Monodisperse and 1D Cross-Linked Multi-branched Cu @ Ni Core–Shell Particles Synthesized by Chemical Reduction

We report on a two-step wet chemical route for producing Cu@Ni core–shell particles with multiple needle-like branches on the surface. Using the usual synthesis process, urchin-like Ni shells were formed on the surface of spherical Cu cores and monodisperse particles were obtained. Under the direction of a static magnetic field, one-dimensional, well-aligned Cu@Ni particles were assembled through cross-linking the branched Ni shells. The monodisperse Cu@Ni particles show stable and uniform field electron emission, having a low turn-on field of 3.3 V/μm and a large current density of 1 mA/cm² under an applied field of about 5.33 V/μm.     

Steam reforming on Ni-samaria-doped ceria cermet anode for practical size solid oxide fuel cell at intermediate temperatures

Direct internal and external reforming operations on Ni-samaria-doped ceria (SDC) anode with the practical size solid oxide fuel cell (SOFC) at intermediate temperatures from 600 to 750 °C are carried out to reveal the reforming activities and the electrochemical activities, being compared with the hydrogen-fueled power generation. The cell performance with direct internal and external steam reforming of methane and their limiting current densities were almost the same irrespective of the progress of reaction in the methane reformate at 700 and 750 °C. The durability test for 5.5 h at 750 °C with direct internal reforming operation confirmed that the cell performance did not deteriorate. The operation temperature of the cell controlled the reforming activities on the anode, and the large size electrode gave rise to high conversion due to the slow space velocity of the steam reforming. Direct internal steam reforming attained sufficient level of conversion for SOFC power generation with methane at 700 and 750 °C on the large Ni-SDC cermet anode.     

Twin-electron biprism

In order to obtain a large deflection angle without increasing the applied voltage to an electron biprism, we have developed a 'twin-electron biprism' (TBP), which is composed of two filament electrodes and a pair of ground plates. The observed interference-fringe spacing revealed that the deflection angle created by a TBP was about twice larger than that by a 'conventional electron biprism'. Also, we have suggested, in a double-electron biprism interferometry, the optimal disposition of a TBP for reducing the intensity of Fresnel fringes recorded in an electron hologram.     

Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties

Tribological properties of a diamond-like carbon (DLC) coating with an adhesive tungsten-containing DLC (W-DLC) layer were investigated. The coatings were deposited onto AISI316L steel substrates and Si wafers using plasma enhanced chemical vapor deposition and tungsten co-sputtering of the metal target. Methane and argon gases were used as the precursor of the coatings. In this study, three types of coatings were evaluated: DLC/W-DLC on AISI316L (DLC-1), DLC/W-DLC on Si wafer (DLC-2), and DLC on Si wafer (DLC-3). The structural characterizations were performed by transmission electron microscopy and tapping mode atomic force microscopy. At the boundary between the W-DLC layer and the AISI316L substrate, microscopic decohesion or delamination was not observed. The surface roughness of the DLC-1 coating was greater than that of the DLC-2 coating. This feature was derived from the surface roughness of the initial surface of the AISI316L substrate. Friction tests were performed using a rotation-type ball-on-flat configuration tribometer. The observed friction of the DLC-1 coating was unstable compared with the DLC-2 or DLC-3 coatings. This was due to wear debris which had risen to the friction surface resulting in unstable friction on the DLC-1 coating. During the friction studies, the top DLC layer was removed from the adhesive W-DLC layer because the adhesive strength at this part was not enough. In order to achieve the low and stable friction of the DLC coating with the W-DLC layer on AISI316L, it is necessary to improve the smoothness of the surface and the adhesion between the DLC coating and the W-DLC layer.     

Novel sugar phosphotransferase system applicable to the efficient labeling of the compounds synthesized via the non-mevalonate pathway in Escherichia coli

It is known that 1-deoxy-D-xylulose taken up by Escherichia coli is used as the precursor of the compounds synthesized via the non-mevalonate pathway, such as isoprenoids, probably after conversion into 1-deoxy-D-xylulose 5-phosphate. In this report, we show that a novel phospho(enol) pyruvate-dependent phosphotransferase system catalyzes the uptake and phosphorylation of 1-deoxy-D-xylulose.     

Effects of scatter and attenuation correction on quantitative assessment of regional cerebral blood flow with SPECT

The pyruvate dehydrogenase complex (PDC) plays a key role in the anaerobic mitochondrial metabolism of the parasitic nematode Ascaris suum. A cDNA coding for an A. suum pyruvate dehydrogenase kinase (APDK) has been cloned and sequenced from poly(A)+ RNA isolated from adult A. suum muscle.2 APDK exhibited significant sequence identity to mammalian PDKs. Nucleotide sequence analysis of the APDK cDNA revealed a 22-nucleotide spliced leader, characteristic of many nematode mRNAs, a 5'-UTR of 6 nucleotides, an open reading frame of 1197 nucleotides, and a 3'-UTR of 101 nucleotides that included a putative polyadenylation signal. The open reading frame predicted a protein of 399 amino acids with a molecular weight of 45,402 that included a putative 18-aminoacid leader peptide. Recombinant APDK (rAPDK) was functionally expressed in Escherichia coli with a his tag at its N-terminus and purified to apparent homogeneity on Ni-NTA-agarose. Recombinant APDK was a dimer and was not autophosphorylated and its activity was stimulated in the presence of APDK-deficient adult A. suum muscle PDC presumably by the binding of APDK to the dihydrolipoyl transacetylase (E2) core of the complex. After binding to the core, rAPDK activity was stimulated by elevated NADH/NAD+ and acetyl CoA/CoA ratios within the same ranges as observed for the native APDK. Immunoblotting suggested that native APDK focused as a series of 43-kDa spots (pI 6.1-6.8) on two-dimensional gels of the purified adult A. suum muscle PDC.     

Nucleotide sequencing analysis of the 146-kilobase segment around the IkBL and MICA genes at the centromeric end of the HLA class I region

The biomechanics of medialization laryngoplasty are not well understood. An excised canine larynx model was used to test the effects of various sized silicon implants. The vocal fold length, position, and tension were measured. Medialization laryngoplasty did not affect vocal fold length. At the mid-membranous vocal fold, larger shims resulted in greater medialization and tension. Medialization laryngoplasty neither medialized nor stiffened the vocal process to resist lateralizing forces. We conclude that medialization laryngoplasty provides bulk and support for defects of the membranous region of the vocal fold, but does not appear to close a posterior glottal gap. The selection of a surgical procedure to treat glottal incompetence should take into account the unique biomechanical properties of the anterior (membranous vocal folds) and posterior (cartilaginous portion) glottis.     

Wind energy planning: Development and application of a site selection method for wind energy conversion systems (WECS)

The use of wind energy by means of its conversion to electricity involves a number of constrains such as economic, environmental, technical, legal, social and institutional requirements. Planning for wind energy should solve these issues in the planning process by encouraging opportunities and discouraging constraints associated with the use of wind energy. The opportunities and constraints significant at the regional level (i.e. approximately 10,000 km²) were identified, and a systematic method was developed to select sites for large WECS by incorporating the identified factors. These factors include: wind resource, proximity to load centres, proximity to tie-in points, and exclusive land-use areas. The developed method was applied to the western Massachusetts region, and the first results of the study have been acquired.