Compatibilization of an immiscible blend of EPDM and POM with an Ionomer

Immiscible blends of ethylene-propylene-diene-monomer (EPDM) and polyoxymethylene (POM), when EPDM is the major phase were compatibilized on the addition of an ionomer, poly(ethylene-co-methacrylic acid). The inclusion of the ionomer reduced the interfacial tension between the two phases, such that the diameter of the POM domains were significantly reduced to between 0.5 and 2 μm, typical of that required to toughen ductile polymers. The mechanical properties of the resultant compatibilized blends were significantly enhanced with increases in Young's modulus (↑54%), tensile strength (σ, ↑139%), elongation at break (ε, ↑97%), and tensile toughness (↑500%) with increasing ionomer content, relative to EPDM rubber alone. The ShoreA hardness of the compatibilized blend was 70.1 compared with 56.8 for the immiscible binary blend and, 50.2 for neat EPDM rubber.     

The effects of filler size on the properties of thermoplastic polyolefin blends

The effects of filler size on the properties of a thermoplastic polyolefin (TPO) blend were examined by using wollastonite and talc with particle sizes ranging from 1.2 to 40 μm. While addition of filler produced significant changes in the mechanical properties of the blend, filler size affected only impact strength. However, filler size, filler coating, and injection speed had a major effect on the surface properties of the blend. Faster injection produced denser “shear zone layers” which exhibited better scratch resistance and poorer paint adhesion than those obtained with slower injection. Scartch resistance and paint adhesion also decreased with increasing filler particle size. Filler coatings altered the scratch and adhesion properties of the polypropylene (PP) blends.     

Fault Ride-Through Capability Enhancement of VSC HVDC connected Offshore Wind Power Plants

To achieve active control of the AC voltage magnitude of wind power plant(WPP) collector network and improve the fault ride-through (FRT) capability,an FRT scheme based on feed forward DC voltage contr...     

Catalytic reforming of natural gas for hydrogen production in a pilot fluidized-bed membrane reactor: Mapping of operating and feed conditions

A fluidized-bed membrane reformer was operated in two independent laboratories to map various operating conditions, to investigate the effects of changing the composition of the natural gas feed stream and to verify earlier experimental trials. Two feed natural gases were tested, containing either 95.5 or 90.1 mol% of methane (3.6 or 9.9 mol% of other gaseous higher hydrocarbons). Experimental tests investigated the influence of total membrane area, reactor pressure, permeate pressure and natural gas feed rates. A permeate-H₂-to reactor natural gas feed molar ratio >2.3 was achieved with six two-sided membrane panels under steam reforming conditions and a pressure differential across the membranes of 785 kPa. The total cumulative reforming time reached 395 h, while hydrogen purity exceeded 99.99% during all tests.     

Brain surface conformal parameterization using Riemann surface structure

In medical imaging, parameterized 3-D surface models are useful for anatomical modeling and visualization, statistical comparisons of anatomy, and surface-based registration and signal processing. Here we introduce a parameterization method based on Riemann surface structure, which uses a special curvilinear net structure (conformal net) to partition the surface into a set of patches that can each be conformally mapped to a parallelogram. The resulting surface subdivision and the parameterizations of the components are intrinsic and stable (their solutions tend to be smooth functions and the boundary conditions of the Dirichlet problem can be enforced). Conformal parameterization also helps transform partial differential equations (PDEs) that may be defined on 3-D brain surface manifolds to modified PDEs on a two-dimensional parameter domain. Since the Jacobian matrix of a conformal parameterization is diagonal, the modified PDE on the parameter domain is readily solved. To illustrate our techniques, we computed parameterizations for several types of anatomical surfaces in 3-D magnetic resonance imaging scans of the brain, including the cerebral cortex, hippocampi, and lateral ventricles. For surfaces that are topologically homeomorphic to each other and have similar geometrical structures, we show that the parameterization results are consistent and the subdivided surfaces can be matched to each other. Finally, we present an automatic sulcal landmark location algorithm by solving PDEs on cortical surfaces. The landmark detection results are used as constraints for building conformal maps between surfaces that also match explicitly defined landmarks.     

