Photosensitized hydrogen evolution from water using a single-walled carbon nanotube/fullerodendron/SiO2 coaxial nanohybrid

A coaxial nanohybrid consisting of a single-walled carbon nanotube (SWCNT), fullerodendron, and SiO(2) shows high-efficiency light-driven hydrogen evolution from water. Upon visible light irradiation, SWCNT/fullerodendron/SiO(2) coaxial nanohybrid shows hydrogen evolution activity in the presence of methyl viologen (MV(2+)), benzyldihydronicotinamide (BNAH), and a colloidal polyvinyl alcohol(PVA)-Pt.     

Oxygen Potential Analysis to Evaluate Irradiation Behavior in MOX and MA-Bearing MOX Fuels

Oxygen potentials of oxide nuclear fuels are important thermodynamic data in development of nuclear fuel technologies. Minor actinide bearing MOX （mixed oxide） fuels have been developed as sodium cooled fast reactor fuels. Content of Am which is one of the minor actinide elements causes oxygen potentialto increase. The effects of the oxygen potential increase on the irradiation behavior were evaluated. Profiles of temperature and O/M （oxygen-to-metal） ratio in the pellets were evaluated to better understand the irradiation behavior. From these data, local oxygen potential in the radial direction of the pellets was calculated, and was compared with free energy of compounds composed of fission products. Based on this comparison, it was concluded that Cs2MoO4 was likely formed at pellet periphery of （U07Pu03）O1.98 and （U0.66Pu03Amoo16Npo.016）Ol.976 The extent of cladding tube inner surface oxidation was predicted by using the calculated oxygen potential. No significant difference between irradiation behaviors of （Uo.7Puo3）O2_x and （U0.66PUo 3Amo.016Npo.016）O2.x pellets was confirmed.     

Power variation control of a wind generator by using feed forward control

The pitch control of wind generators is usually made by a feed back control concept. However, under the conditions where a wind speed changes very frequently due to geographic reasons of the site and the target system has large rotor inertia, the feed back signal which is applied to the control system to compensate disturbance such as wind speed variations is delayed, and consequently the control strategy to keep the generated power at a constant value does not work well. If the wind speed shows too much variation, this will cause a violent variation of power and result in step out operation of the generator from the power system due to magnetic saturation. This paper proposes a control strategy to reduce the power variations by introducing feed forward control combining with the conventional feed back control.     

Osteogenic activity of human periosteal sheets cultured on salmon collagen-coated ePTFE meshes

Our animal implantation studies have demonstrated that, after osteogenic processing, cultured human periosteal sheets form osteoid tissue ectopically without the aid of conventional scaffolding materials. To improve the osteogenic activity of these periosteal sheets, we have tested the effects of including a scaffold made of salmon collagen-coated ePTFE mesh. Periosteal sheets were produced with minimal manipulation without enzymatic digestion. Outgrown cells penetrated into the coated mesh fiber networks to form complex multicellular layers and increased expression of alkaline phosphatase activity in response to the osteoinduction. In vitro mineralization was notably enhanced in the original tissue segment regions, but numerous micro-mineral deposits were also formed on the coated-fiber networks. When implanted subcutaneously into nude mice, periosteal sheets efficiently form osteoid around the mineral deposits. These findings suggest that the intricate three-dimensional mesh composed of collagen-coated fibers substantially augmented the osteogenic activity of human periosteal sheets both in vitro and in vivo.     

Crystallographic Orientation Dependence of the Schottky Properties of Au/SrTiO3 Junctions

Crystallographic orientation dependence of the Schottky properties of Au/Nb-doped SrTiO₃ (STO:Nb) junctions has been investigated using single crystals of STO:Nb (1 0 0) and (1 1 1). It is found from electrical properties that the Schottky barrier height (SBH) of the Au/STO:Nb junctions estimated from current density (J)-voltage (V) characteristics shows crystallographic orientation dependence, while the flat band voltage estimated from capacitance (C)-voltage (V) characteristics is independent of the orientation. Displacement currents originated from the junction capacitance have been clearly observed at reverse bias voltage even in a condition of dV/dt 8.75 × 10^–3 [V/s] because of large electrostatic permittivity of the STO, and the displacement currents also showed crystallographic orientation dependence. The different response in the electrical properties of the Schottky junctions suggests that electric properties of intrinsic low permittivity layers, which exist at Au/STO:Nb interfaces, have the crystallographic orientation dependence.     

Possibility of Thermal Protection in Earth Re-entry Flight by MHD Flow Control with Air-Core Circular Magnet

The possibility of thermal protection in an earth re-entry flight by the magnetohydrodynamic (MHD) flow control with an air-core circular magnet producing about 1 T or less on the wall surface of a space vehicle is examined by r-z two-dimensional numerical simulations. The present study adopts a hemisphere with a radius of 1.0 m as the nose shape of a space vehicle. The numerical results show that aerodynamic heating can be reduced by the MHD flow control with an air-core circular magnet, and also that the maximum wall heat flux and the effect of the MHD flow control become prominent with the magnitude of coil current and the flight altitude. Furthermore, it is found that there is an optimum magnet size to maximize the effect of MHD flow control under constant exciting magnetic energy, and also the optimum size gets reduced with the decrease in the flight altitude. © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Permeation and separation of organic liquid mixtures through liquid-crystalline polymer networks

A side-chain liquid-crystalline polymer (LCP) was synthesized by the addition of the mesogenic monomer to poly(methyl siloxane) in presence of a Pt-catalyst. When an aqueous solution of 10wt% ethanol was permeated through a LCP membrane by pervaporation at various temperatures, the permeation rate increased with increasing temperature and drastically changed at glass-nematic (Tg) and nematic-isotropic (TNI) transition temperatures of the LCP membrane. The LCP membrane exhibited the waterpermselectivity in the glassy and liquid-crystalline states. The ethanol concentration in the permeate increased with increasing permeation temperature and the LCP membrane changed from the waterpermselectivity to the ethanol-permselectivity around TNI. These results suggested that the permselectivity was influenced by the change of the LCP membrane structure, that is, its state transformation. It was found that a balance of the orientation of mesogenic groups and flexibility of siloxane chains is very important for the permeability and selectivity.     

Preparation of one-dimensional photonic crystals by sol-gel process for magneto-optical materials

One-dimensional photonic crystal (PC) of periodically alternating low (SiO₂) and high (TiO₂) refractive index materials was prepared by sol-gel dip coating method that controls the thickness of each layer with nanometer level. The photonic band gap of high reflectivity was verified at wavelengths between 590 nm and 820 nm, which became significant with increasing the number of bilayer. The UV-vis spectra, SEM image and glow discharge optical emission spectroscopy indicate the periodic structure of SiO₂/TiO₂ multilayer. The magnetic layer of CoFe₂O₄ was also prepared by a sol-gel dip coating method. After the annealing at 700 °C, the single phase of CoFe₂O₄ film with spinel structure, without any preferred crystalline orientation, was obtained. In addition, the one-dimensional magnetophotonic crystal (MPC), in which the magnetic defect layer of CoFe₂O₄ is introduced into the periodic structure, was prepared. The light was localized at the magnetic defect due to the interference of the multilayer film, and the localized transmittance was observed around 530 nm. The Faraday rotation of MPC shows a peak at ∼ 570 nm which is close to the localized peak of transmittance. This may correspond to the enhancement of Faraday rotation due to the localization of light.