user, eliminating troubles encountered in the image retrieval operations due to limitation on the user’s age, culture, knowledge, and languages.The broadband IP networks currently have a number of issues from the viewpoint of practical system operations, and so the requirements and issues needed for the networks are discussed from the viewpoint of in-service performance, differentiation among different types of services, secure connections, and so on, focusing on handling of HD/SHD still images.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Microstructure and properties of (Sr, Ca)CuO2/(Sr, Ca)RuO3 multilayers

Epitaxial multilayer thin films of infinite-layer (Sr, Ca)CuO₂ and perovskite (Sr, Ca)RuO₃ have been prepared on (100) SrTiO₃ substrates by multitarget rf magnetron sputtering. X-ray diffraction analyses revealed that the multilayer structure of (Sr, Ca)CuO₃/(Sr, Ca)RuO₃ was successfully fabricated with a minimum layer thickness of 20 Å. Transmission electron microscopy measurements of the multilayers indicated that there was no dislocation which normally exists in single-layer films with an infinite-layer structure. Resistivities of multilayer films at room temperature ranged from 1 to 10 m cm and showed semiconductor-like dependence against the temperature.     

Color ellipsoscope for real-time imaging of nanometer-scale surface phenomena

An imaging method was developed based on null ellipsometry with a white-light source. It is useful for visualizing the kinetics of fast surface phenomena on the nanometer scale.