相机添加手机功能有无必要?

如果说在手机中引入照相功能无可厚非的话,那么在相机中添加手机功能就有些匪夷所思了。有这种想法的相机厂商究竟在思考些什么?     

Physical Mechanisms behind the Field‐Cycling Behavior of HfO2‐Based Ferroelectric Capacitors

Novel hafnium oxide (HfO₂)‐based ferroelectrics reveal full scalability and complementary metal oxide semiconductor integratability compared to perovskite‐based ferroelectrics that are currently used in nonvolatile ferroelectric random access memories (FeRAMs). Within the lifetime of the device, two main regimes of wake‐up and fatigue can be identified. Up to now, the mechanisms behind these two device stages have not been revealed. Thus, the main scope of this study is an identification of the root cause for the increase of the remnant polarization during the wake‐up phase and subsequent polarization degradation with further cycling. Combining the comprehensive ferroelectric switching current experiments, Preisach density analysis, and transmission electron microscopy (TEM) study with compact and Technology Computer Aided Design (TCAD) modeling, it has been found out that during the wake‐up of the device no new defects are generated but the existing defects redistribute within the device. Furthermore, vacancy diffusion has been identified as the main cause for the phase transformation and consequent increase of the remnant polarization. Utilizing trap density spectroscopy for examining defect evolution with cycling of the device together with modeling of the degradation results in an understanding of the main mechanisms behind the evolution of the ferroelectric response.     

A graphical approach for confidence limits of optimal preventive maintenance cycles

Facilities management (FM) is the management of infrastructure resources and services to support and sustain the operational strategy of an organization over time. Maintenance is often the business process that has not been optimized and is considered as a liability of business operations. Therefore, extensive studies have been done to determine the optimal replacement interval for irreparable parts of repairable systems where typically the time between failures is characterized by lifetime distribution in which the parameters are estimated from failure data. As a result, the optimal preventive maintenance (PM) interval computed is exposed to sampling risk as the repair cost and failure data used for estimation are typically highly censored due to issues related to data collection and unobserved failures. In this paper, we present a graphical approach to obtain the confidence interval for the optimal PM interval that resulted from sampling variations parameter estimates. The proposed methodology is applied in the context of FM as a strategy for opportunistic replacement and for the purpose of validating the cost components in maintenance. Copyright © 2008 John Wiley & Sons, Ltd.     

Association of the serotonin transporter gene promoter region (5-HTTLPR) polymorphism with biased attention for emotional stimuli.

A deletion polymorphism in the serotonin transporter-linked polymorphic region (5-HTTLPR) has been associated with vulnerability to affective disorders, yet the mechanism by which this gene confers vulnerability remains unclear. Two studies examined associations between the 5-HTTLPR polymorphism and attentional bias for emotional stimuli among nondepressed adults. Biased attention, attention engagement, and difficulty with attention disengagement were assessed with a spatial cuing task using emotional stimuli. Results from Study 1 (N = 38) indicated that short 5-HTTLPR allele carriers experienced greater difficulty disengaging their attention from sad and happy stimuli compared with long allele homozygotes. Study 2 participants (N = 144) were genotyped for the 5-HTTLPR polymorphism, including single nucleotide polymorphism rs25531 in the long allele of the 5-HTTLPR. Consistent with Study 1, individuals homozygous for the low-expressing 5-HTTLPR alleles (i.e., S and LG) experienced greater difficulty disengaging attention from sad, happy, and fear stimuli than high-expressing 5-HTTLPR homozygotes. Because this association exists in healthy adults, it may represent a susceptibility factor for affective disorders that becomes problematic during stressful life experiences. (PsycINFO Database Record (c) 2010 APA, all rights reserved)