通过CBT方法开发低热输入低飞溅CO2/MAG交流焊接系统

OTC(DAIHEN Corporation)公司新研发的CBT焊接控制法实现了GMA焊接的低飞溅和低热输入,特别是针对薄板,进一步提高了薄板的焊接性能,这对早期的传统焊接控制技术来说是很难实现的.通过调节负极占空比,交流CBT控制法能够实现改变焊接过程中的熔深和熔敷量,有效避免了薄板焊接中的烧穿和降低热变形问题.新开发的反抽起弧控制确保了起弧的成功率并有效拟制飞溅的发生.     

New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.     

Effective synthesis of ethanol from CO2 on polyfunctional composite catalysts

Synthesis of ethanol by hydrogenation of carbon dioxide has been investigated by developing the novel composite catalysts. The three different kinds of elementary reaction functions for ethanol synthesis were undertaken. The catalytic functions are partial reduction of CO₂ to CO, C–C bond formation, and –OH group insertion. For this purpose, supported Rh catalyst, Fe-based modified Fisher–Tropsch catalyst, and Cu-based modified methanol synthesis catalyst were combined by different ways. As a result, high space–time yields of ethanol as high as 0.8–0.9 kg/l h were obtained.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Effects of magnetic field and hydrostatic pressure on martensitic transformation

Effects of magnetic field and hydrostatic pressure on martensitic transformations in some ferrous and nonferrous alloys have been studied. The studies clarified the effects of magnetic field and hydrostatic pressure on martensitic transformation start temperature, magnetoelastic martensitic transformation, morphology of martensites and transformation kinetics of athermal and isothermal transformations. That is, transformation start temperatures of all the ferrous alloys examined increase with increasing magnetic field, but those of non-ferrous, such as Ti-Ni and Cu-Al-Ni shape memory alloys, are not affected. On the other hand, transformation start temperature decreases with increasing hydrostatic pressure in some ferrous alloys, but increases in Cu-Al-Ni alloys. The magnetic field and hydrostatic pressure dependences of the martensitic start temperature are in good agreement with those calculated by the equations proposed by our group. In the work on the Fe-Ni-Co-Ti alloy, we found that magnetoelastic martensitic transformation appear. In addition, several martensite plates grow nearly parallel to the direction of applied magnetic field in the specimen of an Fe-Ni alloy single crystal. Moreover, we found that the isothermal process in an Fe-Ni-Mn alloy changes to the athermal one under magnetic field and the athermal process changes to the isothermal one under hydrostatic pressure. Based on the facts, a phenomenological theory is constructed, which unifies the two transformation processes.     

A case-control study of the association between urinary cadmium concentration and endometriosis in infertile Japanese women

Cadmium may act like an estrogen and be a potential risk factor for estrogen-related diseases such as breast cancer and endometriosis. Here, we tested the hypothesis that higher cadmium exposure is associated with endometriosis among infertile Japanese women in a hospital-based case-control study. We recruited consecutive female patients aged 20-45 years who had complained of infertility and presented to a university hospital in Tokyo. The subjects were interviewed and provided a urine sample prior to a laparoscopic diagnosis of endometriosis between January 2000 and December 2001. The severity of endometriosis was then dichotomized into controls (stage 0 and I) and cases (stage II-IV). We finally measured urinary total cadmium concentration in 54 cases and 74 controls as a biomarker of long-term cumulative exposure. Odds ratios were adjusted for average menstrual cycle length, body-mass index and smoking status using unconditional logistic regression. Results showed no association between endometriosis and urinary cadmium concentration. Medians (interquartile ranges) of urinary cadmium concentration in cases and controls were 0.53 (0.40-0.73) and 0.54 (0.34-0.76) microg/g creatinine, respectively (P for difference=0.88). Adjusted odds ratio (95% confidence interval) for the highest versus lowest tertile of urinary creatinine-adjusted cadmium concentration was 0.86 (0.30 to 2.49, P for trend=0.79). Our results do not support the hypothesis that higher urinary cadmium concentration is associated with the risk of endometriosis.     

Grain growth prediction with inclination dependence of 〈1 1 0〉 tilt grain boundary using multi-phase-field model with penalty for multiple junctions

Multi-phase-field (MPF) model with a higher-order term representing energetic penalty for multiple junctions was proposed to predict the grain growth accompanying the inclination dependence of grain boundary (GB) energy and mobility. The inclination effect was introduced on the basis of GB energy obtained from molecular dynamics (MD) simulations. The preliminary grain growth simulation of an isolated grain surrounded by Σ3 GB certified that the analytical equilibrium shape was well reproduced. The augmented higher-order term added to conventional MPF model could improve convergence and stability of numerical calculations around triple junction (TJ) region even if there exists the large GB energy gap at the TJ. Moreover, the present MPF model can realize well the Young’s relation with no GB inclination effect and further extend to the case with that effect. For the polycrystalline grain growth simulations with the GB energy distribution according to the misorientation angle of Al 〈1 1 0〉 tilt GB, Σ3 GB inclination lead the weak anisotropy characterized by Σ3{111} twin boundary. Besides, the inclination dependence can effectively drive the GBs with low GB energy like the low-angle GB during grain growth.     

Coupling-loss reduction of a vertically coupled microring resonator filter by spot-size-matched busline waveguides

To improve the input-output coupling loss of a vertically coupled microring resonator filter, we fabricated microring resonators on an antiresonant reflecting optical waveguide (ARROW) with a large spot size and on the rectangular busline waveguide with a spot-size transformer. The spot size and the tapered structure were optimally designed from the viewpoint of spot-size matching to single-mode fibers and the reduction of radiation loss. Clear dropping responses were demonstrated for the ARROW-based microring resonator filters, and the coupling loss was successfully reduced by 22 dB.